sludge mixer Equipment available in East Timor

Available in East Timor| Near East Timor
71 Results found

We couldn't find any sludge mixer equipment in East Timor

Here is a list of results available in East Timor

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Industrial Mixing ×

  • Keyword: sludge mixer ×

  • Available in: Asia & Middle East ×

  • Available in: East Timor ×

ExtremeDutyâ„¢ - Sludge Mixer

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven to be ...

Intereco - Model CONE - Conic Sludge Mixer

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Special conic mixer CONE useful to realise a good and continuous mixing between sludge and polyelectrolite solution. It is made with a conic part in which sludge is fed through a DN 100 PN 10 pipe, with a 90 degrees elbow and delivered through a DN 80 PN 10 flange. After the elbow and before the case, the flocculant is fed through four symmetric ...

Hydraulic Sludge Mixers

by Mixing Systems, Inc.     based in Dayton, OHIO (USA)

The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles ...

Lime/Sludge Mixer

by Simon Moos Maskinfabrik A/S     based in Sønderborg, DENMARK

Using the MOOS lime stabilization unit results in a very efficiently sanitized end product, which has a markedly improved consistency. Lime stabilized sludge can be re-used to improve soil quality and is a valuable fertilizer.


by ENTA Treatment Systems Engineering Contracting LTD     based in Istanbul, TURKEY

Mixing of the coagulant and chemicals with water is performed by ENTA mixer and flocculators. All impellent groups, motor, reducer and general project have a long life and strong structure. Mixer and flocculators shall be produced as coated (rubber, teflon, rilsan etc.) carbon steel or painted carbon steel, galvanized coated carbon steel or ...

AIRE-O2 Triton - Process Aerator/Mixer for Pulp And Paper

by Aeration Industries International (AII)     based in Chaska, MINNESOTA (USA)

Pulp and paper mills produce large volumes of wastewater and residual solids, presenting a number of issues in relation to wastewater treatment, discharge, and sludge disposal.

Sludge Static Mixer (Hi-Pass Sludge)

by Komax Systems, Inc.     based in Huntington Beach, CALIFORNIA (USA)

The KOMAX Hi-Pass Sludge Mixer is designed to effectively mix polymer solution into sludge flows prior to dewatering process. Polymer savings in excess of 25% can be achieved.

Vertical Dryer - Vertical Reactor - Evaporator - Helix Dryer

by AVA - Huep GmbH u. Co. KG     based in Herrsching, GERMANY

Design with single or double helix or as centre tube screw mixer AVA’s conical dryers have been developed for shorter processing periods, simultaneously granting maximum product protection. In AVA dryers of the series HVW, the product is moved along the heated drum wall. Additionally, the shaft as well as the helix may be heated, which leads to ...

AVA - Vertical Dryers

by AVA - Huep GmbH u. Co. KG     based in Herrsching, GERMANY

Operation volume: 20–80,000 liters. Design: with single or double helix or as a central tube screw. Ideal application: Short process times and gentle product handling.

Vertical Mixers for Industrial Mixing - Helix Mixer

by AVA - Huep GmbH u. Co. KG     based in Herrsching, GERMANY

The AVA conical mixers and dryers with their characteristic single or double helix were developed at the end of the 90s in order to find a solution to a problem that continually occurs with traditional conical devices with rotary screws. On the one hand is a risk of product contamination by means of transmission parts in the product chamber, and ...

Intereco - Model CRV Series - Vertical Cylindrical Reactor for the Best Sludge Flocculation

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Vertical cylindrical reactor CRV necessary to have the best flocculation, composed by a cylindrical hot dip zinc coated tank, is necessary for the sludge and poly mixing, made by a low speed mixer (18 rpm), to obtain the best sludge flocculation. The long contact time between sludge and poly before the sludge discharging, optimize the flocculant ...

Model CMD - Horizontal Submersible Mixers

by Caprari S.p.A.     based in Modena, ITALY

Horizontal submersible mixers with direct drive. For applications in nitrification/de-nitrification, sludge treatment and storage, disinfection tanks and industrial mixing. Available with cast-iron construction and stainless steel propeller or in a completely stainless steel version - AISI 316. Galvanic separation system for standard components ...

Paddle Mixers/Pug Mixers

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro paddle mixers / pug mill agitators are an effective severe-duty mixer for lime-stabilized sludge applications in wastewater treatment plants and for the mixing and agglomeration of a wide variety of other industrial, agricultural, and hygienic food materials. Mixing intensity, retention time, and product appearance is controlled by changing ...

OPEC - Model SRJ - Submerged Rotary Jet Mixer

by Oil Pollution Environmental Control Ltd     based in Birstall, Batley, UNITED KINGDOM

The SRJ submerged rotary jet mixer directs powerful jets of oil that sweep through the sludge on the floor of the oil storage tank and blends the soluble hydrocarbons into the total contents.


by Cheonbo Engineering Co.. Ltd.     based in Hwasung-City, SOUTH KOREA

With 2stage agitator attached to the bottom, sedimentation is prevented in sludge basin. Stable operation where it runs in a low speed ot S^-IS rpm and with a minimum power consumption.Support ot the bottom ot the agitator prevents it trom shaking and lengthens the lifespan.


by INVENT Umwelt-und Verfahrenstechnik AG     based in Erlangen, GERMANY

The INVENT HYPERPITCH®- Mixer add-on takes care about the reliable reduction of scum and floating sludge in anaerobic and anoxic basins.The HYPERPITCH®- Mixer add-on can easily be installed on the shaft of an existing INVENT HYPERCLASSIC®- Mixer.How can we support you with the planning, optimization, modernization of your plant, or ...



Mixers can be classified under three groups: Mixers of propeller, turbine, flocculator, etc. types, utilised to prepare solutions of a given volume and consisting of motor, impeller and shaft; Static mixers that agitate and mix different liquids by changing the flowrate; and Double -shaft spiral mixers used mostly in sludge dewatering plants, for ...

TURBOSTAR - Model TS - Mixer

by Fuchs Enprotec GmbH     based in Mayen, GERMANY

The directly driven FUCHS submersible TURBOSL4R Mixer TS-SUB is applied in storm water tanks, where it swirls up settled solids. In equalization basins, activated sludge basins and small sludge storage tanks it provides for proper mixing and circulation. The high-performance machine is simply designed and very sturdy. The special design of the ...

Submersible Stainless Steel Mixer (150 RPM) POPR-I

by Landia     based in Lem, DENMARK

Submersible agitator for waste water treatment plants and industry (stainless steel). Five motor sizes from 1.1 to 7.5 kW. Capacity up to approx. 3,850 m³/hour. 150 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Dry-Installed Mixer (300 RPM) PowerMix POPTR-I

by Landia     based in Lem, DENMARK

Dry-installed mixer for waste water treatment plants, biogas plants and various industries. Can be installed in steel and concrete tanks. Five motor sizes from 5.5 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 1400 N to 5000 N.

Related Terms for sludge mixer

Need help finding the right suppliers?

Let the XPRTs do the work for you