We couldn't find any sludge mixer equipment suppliers or service providers located in Georgia

Here is a list of equipment results with suppliers serving Georgia

Sludge Mixer (Industrial Mixing) equipment available in Georgia

  • Premium

    ExtremeDuty™ - Sludge Mixer

    WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven to be ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Anaerobic Digestion Product line

  • Premium

    Intereco - Model CONE - Conic Sludge Mixer

    Special conic mixer CONE useful to realise a good and continuous mixing between sludge and polyelectrolite solution. It is made with a conic part in which sludge is fed through a DN 100 PN 10 pipe, with a 90 degrees elbow and delivered through a DN 80 PN 10 flange. After the elbow and before the case, the flocculant is fed through four symmetric ...

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • Sodimate - Model MBV - Sludge Mixer

    Sodimate’s MBV sludge mixer is designed for the mixing of sludge and lime to achieve Class A or Class B stabilized sludge. The dual-shaft compact mixer can easily be adapted to existing or new sludge stabilization processes for water and wastewater treatment plants.

    By Sodimate based in Sartrouville, FRANCE. from Sludge Liming Product line

  • Hydraulic Sludge Mixers

    The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles ...

    By Mixing Systems, Inc. based in Dayton, OHIO (USA). from Hydraulic Sludge Mixers Product line

  • Lime/Sludge Mixer

    Using the MOOS lime stabilization unit results in a very efficiently sanitized end product, which has a markedly improved consistency. Lime stabilized sludge can be re-used to improve soil quality and is a valuable fertilizer.

    By Simon Moos Maskinfabrik A/S based in Sønderborg, DENMARK.

  • Hi-Pass - Static Sludge Mixer

    The KOMAX Hi-Pass Sludge Mixer is designed to effectively mix polymer solution into sludge flows prior to dewatering process. Polymer savings in excess of 25% can be achieved. Features of this unit include:

    By Komax Systems, Inc. based in Huntington Beach, CALIFORNIA (USA). from Other Products Product line

  • Premium

    ENTA - Mixer

    Mixing of the coagulant and chemicals with water is performed by ENTA mixer and flocculators. All impellent groups, motor, reducer and general project have a long life and strong structure. Mixer and flocculators shall be produced as coated (rubber, teflon, rilsan etc.) carbon steel or painted carbon steel, galvanized coated carbon steel or ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Sludge Dewatering Systems Product line

  • Premium

    Intereco - Model GRA - Paddle Double Mixer

    This very low running cost and no polluting system uses a double screw mixer “GRA”, in which the cake coming from the belt press is mixed with quick lime (CaO).

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • Premium

    AIRE-O2 Triton TR Series - Pulp and Paper Aerator Mixer

    Pulp and paper mills produce large volumes of wastewater and residual solids, presenting a number of issues in relation to wastewater treatment, discharge, and sludge disposal.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA). from Surface Aeration Solutions Product line

  • Premium

    Intereco - Model CRV Series - Vertical Cylindrical Reactor for the Best Sludge Flocculation

    Vertical cylindrical reactor CRV necessary to have the best flocculation, composed by a cylindrical hot dip zinc coated tank, is necessary for the sludge and poly mixing, made by a low speed mixer (18 rpm), to obtain the best sludge flocculation. The long contact time between sludge and poly before the sludge discharging, optimize the flocculant ...

    By Intereco S.n.c. based in Candiolo (TO), ITALY. from Sludge Treatment Plant Product line

  • Model CMD - Horizontal Submersible Mixers

    Horizontal submersible mixers with direct drive. For applications in nitrification/de-nitrification, sludge treatment and storage, disinfection tanks and industrial mixing. Available with cast-iron construction and stainless steel propeller or in a completely stainless steel version - AISI 316. Galvanic separation system for standard components ...

    By Caprari S.p.A. based in Modena, ITALY. from Mixers Product line

  • Paddle Mixers/Pug Mixers

    Claro paddle mixers / pug mill agitators are an effective severe-duty mixer for lime-stabilized sludge applications in wastewater treatment plants and for the mixing and agglomeration of a wide variety of other industrial, agricultural, and hygienic food materials. Mixing intensity, retention time, and product appearance is controlled by changing ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Solids/Sludge Handling Product line

  • OPEC - Model SRJ - Submerged Rotary Jet Mixer

    The SRJ submerged rotary jet mixer directs powerful jets of oil that sweep through the sludge on the floor of the oil storage tank and blends the soluble hydrocarbons into the total contents.

    By Oil Pollution Environmental Control Ltd based in Birstall, Batley, UNITED KINGDOM. from Oil Pollution Sludge Control Product line

  • Mixer

    With 2stage agitator attached to the bottom, sedimentation is prevented in sludge basin. Stable operation where it runs in a low speed ot S^-IS rpm and with a minimum power consumption.Support ot the bottom ot the agitator prevents it trom shaking and lengthens the lifespan.

    By Cheonbo Engineering Co.. Ltd. based in Hwasung-City, SOUTH KOREA.

  • MIXIT - Model MIXIT-G 7,5 - Mixers

    Waterix MIXIT-G model mixers are suitable for mixing of wastewater and industrial process water. G-model mixers are equipped with durable gear. Other suitable uses for MIXIT-G mixers, for example, are sludge or high solids content of the liquid mixture. Waterix MIXIT-G mixers are equipped with downward flow pipe which allows efficient mixing to ...

    By W-Rix Ltd based in Parainen, FINLAND. from MIXIT- Water Mixers Product line

  • HYPERPITCH - Mixer

    The INVENT HYPERPITCH®- Mixer add-on takes care about the reliable reduction of scum and floating sludge in anaerobic and anoxic basins.The HYPERPITCH®- Mixer add-on can easily be installed on the shaft of an existing INVENT HYPERCLASSIC®- Mixer.How can we support you with the planning, optimization, modernization of your plant, or ...

    By INVENT Umwelt-und Verfahrenstechnik AG based in Erlangen, GERMANY. from Mixing Technology Product line

  • Mixers

    Mixers can be classified under three groups: Mixers of propeller, turbine, flocculator, etc. types, utilised to prepare solutions of a given volume and consisting of motor, impeller and shaft; Static mixers that agitate and mix different liquids by changing the flowrate; and Double -shaft spiral mixers used mostly in sludge dewatering plants, for ...

    By SISMAT ULUSLARARASI LTD. STI. based in KOCAELI, TURKEY. from General Treatment Equipment Product line

  • Submersible Stainless Steel Mixer (300 RPM) POPR-I

    Submersible agitator for waste water treatment plants and industry (stainless steel). Six motor sizes from 3.0 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

    By Landia based in Lem, DENMARK. from Mixers - Submersible Mixers Product line

  • Model POD-I - Submersible Mixer - 1500 RPM

    Submersible mixer for waste water treatment plants and industry. Nine motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 3,800 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

    By Landia based in Lem, DENMARK. from Mixers - Submersible Mixers Product line

  • Submersible Stainless Steel Mixer (750 RPM) PODR-I

    Submersible agitator for waste water treatment plants and industry (all in stainless steel). Four motor sizes from 1.1 to 4.0 kW. Capacity up to approx. 1,525 m³/hour. 750 propeller revolutions/minute. Axial thrust from 400 N to 2150 N.

    By Landia based in Lem, DENMARK. from Mixers - Submersible Mixers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you