Only show results available in Virginia? Ok

Industrial Wastewater Applications

  • Cavity pump for water and wastewater industry

    For more than 75 years, Moyno progressing cavity pumps have been successfully applied and widely used in the industrial and municipal wastewater treatment industry. Over the years Moyno has continually enhanced the design and operational performance of its products to innovate wastewater treatment solutions. Moyno provides an effective combination of products, process solutions and service support programs to keep plant operations running smoothly and efficiently with little downtime and minimal maintenance. Moyno also provides a broad offering and custom product design capabilities for critical application requirements.

    By Moyno, Inc. based in Springfield, OHIO (USA).

  • Industrial Meshes for Distillation

    In the demanding applications in distillation technology, i.e. the separation of high-molecular compounds, SolidWEAVE metal meshes are applied in structured mesh packs. Wire mesh packs with GKD filter meshes make delicate separation processes possible with low temperatures and short residence time – keyfactors for distillation process reliability.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Reduced Sulfur Compound Treatment for Refinery Wastewater

    Sulfur compounds, such as hydrogen sulfide, thiosulfates and mercaptans, can present serious refinery wastewater problems. Hydrogen peroxide treatment is a cost effective way to treat these reduced sulfur species.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Industrial water Uranium recovery & purification

    The type of Uranium mineralization and the nature of its association within a particular deposit will have a major impact on process route selection. Uranium minerals are classified according to their influence on extractive metallurgy. The presence of impurities such as Vanadium, Molybdenum, and others may dictate that ion exchange is to be employed.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Biological wastewater processes for mining

    The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is acceptable for re-use, reducing the stress on ecosystems in water stressed areas.

    By Biowater Technology based in Cumberland, RHODE ISLAND (USA).

  • Industrial wastewater treatment for industries

    MIOX is the lowest cost supplier of chlorine for disinfection and oxidation of wastewater prior to discharge. Mixed Oxidant Solution (MOS) chemistry is more effective at biofilm control, Biochemical and Chemical oxygen demand removal (BOD/COD), breakpoint chlorination of ammonia and hydrogen sulfide (H2S) removal.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Microbial formulations for industrial sector

    MICROCAT microbial formulations from Bioscience, Inc., are blends of specialized, naturally occurring microbes and other ingredients that work together to solve the problems associated with wastewater treatment from heavy process industries. By augmenting existing microbial populations, MICROCAT products naturally enhance the biodegradation of wastewater from refineries, pulp mills, chemical plants, steel mills and textile plants. When properly applied as recommended by Bioscience’s team of seasoned professionals, MICROCAT bioaugmentation formulas can result in more stable and efficient wastewater treatment plant operation and better overall effluent quality for their difficult-to-treat wastewaters.

    By Bioscience, Inc. based in Allentown, PENNSYLVANIA (USA).

  • Wastewater treatment solution for the industrial industries

    Schwing Bioset, Inc.`s technical expertise and innovative approach to the design of Fluidized Bed dryers, coolers, and conditioners has resulted in Schwing Bioset fast becoming a preferred partner of companies processing municipal solids and companies processing coal. The versatility of Schwing Bioset`s piston pumps allow them to be used in many industries to pump a wide range of materials such as oil sludges, dredging spoils, food wastes, and coal slurries. In fact, Schwing Bioset pumps are so versatile they can pump just about anything that can be fed into them.

    By Schwing Bioset, Inc. based in Somerset, WISCONSIN (USA).

  • Automated solutions for the industrial lagoon / pond dredging

    Liquid Waste Technology’s dredging systems are widely used for industrial lagoon dredging applications. Electric driven or diesel engine driven dredges are used for removing mine tailings, dredging chemical processing waste ponds, and slag recovery. Automation can be added to make dredging industrial lagoons more efficient and productive.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Premium

    Chemical filtration in water for the wastewater industry

    In the field of waste water treatment atech membranes are used, for example, for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Wastewater treatment upgrades & extensions

    The time comes that a Sewage Treatment Facility Municipal or Industrial may require significant upgrading or even an extension. The upgrade usually concerns improvement process performance (removal rates) and efficiency as well as replacement of mechanical equipment. The plant expansion usually refers to an increase of the capacity or to the extension of treatment ability, ie adding Nutrient Removal.

    By DEVISE ENGINEERING S.A. based in Athens, GREECE.

  • Premium

    Industrial wastewater treatment plant design

    Environmental engineering’s agency Colsen b.v. designs, specifies and executes building site direction of several kinds of wastewater treatment installations for industrial- and communal wastewater. These installations are designed to deal with the local climatological conditions and specific customer demands.

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Premium

    Water reuse for the food industry

    Especially in the food industry large volumes of water are consumed. This process water is often discharged directly or discharged after passing a wastewater treatment station. Due to the increasing costs of (process)water companies try to reduce the water consumption mainly through reuse. An important aspect of this development is to comply with the high water quality standards.

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Premium

    Water treatment for the pharmaceutical industry

    The pharmaceutical market is at the center of personal care, serving to protect public health and improve the quality and span of life. This global market requires treatment technologies to disinfect, measure, control and filter process water and wastewater generated from production.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Marine envrionmental solutions for vessels, leisure complexes, beaches, swimming pools industry

    Fugro EMU Limited has a long established history working with the leisure industry providing first class sampling, analysis and consultancy services for a range of private and government organisations. Working on vessels, leisure complexes, beaches, swimming pools and dive sites all carried out by our in-house teams.

    By Fugro EMU Limited based in Portsmouth, UNITED KINGDOM.

  • Premium

    Solutions for the chemical industry

    Many organizations in the industrial sector are investigating possibilities to improve their (sustainable) energy profile. The renewable energy sector currently offers a broad scale of options with significant capacity for growth and new projects and expanding upon existing infrastructures. In the industrial sector, biogas can replace the current natural gas consumption. DMT has extensive experience within various industries and knows her way around. For more than 28 years we have been advising our customers on reducing CO₂ and SOx emissions, wastewater treatment and (bio)gas desulphurisation and upgrading.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Premium

    Mineral sorting for the mineral industry

    The processing of minerals places a high demand on the sorting process. REDWAVE offers flexible sorting systems which are highly effective in separating impurities from valuable minerals. The separation occurs on the basis of colour, shape, structure or material property. REDWAVE guarantees high throughput with effective recovery of required materials, achieving maximum return on the separated commodities.

    By REDWAVE a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Premium

    Industrial solutions for manufacturing industry

    WesTech partners with manufacturing in every industry worldwide. For raw water treatment, wastewater treatment and water reclamation, process equipment supplied and manufactured by WesTech is designed to work and built to last. Design-build, plant expansions, and upgrades are each approached from a holistic view of the flow sheet and a broad base of experience in yours and other industries with similar challenges, always with an eye for efficiencies that go to the bottom line.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you