sludge mixing Equipment available in Namibia

Available in Namibia| Near Namibia
102 Results found

We couldn't find any sludge mixing equipment in Namibia

Here is a list of results available in Namibia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Industrial Mixing ×

  • Keyword: sludge mixing ×

  • Available in: Africa ×

  • Available in: Namibia ×

Steel Plant Waste Residues Recovery

by econ industries GmbH     based in Starnberg, GERMANY

Process and design: The increasing demand to reuse residues from steel plants leads to sophisticated solidification and granulation processes as well as the production of highly viscous suspensions. Materials from very different origins need to be homogenised by turbulent mixing processes to ensure the required consistency for the approptiate ...

Secondary Fuel Production

by econ industries GmbH     based in Starnberg, GERMANY

Applications and design Process: Fuel preparation for cement kilns and power plants. Source: Mixed hazardous wastes from various origins with caloric value. Hydrocarbon and solvent based sludge, food industry waste. Full/empty metal drums and plastic containers. Polluted wood/pallets, e.g. with painted surface Plastic packing waste and textiles, ...

Solidification / Immobilisation for Industrial Waste Cleaning

by econ industries GmbH     based in Starnberg, GERMANY

Applications and design: Process: Stabilisation of residues by turbulent mixing. Continuous or batch-wise. Source: Filter dust from industrial processes, e.g. metal industry. Fly ashes from waste incineration and power plants. Slag from metallurgical processing or waste incineration. Soils and other minerals, e.g. contaminated with heavy metals. ...

Intereco - Model CONE - Conic Mixer Part

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Special conic mixer CONE useful to realise a good and continuous mixing between sludge and polyelectrolite solution. It is made with a conic part in which sludge is fed through a DN 100 PN 10 pipe, with a 90 degrees elbow and delivered through a DN 80 PN 10 flange. After the elbow and before the case, the flocculant is fed through four symmetric ...

Mixer

by ENTA Treatment Systems Engineering Contracting LTD     based in Istanbul, TURKEY

Mixing of the coagulant and chemicals with water is performed by ENTA mixer and flocculators. All impellent groups, motor, reducer and general project have a long life and strong structure. Mixer and flocculators shall be produced as coated (rubber, teflon, rilsan etc.) carbon steel or painted carbon steel, galvanized coated carbon steel or ...

ExtremeDuty™ Sludge Mixer

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

WesTech ExtremeDuty™ Sludge Mixers provide vigorous mixing of digester contents to prevent stratification and improve the anaerobic process. They reliably speed gas production while reducing foaming and scum accumulation. This rugged design was originally developed to reduce the high service costs of egg-shaped digester mixers. It has proven to be ...

Intereco - Model Rotoset Series - Dynamic Thickeners

by Intereco S.n.c.     based in Candiolo (TO), ITALY

The unit is complete with vertical cylindrical reactor with impeller for a perfect sludge/polyelectrolite mixing, with a centrifugal filter cloth washing water pump, able to recycle the thickener filtrate, this to avoid water consumption and the increasing of the WWTP hydraulic head. The drum is driven by a motor gear reducer to control rotation ...

Intereco - Model CRV Series - Vertical Cylindrical Reactor

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Vertical cylindrical reactor CRV necessary to have the best flocculation, composed by a cylindrical hot dip zinc coated tank, is necessary for the sludge and poly mixing, made by a low speed mixer (18 rpm), to obtain the best sludge flocculation. The long contact time between sludge and poly before the sludge discharging, optimize the flocculant ...

Intereco - Granulator

by Intereco S.n.c.     based in Candiolo (TO), ITALY

Manufactured in carbon steel, either painted of hot dip zinc coated. Available under request completely in aisi 304 s.s. Model gra 150 available with hopper for quick lime, completed by a dosing screw with mecanical speed variator and vibration device against bridges.

