We couldn't find any digester mixer equipment suppliers or service providers located in Afghanistan

Here is a list of equipment results with suppliers serving Afghanistan

digester mixer Equipment available in Afghanistan

  • JFE - Model Dynamixer Series - Digestion Mixer

    The anaerobic digestion of sludge is a process intended to reduce the volume of sludge, stabilize its quality, and maintain hygienic safety through the decomposition of organic substances. The proper retention time for digestion, proper digestion temperature and the thorough mixing of sludge to be digested are some of the parameters required for ...

    By JFE Engineering America Inc. based in Long Beach, CALIFORNIA (USA). from Aqua Product line

  • Premium

    WesTech ExtremeDuty™ - Sludge Mixer

    WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Anaerobic Digestion Product line

  • Premium

    AIRE-O2 - Slow-speed, Variable Angle Mixer

    Simple, nearly maintenance free above surface mixing. The Aire-O2 Mixer ensures simple, nearly maintenance free operation with above surface float or fixed mounting options. The variable angle mixer performs in corrosive environments with no gear box and low power consumption in aeration tanks, oxidation ovals, digesters, lagoons, anoxic basins, ...

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA). from Mixers Product line

  • Premium

    ennox - Model GAD - Gas Dome

    Gas domes serve to collect and discharge the produced gases as well as support for various additional digester installations such as mixers, foam traps, inspection windows, pressure safety valves and measurement components.

    By ennox biogas technology GmbH based in Hard, AUSTRIA. from Digester Equipment Product line

  • Claro - Model Big Bubble Gun - Gas Mixers

    Claro Big Bubble Gun™ Mixer systems are a proven anaerobic digester mixing technology that significantly reduces sludge disposal volumes and disposal costs, provides greater volatile solids destruction and overall biogas production, reduces sludge dewatering costs and presents almost no oversight or maintenance requirements. This superior ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Claro - Retrofit Of Existing Mixers

    Claro's Mixer Retrofit Program modernizes existing gas and internal-to-tank mechanical draft tube mixers by installing fully-flushable, non-clog Big Bubble Gun Mixer™ bubble injectors onto the existing draft tube mixer units. Custom-designed, manufactured, and installed within a few weeks of purchase order, our rapid response retrofits ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • AccuBubble - Electronic Gas Mixer Monitoring

    AccuBubble™ is an electronic monitoring system that fully automates the oversight of large gas piston-bubble mixers in anaerobic digester facilities. Continually tracking the performance of all digester mixers, AccuBubble ensures the efficiency of the mixing system and of the anaerobic digestion process for optimal biogas production and ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • SUMA - Model Optimix 2G - Submersible Mixer for Biogas Digesters

    This powerful ATEX certified submersible mixer (4.0, 9.0 or 15 kW) now offers even more possibilities to achieve optimal gas flow and mixing results in your biogas digester.

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY. from Submersible Motors for Biogas Digesters Product line

  • Biogas Storage & Biogas Digester Covers

    Claro offers a complete range of biogas storage, gas liquification, and digester cover technologies including: Double Membrane Gas Holders: Selected features: ultra durable construction; designed to suit a wide range of applications; free-standing or installed on top of steel and concrete storage tanks; various combinations of gas pressures, ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Claro Hybrid Digester Mixing Systems

    Claro provides hybrid digester mixing systems for municipal, agricultural, food processing, and industrial applications. As an innovator of digester mixing concepts, we can apply the most efficient and cost-effective single or hybrid mixing technology for your application: Big Bubble Gun™ biogas piston-bubble mixers or Big Bubble piston-bubble ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • Dry-Installed Mixer (300 RPM) PowerMix POPTR-I

    Dry-installed mixer for waste water treatment plants, biogas plants and various industries. Can be installed in steel and concrete tanks. Five motor sizes from 5.5 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 1400 N to 5000 N.

