We couldn't find any jet mixing equipment suppliers or service providers located in South Korea

Here is a list of equipment results with suppliers serving South Korea

Jet Mixing (Industrial Mixing) equipment available in South Korea

  • KLa - Jet Mixing System

    Jet Mixers offer superior independent control of mixing and oxygen transfer in aerobic/anoxic processes and creates excellent energy distribution while minimizing power input in large tanks. This mixing technology results in better energy distribution and decreased reaction times.

    By KLa Systems, Inc. based in Assonet, MASSACHUSETTS (USA).

  • Jet Mixing Systems

    The MTS jet mixing systems are a highly turbulent submerged mixer technology.  Jet mixing is a hghly efficient method to distribute mixing energy while minimizing horsepower requirements. Each MTS mixing jet nozzle consistes of of two liquid nozzles nested together.  The primary flow is typically provided by either a dry-pit or ...

    By Mass Transfer Systems (MTS) based in Walpole, MASSACHUSETTS (USA). from Other Products Product line

  • Aipu Solids control - Model SLH - Jet mud mixing pump

    Mud mixing pump including 2 types. One is the jet mixing pump the other is the swirl hopper pump. Aipu provide you flexible and optimal options on mud mixing pump. The detail is as below:1.Hoppers can be Venturi hopper or Swirl hopper2.Ideal design on sufficient working pressure make pumps higher performance3.New style with better feasibility ...

  • Jet Mixers

    Fluidyne Jet mixers can be used in a wide variety of wastewater applications including flow equalization basins, CSO tanks, anoxic reactors, anaerobic digesters, SBRs, oxidation ditches and flash mix tanks. Fluidyne’s jet mixing systems are simple, cost effective and available for new installations or for retrofit in existing tanks.

    By Fluidyne Corporation based in Cedar Falls, IOWA (USA). from Aeration / Mixing Product line

  • Eddy - Mix Jet Aerators

    Eddy mix jet aerator installed in the center of a cone-bottom tank.Single eddy mix jet aerator in center of 65 ft diameter, cone-bottom tank. Liquid surface during aeration is also shown. FRP eddy mix jet aerator with 12-inch liquid line and 8-inch air line.Eddy mix jet aerator installed on the end of a directional mix jet aerator. Other ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Aerators Product line

  • Jet Aspiration System

    Jet aspiration is a simple, efficient and cost effective solution to wastewater treatment and mixing problems. Liquid from the tank is pumped through a specially designed double nozzle assembly which aspirates air into the mixing section. The combined air/liquid plume is then discharged below the surface to provide high oxygen transfer and ...

    By Fluidyne Corporation based in Cedar Falls, IOWA (USA). from Aeration / Mixing Product line

  • Directional Mix Jet Aerators

    One of six directional mix jet aerators installed in a circular tank. Two of the six directional mix jet aerators installed in a 180 ft diameter tank for a pulp and paper mill. Four directional mix jet aerators installed in a 650 ft by 230 ft lagoon creating an oxidation ditch flow pattern. Large directional mix jet aerator (one of seven) with a ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Aerators Product line

  • PAX Water - Active Jet Mixer for Small Tanks

    PAX Water’s jet mixers create a powerful vortex flow pattern inside small to mid-sized water storage tanks. Lightweight and compact, these mixers are easy to install and provide cost and labor savings, making it an economical purchase for utilities with a tight budget.

    By PAX Water Technologies, Inc. based in Richmond, CALIFORNIA (USA). from Active Tank Mixing Product line

  • Directional Jet Mixers

    Multiple directional jet mixers are arrayed in a circular channel. Two directional jet mixers completely mix a 194 ft (59 M) diameter tank. Four directional jet mixers create a counter-clockwise flow pattern in a circular tank. Manufacture of directional jet mixers with 8-inch liquid line and FRP supports. Two directional jet mixers are arranged ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Mixers Product line

  • Stainless Steel Jet Aerators

    Stainless steel jet aerator for sulphite oxidation. Bidirectional mix jet aerator constructed of 316 stainless steel.Custom designed bidirection mix jet aerator mixes liquid, air and methane gas. Eddy mix jet aerator One of two eddy mix jet aerators with six nozzles each. Bidirectional mix jet aerator Stainless steel bidirectional mix jet aerator ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Aerators Product line

