Only show results in Virginia? Ok

Ion Exchange Resins Applications

  • Industrial water demineralisation

    Deionized water, also known as demineralised water, is water that has had its mineral ions removed, such as cations like sodium, potassium, calcium, magnesium, iron, and anions such as chloride, nitrate, sulfate, bicarbonate and even silica. Deionization is a chemical process that uses specially manufactured ion exchange resins which exchange hydrogen ion and hydroxide ion for dissolved minerals, which then recombine to form water. Because the majority of water impurities are dissolved salts, deionization produces a high purity water that is generally similar to distilled water, and this process is quick and without scale buildup.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Analysis of Methylimidazoles in Caramel Colored Carbonated Beverages

    Caramel colorings are used as additives in a broad range of food and beverage products to impart a desired color, but have no nutritional or preservative function. Recently, the potential hazard to humans of ammonia- and ammonia-sulfite-process caramel colorings was raised, because they contain the by-product 4-methylimidazole, which is a potential carcinogen.1 The methylimidazole compounds are difficult to analyze due to their polar nature and low molecular weight. Traditional reversed phase techniques are unsuccessful in retaining these small polar compounds. Therefore, most HPLC methods utilize ion-exchange resins for analysis. Another common method involves GC analysis after the analytes first undergo a derivatization step. The purpose of the work shown in this article was to develop a simple and fast analytical method to determine the levels of 2-methylimidazole and 4-methylimidazole in caramel colored carbonated beverages.

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA).

  • Industrial water Gold and Silver

    Cyanidation is still the most widely used method to leach gold, using sodium or calcium cyanide as lixiviant. An anionic gold-cyanide complex is formed that is extractable by basic resins. Other metals present in the ore, such as silver and base metals ( copper, nickel, cobalt, zinc, iron, etc. ) are also leached in cyanide media. Selective ion exchange resins are designed to preferentially adsorb the mono-valent gold-cyanide species.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water TOC and Color removal from water

    All surface waters contain varying amounts of naturally occurring organic acids. The most commonly encountered being tannic and humic. These substances have varying molecular weights and varying amounts of carboxylic functionality. There has been much interest in the removal of these substances from drinking water supplies due to their tendency to form THM`s when chlorinated. They can be removed effectively by use of anion exchange resins operated in the chloride cycle. Because the organics can be removed by regeneration with brine, this technology is far most economical.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Deionized Water Testing

    Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car wash.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Treatment Solutions for Uranium Removal

    AdEdge provides treatment systems for for Uranium removal using AD92 an anion exchange media that is ideal for use in potable water as well as non-potable and environmental remediation applications for removal of naturally occurring uranium. The high efficiency AD92 can selectively remove the negatively charged uranium anion (most often in the form of uranyl carbonate) to below the existing EPA MCL of 30 ug/L. The AdEdge AD92 systems can deliver the needed performance in two ways: (1) via regeneration type systems which use the media to remove the uranium with periodic regeneration using NaCl brine; or (2) as a “throw away” discardable media, which can be discarded when spent. This option maximizes the very high capacity of the AD92. Where on-site regeneration is not available, this disposal option is the preferred option. Disposal options will vary based on federal, state, and local regulations.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Industrial water softening

    The presence of certain metal ions in water causes a variety of problems. These ions interfere with the action of soaps, lead to build up of limescale, which can foul plumbing, boilers, heating equipment. Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water extends the lifetime of plumbing and heating equipment. Softening of low TDS ( Total Dissolved Solids ) water is done commonly with a Strong Acid Cation ( SAC ) exchange resin operating in the sodium form and regenerated with brine. PuriTech`s latest development is a very performant continuous ion exchanger, based on PuriTech`s innovative ION-IX technology which is based on true counter-current ion exchange.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water boiler feed water

    Ion exchange is an effective, versatile means of conditioning boiler feedwater. The term “ion exchange` describes the process : as water flows through a bed of ion exchange material, undesirable ions are removed and replaced with less objectionable ones. For example, in softening processes, calcium and magnesium ions(hardness) are exchanged for sodium ions. In dealkalization, the ions contributing to alkalinity(carbonate, bicarbonate, etc.) are removed and replaced with chloride ions.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water Ammonia & Arsenic removal from water

    Nitrogen is a nutrient essential to all forms of life as a basic building block of plant and animal protein. Nevertheless, too much of it can be toxic. The processes used for the removal of ammonium ions from drinking waters include ion exchange. PuriTech`s ION-IX system can be broken up into 4 distinctive zones with each zone operating continuously. The resin is initially loaded with the Ammonia ions (and partially calcium and magnesium)in the adsorption zone. As the ION-IX multi-port valve rotates, the resin that has been saturated with Ammonia ions (and some calcium and magnesium ions)moves into a one-bed displacement zone with softened water to ensure hard water does not cause precipitation within the multi port valve.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Advanced water treatment equipments for ion exchange

    Ion exchange is an exchange of ions between two electrolytes or between an electrolyte solution and a complex. In most cases the term is used to denote the processes of purification, separation, and decontamination of aqueous and other ion-containing solutions with solid polymeric or mineralic `ion exchangers`.

    By Advanced Equipment and Services, Inc. (AESINC) based in Coconut Creek, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you