Only show results available in Virginia? Ok

Digester Mixer (Industrial Mixing) equipment

  • Showcase

    ExtremeDuty™ - Sludge Mixer

    WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven to be ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Anaerobic Digestion Product line

  • OTI - Model SB Series - Digester Mixers

    Mounted on and supported by concrete, steel or stainless steel digester covers. Models available for fixed, floating or gasholder digester cover designs. Designs available to fit existing OTI draft tubes or mixer draft tubes not originally provided by OTI. Upper draft tube and seal cylinder is supported by the cover and moves with floating covers. ...

    By Olympus Technologies, Inc. (OTI) based in Eugene, OREGON (USA). from Digester Mixers Product line

  • OTI - Model N Series - Digester Mixers

    Mounted on and supported by concrete, steel or stainless steel digester covers. Models available for fixed, floating or gasholder digester cover designs. Designs available to fit existing OTI draft tubes or mixer draft tubes not originally provided by OTI. Telescoping draft tube designs allow effective top-to-bottom or bottom-to-top mixing ...

    By Olympus Technologies, Inc. (OTI) based in Eugene, OREGON (USA). from Digester Mixers Product line

  • OTI - Model E - Digester Mixers

    Mounted outside the digester tank wall and supported on a concrete foundation. Designs available to fit existing OTI draft tubes or mixer draft tubes not originally provided by OTI. Upper and lower wall intake/discharge nozzles terminate with 45° elbows to promote effective mixing. Designs are well suited to add heat exchanger sections as part ...

    By Olympus Technologies, Inc. (OTI) based in Eugene, OREGON (USA). from Digester Mixers Product line

  • ROTARIA - Digestate Mixer

    The large propeller mixer Amaprop 2500 provides a very good mixing performance at low energy cost. Because of the low revolution speed of the large propeller with 2.5m diameter and their optimised geometric profile, these mixers provide a very good thrust to load ratio. The large mixers are fitted to a pylon inside of the digester and can be ...

    By ROTARIA Energie- und Umwelttechnik based in Rerik, GERMANY.

  • JFE - Model Dynamixer Series - Digestion Mixer

    The anaerobic digestion of sludge is a process intended to reduce the volume of sludge, stabilize its quality, and maintain hygienic safety through the decomposition of organic substances. The proper retention time for digestion, proper digestion temperature and the thorough mixing of sludge to be digested are some of the parameters required for ...

    By JFE Engineering America Inc. based in Long Beach, CALIFORNIA (USA). from Aqua Product line

  • Premium

    AIRE-O2 - Slow-speed, Variable Angle Mixer

    Simple, nearly maintenance free above surface mixing. The Aire-O2 Mixer ensures simple, nearly maintenance free operation with above surface float or fixed mounting options. The variable angle mixer performs in corrosive environments with no gear box and low power consumption in aeration tanks, oxidation ovals, digesters, lagoons, anoxic basins, ...

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA). from Mixers Product line

  • Premium

    Ovivo - Model LM - Vertical Linear Motion Mixer

    LM™ mixer is designed to mix various sludge types in all anaerobic digestion applications, in order to achieve a homogeneous mixture in tanks, while using up to 70% less power than with conventional mixers. The LM™ mixer oscillating motion produces a flow pattern that approaches nearly isotropic (uniform) mixing without the turbulence ...

  • Premium

    Eimix - Mechanical Sludge Mixers

    Anaerobic digestion is highly dependent upon effective sludge mixing. When tank contents are inadequately mixed, stratification occurs and the volume is not properly utilized. Ovivo's Eimix® sludge mixers are designed to provide powerful mixing without accumulating stringy or fibrous material. In addition, the use of reversing motors enables ...

  • Claro - Model Big Bubble Gun - Gas Mixers

    Claro Big Bubble Gun™ Mixer systems are a proven anaerobic digester mixing technology that significantly reduces sludge disposal volumes and disposal costs, provides greater volatile solids destruction and overall biogas production, reduces sludge dewatering costs and presents almost no oversight or maintenance requirements. This superior ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • AccuBubble - Electronic Gas Mixer Monitoring

    AccuBubble™ is an electronic monitoring system that fully automates the oversight of large gas piston-bubble mixers in anaerobic digester facilities. Continually tracking the performance of all digester mixers, AccuBubble ensures the efficiency of the mixing system and of the anaerobic digestion process for optimal biogas production and ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Claro - Retrofit Of Existing Mixers

    Claro's Mixer Retrofit Program modernizes existing gas and internal-to-tank mechanical draft tube mixers by installing fully-flushable, non-clog Big Bubble Gun Mixer™ bubble injectors onto the existing draft tube mixer units. Custom-designed, manufactured, and installed within a few weeks of purchase order, our rapid response retrofits ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • SUMA - Model Optimix 2G - Submersible Mixer for Biogas Digesters

    This powerful ATEX certified submersible mixer (4.0, 9.0 or 15 kW) now offers even more possibilities to achieve optimal gas flow and mixing results in your biogas digester.

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY. from Submersible Motors for Biogas Digesters Product line

  • Circular Shape Tanks

    circular shape: for small/medium plants, or when materials in digester appear diluted (secondary and tertiary); mass mixing is carried out by mere mixers;

    By Biogas Engineering S.r.l based in Scanzorosciate (BG), ITALY. from Anaerobic Digestion Product line

  • Claro Hybrid Digester Mixing Systems

    Claro provides hybrid digester mixing systems for municipal, agricultural, food processing, and industrial applications. As an innovator of digester mixing concepts, we can apply the most efficient and cost-effective single or hybrid mixing technology for your application: Big Bubble Gun™ biogas piston-bubble mixers or Big Bubble piston-bubble ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Biogas Storage & Biogas Digester Covers

    Claro offers a complete range of biogas storage, gas liquification, and digester cover technologies including: Double Membrane Gas Holders: Selected features: ultra durable construction; designed to suit a wide range of applications; free-standing or installed on top of steel and concrete storage tanks; various combinations of gas pressures, ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • OTI - Fixed Digester Covers

    Least expensive of all OTI’s digester covers to design, produce and to install. Normally is used where sludge level in the digester does not vary significantly. The cover is supported at the top of the digester tank wall on bearing plates and restrained from upward forces with anchoring saddles. Custom designed for specific project loads ...

    By Olympus Technologies, Inc. (OTI) based in Eugene, OREGON (USA). from Digester Covers Product line

  • Biotec - Mixer for Anaerobic Digesters

    Mixer for anaerobic digesters produced by Biotec Sistemi consts of a paddle mixer designed for the handling of big volume of substrate during fermentation. Its structure and characteristics are studied by Biotec Sistemi with the aim to obtain an equipment with high resistance to internal conditions of a digesters, in order to ensure an adequate ...

    By Biotec Sistemi S. r. l. based in Genova, ITALY.

  • Dry-Installed Mixer (300 RPM) PowerMix POPTR-I

    Dry-installed mixer for waste water treatment plants, biogas plants and various industries. Can be installed in steel and concrete tanks. Five motor sizes from 5.5 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 1400 N to 5000 N.

    By Landia based in Lem, DENMARK. from Mixers - Dry-Installed Mixers Product line

  • Eddy Jet Mixers

    Two eddy jet mixers with 16-inch liquid flanges ready for shipment. Eddy jet mixer during tank fill-up Eddy jet mixer during tank fill-up. Single eddy jet mixer Single eddy jet mixer installed in the center of the 65 ft diameter tank. Mini jet mixer One of two eddy jet mixers in two 16.5 ft diameter tanks. 30-inch eddy jet mixer One 30-inch ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Mixers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you