sludge mixer Equipment in Asia & Middle East

22 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Industrial Mixing ×

  • Keyword: sludge mixer ×

  • In: Asia & Middle East ×

ExtremeDuty™ Sludge Mixer

by WesTech Engineering, Inc.     Office in Shangahi, CHINA

WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven to be ...

AIRE-O2 Triton - Process Aerator/Mixer for Pulp And Paper

by Aeration Industries International (AII)     Distributor in INDIA

Pulp and paper mills produce large volumes of wastewater and residual solids, presenting a number of issues in relation to wastewater treatment, discharge, and sludge disposal.

Mixer

by Cheonbo Engineering Co.. Ltd.     based in Hwasung-City, SOUTH KOREA

With 2stage agitator attached to the bottom, sedimentation is prevented in sludge basin. Stable operation where it runs in a low speed ot S^-IS rpm and with a minimum power consumption.Support ot the bottom ot the agitator prevents it trom shaking and lengthens the lifespan.

TURBOSTAR - Model TS - Mixer

by Fuchs Enprotec GmbH     Distributor in Navi Mumbai-, INDIA

The directly driven FUCHS submersible TURBOSL4R Mixer TS-SUB is applied in storm water tanks, where it swirls up settled solids. In equalization basins, activated sludge basins and small sludge storage tanks it provides for proper mixing and circulation. The high-performance machine is simply designed and very sturdy. The special design of the ...

Mixers

by Arsimak Aritma Sistemleri     Office in IRAQ

Mixers can be classified under three groups: Mixers of propeller, turbine, flocculator, etc. types, utilised to prepare solutions of a given volume and consisting of motor, impeller and shaft; Static mixers that agitate and mix different liquids by changing the flowrate; and Double -shaft spiral mixers used mostly in sludge dewatering plants, for ...

HYPERPITCH - Mixer

by INVENT Umwelt-und Verfahrenstechnik AG     Office in SAIF Zone, UNITED ARAB EMIRATES

The INVENT HYPERPITCH®- Mixer add-on takes care about the reliable reduction of scum and floating sludge in anaerobic and anoxic basins.The HYPERPITCH®- Mixer add-on can easily be installed on the shaft of an existing INVENT HYPERCLASSIC®- Mixer.How can we support you with the planning, optimization, modernization of your plant, or ...

Submersible Stainless Steel Mixer (150 RPM) POPR-I

by Landia     Office in Shanghai, CHINA

Submersible agitator for waste water treatment plants and industry (stainless steel). Five motor sizes from 1.1 to 7.5 kW. Capacity up to approx. 3,850 m³/hour. 150 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Dry-Installed Mixer (300 RPM) PowerMix POPTR-I

by Landia     Office in Shanghai, CHINA

Dry-installed mixer for waste water treatment plants, biogas plants and various industries. Can be installed in steel and concrete tanks. Five motor sizes from 5.5 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 1400 N to 5000 N.

Model POP-I - Submersible Mixer - 300 RPM

by Landia     Office in Shanghai, CHINA

Submersible agitator for waste water treatment plants and industry. 10 motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Submersible Stainless Steel Mixer (300 RPM) POPR-I

by Landia     Office in Shanghai, CHINA

Submersible agitator for waste water treatment plants and industry (stainless steel). Six motor sizes from 3.0 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Submersible Stainless Steel Mixer (750 RPM) PODR-I

by Landia     Office in Shanghai, CHINA

Submersible agitator for waste water treatment plants and industry (all in stainless steel). Four motor sizes from 1.1 to 4.0 kW. Capacity up to approx. 1,525 m³/hour. 750 propeller revolutions/minute. Axial thrust from 400 N to 2150 N.

Model POD-I - Submersible Mixer - 1500 RPM

by Landia     Office in Shanghai, CHINA

Submersible mixer for waste water treatment plants and industry. Nine motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 3,800 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

Model POD-I - Submersible Mixer - 750 RPM

by Landia     Office in Shanghai, CHINA

Submersible agitator for waste water treatment plants and industry. Nine motor sizes from 0.55 to 7.5 kW. Capacity up to approx. 2,050 m³/hour. 750 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

Submersible Stainless Steel Mixer (1500 RPM) PODR-I

by Landia     Office in Shanghai, CHINA

Submersible agitator for waste water treatment plants and industry (stainless steel). Four motor sizes from 3.0 to 11.0 kW. Capacity up to approx. 2,250 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 400 N to 2150 N.

TURBOSTAR - Submersible Mixer

by Fuchs Enprotec GmbH     Distributor in Navi Mumbai-, INDIA

The directly driven FUCHS submersible TURBOSL4R Mixer TS-SUB is applied in storm water tanks, where it swirls up settled solids. In equalization basins, activated sludge basins and small sludge storage tanks it provides for proper mixing and circulation. The high-performance machine is simply designed and very sturdy. The special design of the ...

Flocsensor - Inline-Mixer

by J.F. Knauer GmbH     Office in Bungdang-Gu, Seongnam-Si,, SOUTH KOREA

During the mixing of flocculation agent into sludge one process has turned out to be significant:the optimal input of mixing energy.This is reached by bringing in the polymer solution into the sludge with a hollow shaft mixer, also called INLINE-Mixer (German patent 197 19 637 C1, US patent 5,993,670).The INLINE-Mixer is rotary speed controlled ...

DeTech - Model QJB Series - Submersible Mixer

by DeTech Pumps Co. Ltd.     based in Nanjing, CHINA

QJB Submersible mixer is designed to applicate widely in waste water treatment, especially for mixing, sludge digestive, tank, suspend solids decrease, circulation etc. It can operate smoothly in the conditions as following:

Argos® - Model SBR - Sequencing Batch Reactor

by Aeration Industries International (AII)     Distributor in INDIA

The Argos® Sequencing Batch Reactor (SBR) offers greater process flexibility of the activated sludge treatment process. Utilizing a uniquely engineered gear driven decanter and the dual function Aire-O2® Triton TR Series process aerator/mixer, the Argos SBR is an ideal system for municipal and industrial wastewater treatment facilities looking for ...

Hyperjet - Self-Suction Aerator and Mixer

by Biogest International GmbH     Office in Shanghai, CHINA

Ideal mixing and aeration system for small-sized wastewater treatment plants.No additional air blower required - self suction of airCompletely made of stainless steel (AISI 304 or better). No danger of blockage or plaiting of fibre-solids. Gear-drive requires a minimum of maintenance (only one oil-change every two years). Low speed for ...

Flocmaster - Profidos

by J.F. Knauer GmbH     Office in Bungdang-Gu, Seongnam-Si,, SOUTH KOREA

Charging processor for membrane and chamber filter presses. Control of two feeding pumps with pressure and sludge data logging, one dosing pump, one Inline-Mixer for the input of mixing energy.

Related Terms for sludge mixer

Need help finding the right suppliers?

Let the XPRTs do the work for you