  • Eddy Jet Mixers

    Two eddy jet mixers with 16-inch liquid flanges ready for shipment. Eddy jet mixer during tank fill-up Eddy jet mixer during tank fill-up. Single eddy jet mixer Single eddy jet mixer installed in the center of the 65 ft diameter tank. Mini jet mixer One of two eddy jet mixers in two 16.5 ft diameter tanks. 30-inch eddy jet mixer One 30-inch ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Mixers Product line

  • Bidirectional Jet Aerators

    Four bidirectional mix jet aerators in round tank for a paper manufacturer. Three bidirectional mix jet aerators Three bidirectional mix jet aerators in an lagoon for a food manufacturer. Bidirectional mix jet aerator One of seven bidirectional mix jet aerators in an activated sludge lagoon for a pulp manufacturer. Bidirectional mix jet aerator ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Aerators Product line

  • Stainless Steel Jet Mixers

    20-jet stainless steel jet mixer. 24-jet Eddy jet mixer Custom designed 316 stainless steel eddy jet mixer with 24 nozzles. 14-jet eddy jet mixer Fourteen-jet, polished stainless steel eddy jet mixer. Close-up of an eddy jet mixer Close-up of an eddy jet mixer with twelve nozzles. Directional jet mixer Directional jet mixer made of 316 stainless ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Mixers Product line

  • Bidirectional Jet Mixers

    Manufacture of a bidirectional jet mixer. Bidirectional jet mixers Two bidirectional jet mixers with 6-inch liquid line and eight nozzles each. Bidirectional jet mixers Multiple bidirectional jet mixers ready for shipment.

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Mixers Product line

  • Self-Contained Jet Mixers

    This self contained unit has a 14 HP, Flygt submersible pump mounted directly above the jet mixer and can be installed without draining the tank. Self-contained eddy jet mixer with a 18 HP Davis EMU submersible pump mounted on top.

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Jet Mixers Product line

  • Vermeer - Model MX125 - Mixing System

    Optimize your horizontal directional drill’s performance with the MX125. Designed for small-diameter, short distance horizontal directional drilling jobs, the MX125 is powered by a 6.7 hp/5 kW Honda gas engine. It comes with your choice of a 300 gallon/1136 L or 500-gallon/1892-L tank.

    By Vermeer based in Pella, IOWA (USA). from Mix Systems Product line

  • Elgin - Model ESS-SM-500 - Jet-Shear Mud Mixing Systems

    Using our unique history as a provider of performance chemicals, Elgin has developed a line of drilling fluid jet shear systems.  Jet shear systems are designed to use hydraulic shear to efficiently mix solids with liquids. Elgin’s jet shear systems ensure efficient mixing of soluble polymers and bentonite used in water-based drilling ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Oil and Gas Products Product line

  • Directional Jet Manifold Aerators

    The Mass Transfer Systems directional jet aerators are designed with jet aeration nozzles installed on only side of the liquid / air jet aeration manifold. This configuration is most applicable for round tanks, lagoons, and ditches where directional flow patterns can be achieved to aid in the mixing of the tank contents.

    By Mass Transfer Systems (MTS) based in Walpole, MASSACHUSETTS (USA). from Jet Aeration Systems Product line

  • Cylindrical Pulse Jet Filters

    Nederman MikroPul's cylindrical pulse jet collectors are for high vacuum or high pressure applications. Typical applications include spray drying, separating, coal grinding, mixing, food manufacturing, car loading, and product receiving from process applications. Commonly filtered dusts include sander dust, fine lint, grain, and cellulose ...

    By MikroPul - a Nederman company based in Charlotte, NORTH CAROLINA (USA). from Pulse Jet Collectors Product line

  • UNIMIX - Model 24.0 - Mixing System

    Operation and features specification: Mixer: UNIMIX 24.0. Tank capacity: 1000 g. Engine: Honda 24.0 hp. Fuel type: Gasoline. Pump: 430 gpm. Tank Jets (high): 8. Valves: High pressure rate / non-corrosive.

    By Universal HDD based in Lake Zurich, ILLINOIS (USA). from Complete Mixing Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you