static mixer Equipment available in San Marino

Available in San Marino| Near San Marino
78 Results found

We couldn't find any static mixer equipment in San Marino

Here is a list of results available in San Marino

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Industrial Mixing ×

  • Keyword: static mixer ×

  • Available in: Europe ×

  • Available in: San Marino ×

Kenics - Model WVM - Static Mixers

by National Oilwell Varco     based in Dayton, OHIO (USA)

The WVM mixers consist of a simple wall additive injection point, a pre-distribution tab immediately downstream of the injection point and banks of trapezoidal shaped mixing elements. The number of banks of mixing elements varies depending on the mixture quality required for the process. The dimensions, angle of attack and spacing of the ...

Kenics - Model HEV - Static Mixers

by National Oilwell Varco     based in Dayton, OHIO (USA)

The patented tab geometry of the Kenics® HEV Static Mixer maximizes the conversion of turbulent energy into efficient mixing for a variety of line shapes and sizes. The mixing elements take advantage of the naturally occurring vortices induced by the element edges to produce complete stream uniformity.

Kenics - Model KM - Static Mixers

by National Oilwell Varco     based in Dayton, OHIO (USA)

In all Kenics® KM Series Static Mixers, a patented helical mixing element directs the flow of material radially toward the pipe walls and back to the center. Additional velocity reversal and flow division results from combining alternating right- and left-hand elements, thus increasing mixing efficiency. All material is continuously and ...

Kenics - Model UltraTab - Static Mixer

by National Oilwell Varco     based in Dayton, OHIO (USA)

Designed for turbulent flow applications common in water treatment, desalination plants, and chemical processing, the UltraTab delivers a high degree of mixing in a compact space. UltraTab mixers provide rapid mixing in short distances common in water treatment, desalinization plants, and chemical processing applications. A low pressure drop ...

Kenics - KMX-V Static Mixers

by National Oilwell Varco     based in Dayton, OHIO (USA)

For demanding mixing applications, such as those involving fluids with widely disparate viscosities or volume ratios, the common limiting factor in static mixer design is the allowable mixer length. The KMX was patented in 2002 and enhanced in 2012 to handle difficult laminar flow mixing applications. Specifically the mixer is intended for extreme ...

Statiflo - Model S Type - Static Mixers

by Statiflo International Ltd.     based in Macclesfield, UNITED KINGDOM

A range of standard design static mixers, pre-manufactured with flanged ends and one injection nozzle. Three or four elements are supplied depending on flow regime. Available in uPVC and stainless steel.

Sulzer - Model Type SMV™ - Static Mixer

by Sulzer     based in Winterthur, SWITZERLAND

The Sulzer SMV static mixer is ideal for applications that require a distributive and homogeneous mixing and blending action in the turbulent flow regime.

Statiflo - Model Series 300 - Static Mixer

by Statiflo International Ltd.     based in Macclesfield, UNITED KINGDOM

Mixers with solid 100% PTFE removable elements and PFTE lined carbon steel housing for corrosive duties in all industries. Also available with optional separate PTFE/PFA injectors, heating and cooling jackets.

Sulzer - Model Type SMX™ and SMX™ plus - Static Mixer

by Sulzer     based in Winterthur, SWITZERLAND

The SMX plus static mixer is the reference for homogenization and dispersing tasks in laminar flow. Even challenging mixing applications such as dosing a small amount of low- viscous additive into a high-viscous main stream can be performed very efficiently.

Veenstra - Static Mixers

by Veenstra Group     based in Coevorden, NETHERLANDS

Suitable for open or closed tanks; Operate by hand or air-cylinder; Material wetted pats ss 304/316(L); Electromotor, variator, motorreductor or airmotor.

HECISA - Static Mixers

by Hispano Europea de Comercio e Industria SA (HECISA)     based in Getafe, SPAIN

A very wide range of equipments designed for in line mixing of different liquids, liquids with gases or different gases. Nominal diameters fro '/»' (ND 15 mm) and pressures up to 500 bar, manufacture under different design codes, ASME, ANSI B 31.3, DIN, SMS, ISO and more. The construction materials can be: carbon steel, austenitic stainless ...

Static Mixers

by CTech Europe Ltd.     based in Neston, UNITED KINGDOM

Static mixers and Heat Exchangers are used for a wide range of applications including mixing, heat exchange and dispersion, due to numerous unique innovations our products are especially suitable for hygienic processes where CIP (cleaning in place) is required, and also a broad range of temperatures and viscosities.

STAMIX - Static Mixer

by Sunkaier, LLC     based in Wilmington, DELAWARE (USA)

Static mixer is an efficient mixing equipment with no moving parts. In addition to the oil refining, chemical industry is widely used  in medicine, food, metallurgy, plastics extrusion and environmental protection industries.

Static Mixers

by Fuel Tech, Inc.     based in Warrenville, ILLINOIS (USA)

Static mixers are used in a wide variety of applications, including air pollution control, material processing and wastewater handling systems where deviations in process or product conditions need to be minimized. Fuel Tech is rapidly becoming a leader in the design and supply of mixing technology for the power generation industry, particularly ...

Westfall - Model 2800 - Static Mixers

by Westfall Manufacturing Co.     based in Bristol, RHODE ISLAND (USA)

The Westfall Model 2800 Static Mixer is a full pipe motionless static mixer in which fluids are injected and rapidly mixed by a combination of alternate vortex shedding and intense shear zone turbulence. Try the Cavitation Calculator downloadable Excel spreadsheet for the 2800 and 3050 mixers. Try the 2800 Mixer and 3050 Mixer Headloss Calculator ...

Static Mixers

by Euromixers Limited     based in Stockport, UNITED KINGDOM

Static mixers are used for a wide range of applications including mixing, heat exchange and dispersion, due to numerous unique innovations our products are especially suitable for hygienic processes where CIP (cleaning in place) is required, and also a broad range of temperatures and viscosities. Static mixers and Heat Exchangers can be designed ...

StaMixco - Plastic Disposable Static Mixers

by Stamixco Ltd.     based in Winterthur, SWITZERLAND

StaMixCo manufactures a wide variety of plastic disposable static mixers for 2-component (2K) meter-mix-dispense applications. The available product range is under constant development. So please do not hesitate to contact us directly for specific requests.

Model 900 - Statiflo Static Mixers

by Entec International B.V     based in POORTUGAAL, NETHERLANDS

Type 900 for perfect mixing at an extremely low pressure drop and very short installation lengths. Ideal for adding chemical agents as a fundamental part of the total process operation. Over-addition due to poor blending is prevented by a static mixer. There is also a saving in the consumption of chemical agents.

StaMixco - Model Type GXR - Double-Roof Disk Static Mixer

by Stamixco Ltd.     based in Winterthur, SWITZERLAND

The GXR Static Mixer (Licensee of Bayer, AG) is used for mixing, dispersing and homogenization of viscous materials. It is a high performance motionless mixer design that creates a very high degree of mixing in a short length. It is capable of mixing materials with very large differences in viscosity and volumetric ratios.

StaMixco - Extrusion Melt Blender Static Mixer

by Stamixco Ltd.     based in Winterthur, SWITZERLAND

StaMixCo manufacturers all three commercially proven static mixer designs used for high viscous melt flow mixing of polymers in extrusion service. As with most process equipment, each static mixer design has specific advantages and disadvantages that make it more or less suitable for a specific application and installation.

Need help finding the right suppliers?

Let the XPRTs do the work for you