sludge mixer Equipment in United Kingdom

16 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Industrial Mixing ×

  • Keyword: sludge mixer ×

  • In: Europe ×

  • In: United Kingdom ×

Lime/Sludge Mixer

by Simon Moos Maskinfabrik A/S     Office in York North Yorkshire, UNITED KINGDOM

Using the MOOS lime stabilization unit results in a very efficiently sanitized end product, which has a markedly improved consistency. Lime stabilized sludge can be re-used to improve soil quality and is a valuable fertilizer.

Model CMD - Horizontal Submersible Mixers

by Caprari S.p.A.     Office in UNITED KINGDOM

Horizontal submersible mixers with direct drive. For applications in nitrification/de-nitrification, sludge treatment and storage, disinfection tanks and industrial mixing. Available with cast-iron construction and stainless steel propeller or in a completely stainless steel version - AISI 316. Galvanic separation system for standard components ...

OPEC - Model SRJ - Submerged Rotary Jet Mixer

by Oil Pollution Environmental Control Ltd     based in Birstall, Batley, UNITED KINGDOM

The SRJ submerged rotary jet mixer directs powerful jets of oil that sweep through the sludge on the floor of the oil storage tank and blends the soluble hydrocarbons into the total contents.

Submersible Stainless Steel Mixer (150 RPM) POPR-I

by Landia     Office in Whitchurch, UNITED KINGDOM

Submersible agitator for waste water treatment plants and industry (stainless steel). Five motor sizes from 1.1 to 7.5 kW. Capacity up to approx. 3,850 m³/hour. 150 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Dry-Installed Mixer (300 RPM) PowerMix POPTR-I

by Landia     Office in Whitchurch, UNITED KINGDOM

Dry-installed mixer for waste water treatment plants, biogas plants and various industries. Can be installed in steel and concrete tanks. Five motor sizes from 5.5 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 1400 N to 5000 N.

Model POP-I - Submersible Mixer - 300 RPM

by Landia     Office in Whitchurch, UNITED KINGDOM

Submersible agitator for waste water treatment plants and industry. 10 motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Model POD-I - Submersible Mixer - 750 RPM

by Landia     Office in Whitchurch, UNITED KINGDOM

Submersible agitator for waste water treatment plants and industry. Nine motor sizes from 0.55 to 7.5 kW. Capacity up to approx. 2,050 m³/hour. 750 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

Submersible Stainless Steel Mixer (1500 RPM) PODR-I

by Landia     Office in Whitchurch, UNITED KINGDOM

Submersible agitator for waste water treatment plants and industry (stainless steel). Four motor sizes from 3.0 to 11.0 kW. Capacity up to approx. 2,250 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 400 N to 2150 N.

Submersible Stainless Steel Mixer (300 RPM) POPR-I

by Landia     Office in Whitchurch, UNITED KINGDOM

Submersible agitator for waste water treatment plants and industry (stainless steel). Six motor sizes from 3.0 to 18.5 kW. Capacity up to approx. 6,650 m³/hour. 300 propeller revolutions/minute. Axial thrust from 300 N to 5000 N.

Submersible Stainless Steel Mixer (750 RPM) PODR-I

by Landia     Office in Whitchurch, UNITED KINGDOM

Submersible agitator for waste water treatment plants and industry (all in stainless steel). Four motor sizes from 1.1 to 4.0 kW. Capacity up to approx. 1,525 m³/hour. 750 propeller revolutions/minute. Axial thrust from 400 N to 2150 N.

Model POD-I - Submersible Mixer - 1500 RPM

by Landia     Office in Whitchurch, UNITED KINGDOM

Submersible mixer for waste water treatment plants and industry. Nine motor sizes from 1.1 to 18.5 kW. Capacity up to approx. 3,800 m³/hour. 1500 propeller revolutions/minute. Axial thrust from 430 N to 2150 N.

Statiflo - Statiflo Non-Ragging Pipe Mixer (NR)

by Statiflo International Ltd.     based in Macclesfield, UNITED KINGDOM

The Statiflo NR Mixer has been specifically designed for sludge mixing or wastewater applications with high fibre content.In full-scale trials with a major UK water utility the Statiflo NR Mixer outperformed all competitor's designs including a static mixer, an orifice plate and sludge valves.These pictures and graphs illustrate the superior ...

Transvac - Tank Jet Mixers

by WWT Magazine     based in East Grinstead, UNITED KINGDOM

Transvac Tank Jet Mixers are a mass momentum exchange device which uses the energy of pressurised liquid to entrain, mix and pump a secondary liquid. The principle is used for many process applications including blending, solids suspension, dilution and heat distribution.

Clayton - Modular Mix Sludge Mixing Unit

by Clayton iwt Ltd     based in Penistone, UNITED KINGDOM

Having been involved with every stage of sludge tank air mixing systems for over eight years, we are pleased to offer our new generation of factory assembled mixer units called the “Modular Mix”. The innovated design cuts down on site time whilst ensuring each unit is fully tested before delivery to site. The “Modular Mix” ...

Mixing System For Anaerobic Digesters GasMix

by Landia     Office in Whitchurch, UNITED KINGDOM

The GasMix system from Landia was developed specifically for biogas plants where the unique GasMix solution ensures a stable and high production of biogas – WITHOUT the high-maintenance big-bladed propellers which are characteristic of traditional biogas systems with mechanical mixers.

HyperClassic - Mixing Systems

by Corgin Ltd     based in Stratford, UNITED KINGDOM

The HyperClassic Mixer was developed in 1985 in the Fluid Mechanics Department at the Friedrich-Alexander University, Erlangen-Nuremburg, to support a thesis on the most energy-efficient mixing system design. Rather than just upgrading traditional mixer designs, the team started from scratch – drawing on a wealth of new technology and ...

Related Terms for sludge mixer

Need help finding the right suppliers?

Let the XPRTs do the work for you