Model PRO-MIX - Submersible Mixer

by Pro-Equipment, Inc.     based in Waukesha, WISCONSIN (USA)

PRO-MIX submersible mixers are used for mixing of various liquids including sludge homogenization and suspension of bottom sediments. They prevent sediments and/or floating layers and create flow velocity to transport liquids.

HYPERPITCH - Mixer

by INVENT Umwelt-und Verfahrenstechnik AG     based in Erlangen, GERMANY

The INVENT HYPERPITCH®- Mixer add-on takes care about the reliable reduction of scum and floating sludge in anaerobic and anoxic basins.The HYPERPITCH®- Mixer add-on can easily be installed on the shaft of an existing INVENT HYPERCLASSIC®- Mixer.How can we support you with the planning, optimization, modernization of your plant, or ...

Vertical Mixers for Industrial Mixing - Helix Mixer

by AVA - Huep GmbH u. Co. KG     based in Herrsching, GERMANY

The AVA conical mixers and dryers with their characteristic single or double helix were developed at the end of the 90s in order to find a solution to a problem that continually occurs with traditional conical devices with rotary screws. On the one hand is a risk of product contamination by means of transmission parts in the product chamber, and ...

ANAMIX - Model T - Sludge Digestors

by Global Water Engineering (GWE)     based in Bangkok, THAILAND

Completely mixed “once-through” digestor operated in the thermophilic range, used for mixed organic residues (a.o. slaughterhouse waste).

ANAMIX - Model M - Sludge Digestors

by Global Water Engineering (GWE)     based in Bangkok, THAILAND

Completely mixed “once-through” mesophilic digestor, used for very high strength, very high TSS containing effluents.

Paddle Mixers/Pug Mixers

by Claro Inc     based in Montreal, QUEBEC (CANADA)

Claro paddle mixers / pug mill agitators are an effective severe-duty mixer for lime-stabilized sludge applications in wastewater treatment plants and for the mixing and agglomeration of a wide variety of other industrial, agricultural, and hygienic food materials. Mixing intensity, retention time, and product appearance is controlled by changing ...

Coarse Bubble Aeration & Mixing Systems

by Tideflex Technologies - a Division of Red Valve Company, Inc.     based in Carnegie, PENNSYLVANIA (USA)

A Maintenance Free System for the Most Difficult Process Fluids. Tideflex Technology’s Coarse Bubble Aeration Systems provide the operators with extreme flexibility in operational methods for their process systems. Now the process requirements of the system can drive the operational methods not the limitations of the equipment within the ...

BIOMIXER - Aeration & Mixing System

by Smith & Loveless Inc.     based in Lenexa, KANSAS (USA)

BIOMIXER Aeration & Mixing System by S&L is a patented, award-winning system that integrates the efficiency of fine bubbles diffusion with tremendous mixing capability in a single pre-engineered apparatus.

Hydraulic Sludge Mixers

by Mixing Systems, Inc.     based in Dayton, OHIO (USA)

The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles directing flow to keep sludge in suspension.The hydraulic sludge mixer is a series of jet nozzles ...

Hyperjet - Self-Suction Aerator and Mixer

by Biogest International GmbH     based in Dresden, GERMANY

Ideal mixing and aeration system for small-sized wastewater treatment plants.No additional air blower required - self suction of airCompletely made of stainless steel (AISI 304 or better). No danger of blockage or plaiting of fibre-solids. Gear-drive requires a minimum of maintenance (only one oil-change every two years). Low speed for ...

Model MAD Series - Coarse Bubble Diffuser

by GloTech Corporation     based in Coconut Creek, FLORIDA (USA)

GloTech is your best choice for coarse bubble diffusers. We offer guaranteed competitive pricing, superior quality, and timely delivery on our MAD series diffusers. Private labeling and special OEM pricing are also available for select customers. GloTech MAD series stainless steel wide-band coarse bubble diffusers are a time-proven product for the ...

Need help finding the right suppliers?

Let the XPRTs do the work for you