    By Landia based in Lem, DENMARK. from Mixers - Dry-Installed Mixers Product line

  • Cannon Mixer Anaerobic Digestion System

    The Cannon® Mixer is a proven anaerobic digester mixer. Using large distinct bubbles, the Cannon® Mixer combines integral mixing and heating within one tank. The result is a reduction of volatile solids and sludge volume, greater overall gas production, and improved sludge dewatering.

    By Degremont Technologies - a subsidiary of Suez Environnement based in Dübendorf, SWITZERLAND. from Infilco Degremont Line Product line

  • Eddy Jet Mixers

    Two eddy jet mixers with 16-inch liquid flanges ready for shipment. Eddy jet mixer during tank fill-up Eddy jet mixer during tank fill-up. Single eddy jet mixer Single eddy jet mixer installed in the center of the 65 ft diameter tank. Mini jet mixer One of two eddy jet mixers in two 16.5 ft diameter tanks. 30-inch eddy jet mixer One 30-inch ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Mixers Product line

  • Model AER-SB (L) - Fixed Bottom Aerator

    As a bottom mounted aerator and with intensive mixing action it is ideal for deep tanks, moderate to high solids concentrations and also re-suspension of settled solids. Available with or without channels and in self-aspirating and blower versions depending on basin dimensions and oxygen demand.

    By Aquaturbo Systems, Inc. based in Springdale, ARIZONA (USA). from Aerotors & Mixers Product line

  • Model AER-F (ES) - Fixed Surface Aerator

    Designed for bridge or platform mounting in basins with fixed or minimal water level variation. Can be installed and removed as a fully assembled unit through a hole in the platform without draining the basin. The length can be manufactured to suit virtually any platform to water level measurement.

    By Aquaturbo Systems, Inc. based in Springdale, ARIZONA (USA). from Aerotors & Mixers Product line

  • Model AER-AS - Floating Surface Aerator

    Axial flow aerator with patented instantaneous radial discharge. World renowned for high aeration efficiency in field conditions due to maximum transfer of kinetic energy to water surface. Installations range from small tanks to massive lagoons due to exceptional mixing and oxygen dispersion.

    By Aquaturbo Systems, Inc. based in Springdale, ARIZONA (USA). from Aerotors & Mixers Product line

  • Sitrex - Model Premier-110 - Premier Mixer Feeders

    SITREX presents a new range of livestock feeding machines.Self-propelled and trailed models.Over the years, SITREX has distinguished itself by innovation an invested on research and technology for the construction of new products to be included in its range.The production of Feed Mixers is the achievement of this goal,  These machines have ...

    By Sitrex Spa based in Trestina, ITALY. from Sitrex Premier Mixer Feeders Product line

  • Model AF - Submersible Flowmakers

    Flowmakers are used in waste water treatment, namely in nitrification, denitrification, activated sludge treatment and disinfection tanks. These mixers are also applied in industrial mixing, chlorination tanks and digesters of biogas plants used to homogenize, destratify and prevent formation of surface hardpans. The slow rotation of blades, ...

    By SCM Tecnologie based in San Giorgio (MN), ITALY. from Wastewater Treatment - Mixers Product line

  • DeTech - Model MS Series - Submersible Mixer

    MS Submersible mixer is designed to applicate widely in waste water treatment, especially for mixing, sludge digestive, tank, suspend solids decrease, circulation etc. It can operate smoothly in the conditions as following:

    By DeTech Pumps Co. Ltd. based in Nanjing, CHINA.

  • Jet Mixers

    Fluidyne Jet mixers can be used in a wide variety of wastewater applications including flow equalization basins, CSO tanks, anoxic reactors, anaerobic digesters, SBRs, oxidation ditches and flash mix tanks. Fluidyne’s jet mixing systems are simple, cost effective and available for new installations or for retrofit in existing tanks.

    By Fluidyne Corporation based in Cedar Falls, IOWA (USA). from Aeration / Mixing Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you