Industrial Cooling Equipment For Water And Wastewater Available In Kyrgyzstan
-
ShowcaseManufactured by Enerpat Groupbased in CHINA
MSA-F Series Single Shaft Shredders are small to medium size reduction machines suitable for processing a wide range of materials to a uniform particle size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughputs typically range between300kg/hr –5,000kg/hr+ depending on the model, material type and ...
-
ShowcaseManufactured by Respirometer Systems and Applications, LLC (RSA)based in USA
When operating in the aerobic mode, oxygen – from a supply of pure oxygen – is added in small increments into each respirometer vessel in response to oxygen uptake and carbon dioxide absorption. This mode of operation maintains a constant oxygen concentration in the headspace within the reaction vessel. Oxygen transfer from the headspace to the liquid phase is accomplished by using ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Excalibur Water Systems’ Simplex Cooling Tower Side Stream Filters are designed for applications with a steady demand capacity of filtered water during a specific period. Regeneration, during which time no filtered water supply to the cooling tower is available, is then programmed to occur at a pre-set time. For this reason, Simplex Cooling Tower Sidestream Filters are typically sized to ...
-
PremiumManufactured by Myron L Companybased in USA
ULTRAPEN PT5 High Performance Features: Industry Leading Accuracy. Display DO in Concentration, % Saturation, or Both. Adjustable for Altitude and Salinity. 3 Calibration Methods: Air, Water and 0 ppm DO. Dynamic Membrane Temperature Correction. Live or Hold Mode - User Selectable. Auto-Off Feature - User Adjustable. Proprietary Sensor Design. Easy to Use - One Button Control. Rugged Design with ...
-
PremiumManufactured by Myron L Companybased in USA
All Myron L handheld instruments are factory calibrated with NIST traceable Standard Solutions having specific conductivity/ppm values. MyronL Company Standard Solutions are made under strictly controlled conditions using reagent grade salts. These salts are mixed with deionized water having a resistivity of at least 5 megohms-cm ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
KOMFORTO benches are designed for LC/MS systems. Various dimensions and models are available, all easy to configure with a modular design to meets user needs. The benches are made with chemical resistant top, castors for easy moving of the system and levelling feet, and adjustable leveling feet for rock solid stability of the bench. As LC/MS systems need at least nitrogen and could have ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Refrigerated CentriVap Centrifugal Concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. This exclusive concentrator combines a refrigeration system that cools to -4º C with a heater that warms to 100º C to achieve the user’s desired set point ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The Biometra Multigel product family includes 3 different double-gel models for gel-based high-resolution protein and nucleic acid electrophoresis. Specially designed for everyday laboratory work, the systems are made of robust, high-quality acrylic glass and the simple operating concept enables a quick and intuitive ...
-
PremiumManufactured by Jenfitch INC.based in USA
JC 9465 can effectively remove biofilm from potable water distribution systems, cooling water systems, fruits & vegetables, oil & gas producing wells, and air scrubbing systems. JC 9465 eliminates the EPS (extra polymeric substance) that prevents disinfectants from killing pathogens. By simply using JC 9465 to raise the ORP, JC 9465 will dissolve the biofilm and prevent its reappearance. ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
MODULO benches are designed for GC/MS systems. Various dimensions and models are available, all easy to configure with a modular design to meet user needs. The benches are equipped with sturdy wheels for easy moving of the system, and adjustable levelling legs for rock solid stability of the bench. GC system may need quite a lot of different generators, our MODULO benches has 2 Two 13U racks ...
-
PremiumManufactured by Shanghai Metash Instruments Co.,Ltd.based in CHINA
1. Automatic sample dilution, acid-adding and gas purging. 2. 680? catalytic oxidation technology with Platinum catalyst, especially for sea- water test. 3. Imported NDIR detector, guaranteeing higher sensitivity and stability. 4. Optional 20-position autosampler saves 80% time and energy. 5. Modular design, simplifying device operation and ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Reduction Of Risk Of Legionella Pneumophila In Open Cooling Circuits; Time and again news report about outbreaks of legionella disease in areas near cooling towers. Careful water treatment, together with regular maintenance reduces the risk of bacteria growth in the cooling circuit. But one step more leads to an even higher performance of these measures: the use of anti-legionella components. ...
-
PremiumManufactured by Labconco Corporationbased in USA
FreeZone 2.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84° C (-119° F), suitable for samples with low eutectic points including ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the ...
-
PremiumManufactured by Myron L Companybased in USA
ULTRAPENx2 PTBT5 Benefits: Reliable repeatable results. accurate. affordable. easy to use. rugged design. ensure product quality. reduce waste. protect the ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The “economic” 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The only difference with the “basic” 200 kN CPT crawler is the fact, that the working cabin is made of tarpaulin, as where the “basic” crawler features a working cabin made of insulating sandwich panels. The rig has been designed to execute soil mechanical research ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 1903 high-pressure plunger pump provides a max. operating pressure of 250 bar and a max. flow rate of 279 l/min. The ultra high-pressure pumps of the 03-series with operating pressures up to 250 bar and flow rate up to approx. 400 l/min, are the specialist for descaling as well as for cleaning of sewers and pipes. In addition to the corrosion-resistant stainless steel version, WOMA also ...
-
Premiumbased in NETHERLANDS
Chlorine dioxide(ClO2) is a technology which has been historically applied at large scale (recirculation) cooling water systems. Additionally, chlorine dioxide generators are being increasingly used as an alternative to chlorine generators in water treatment/disinfection processes, as they release lower quantities of toxic impurities into the atmosphere as compared to conventional chlorine based ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI provides temperature transmitters mounted in thermowells with integral or remote solid state electronics housed in protective hermetically or environmentally sealed enclosures for direct installation into piping and ducting on commercial and military aircraft, spacecraft, vehicles and marine applications. These transmitters utilize highly reliable Resistance Temperature Detector (RTD) ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you