Wastewater Influent (Influent) Equipment Available In Quebec
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
With a fully automated screw pump selection program the optimum screw pump can be choosen for any particular ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
With a fully automated screw pump selection program the optimum screw pump can be choosen for any particular ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
BIOFORâ„¢ is a biological submerged filter containing a fixed, dense granular bed with influent wastewater flowing in an upward direction. The system employs a proprietary media that serves as a biological contactor as well as a filter, eliminating the need for separate clarification and saving ...
-
Manufactured by GloTech Corporationbased in USA
GloTech’s LSF series grit classifier is a reliable and cost effective solution for removing grit from primary wastewater influent. The system consists of a hopper, low speed shaft-less screw conveyor, and optional washing system. These rugged units are constructed from high quality 304 or 316 stainless steel, and are designed to ...
-
Manufactured by GZ QWell Environment Protection Technology Co., Ltd.based in CHINA
This equipment is our according to customers requirement produce ,water recovery systems, processing capacity of 400 tons / day. Influent wastewater reached emission standard, the water conductivity ...
-
Manufactured by Entex Technologies Inc.based in USA
The contact stabilization activated sludge process (CSASP) typically achieves the same treatment efficiency in a smaller volume than conventional activated sludge plants. CSASP is particularly suited for small to mid-scale plants where influent wastewater contains a high fraction of particulate COD. With CSASP, the same amount of mass sludge ...
-
Manufactured by BiOWiSH Technologiesbased in USA
BiOWiSH-Aqua FOG is specially formulated for wastewater or influent streams with fat, oil and grease content over 100mg/L. This product significantly improves the efficiency of aerobic treatment systems, dissolved air flotation units, oil water separators and grease ...
-
Manufactured by Pollution Control Systems, Inc. (PCS)based in USA
Pollution Control Systems, Inc. (PCS) is pleased to provide the following equipment specifications for your consideration. One (1) prefabricated carbon steel Oil Coalescing Separator (OCS) constructed in accordance with the plans and specifications stated herein. The OCS removes free and dispersed non-emulsified oil from the influent ...
-
Manufactured by FlotLifebased in LATVIA
To prevent entire wastewater treatment system from blocking and mechanical damages, the influent wastewater quality must be as uniform as possible. Balance tank is where nonuniform wastewater is first collected and mixed in order to be pumped forward to the wastewater treatment system at a more uniform ...
-
Manufactured by Tenco Hydro, Inc.based in USA
The Tenco Hydro Clari-Pac C is used to separate free floating oil in wastewater. The influent energy is dissipated and evenly distributed as it enters the coalescing chamber, where coalescing media produces a weaving flow pattern to promote contact and coalescence of smaller oil globules into larger sizes. The increased rise rate due to the ...
-
Manufactured by Lemna Environmental Technologies, Inc. (LET)based in USA
Creating flow patterns to guide wastewater from influent source to effluent outlet for improved aeration and settling capabilities. The LemTec™ Hydraulic Baffle System was the first of its kind! LET developed and began integrating reverse mitered baffle technology into our wastewater treatment process designs to address common ...
-
Manufactured by Excel Filtration Pvt. Ltd.based in INDIA
The Effluent Treatment Plants designed by EFPL provides the best possible engineering solutions by treating a wide range of pollutants from the wastewater and influent streams. Pollutants such as suspended solids, organic (refractory & non-refractory), inorganic, heavy metals, oil, and grease are removed from the influent. ...
-
Manufactured by Hubert Stavoren B.V.based in NETHERLANDS
production in a fresh water environment). Applications are more often found in the influent of wastewater ...
-
Manufactured by Definitive Ecologybased in ITALY
Definitive Ecology INFLOSCREEN model FS is composed of a drum that is semi-submerged in the channel and installed horizontally in line with the influent wastewater. The frame is secured and sealed between the walls of the channel to avoid leakage with consequent efficiency losses. The drum can be supplied with a self-cleaning wedge ...
-
Manufactured by OR-TEC, Incorporatedbased in USA
OR-TEC True Grit Systems are used in the separation and removal of sand and grit from the influent of wastewater treatment plants. The system features an in-ground concrete tank with mechanical mixers and paddles manufactured from stainless steel. These mixers and paddles create a vortex which settles the grit/sand. An air pump removes the ...
-
Manufactured by ECOfluid Systems Inc.based in CANADA
USBF bioreactor incorporates anoxic and aerobic compartments, and upflow sludge blanket filter(s). Operation of a USBF plant is simple and self-regulating. Influent wastewater (see 1 on diagram) enters the anoxic compartment of the bioreactor where it mixes with activated sludge recycled from the bottom of the sludge blanket filter (2). ...
-
Manufactured by Purestream, Inc. and Purestream ES , LLCbased in USA
The In-Eko Mechanical Bar Screen is an automated self-cleaning bar screen primarily used for headworks screening of the influent wastewater before entering the treatment plant. It has also been used in freshwater applications to screen the water before entering potable water plants. The supporting structure of the screen is fabricated of ...
-
Manufactured by SkimOil, LLCbased in USA
These fiberglass units have the unique capability to be modified to fit the application, in that it has a built in oil reservoir which typically has a horizontal plate that separates it from the effluent chamber. These two chambers can be divided horizontally or vertically, or combined to fit your system needs. This unit will typically deliver an effluent quality of 10ppm or less of unemulsified ...
-
Manufactured by Biowater Technology ASbased in NORWAY
Biowater’s proprietary CFIC® technology offers industry-leading performance when compared with widely used Activated Sludge and MBBR solutions. The small footprint, combined with Biowater’s approach to process design makes this far more versatile than existing solutions, making it very suitable for a wide range of existing ...
-
Manufactured by Schreiber LLCbased in USA
Schreiber’s Screw Pumps are manufactured in two types, Open Flight Screw Pump and Tube Mounted Screw Pump (available in variable angle and stationary angle). The Open Flight Screw Pump is a traditional Archimedes, with a design concept that dates back over 2,000 years. The Tube Mounted Screw Pump is a variation of the Archimedes screw pump inserted in a steel tube (pipe). The Tube Mounted ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you