Ion Exchange Resins Equipment For Water And Wastewater Available In Mozambique
-
ShowcaseManufactured by Samyang Corporationbased in SOUTH KOREA
TRILITE WAC exchange resin uses carboxyl group (-COOH) as the functional group, and it is weak acidic with no salt splitting capacity, meaning it does not dissociate or exchange ions in acidic ...
-
PremiumManufactured by Samyang Corporationbased in SOUTH KOREA
TRILITE dry resin is used in gas-phase chemical filters designed to remove specific ions from the ...
-
PremiumManufactured by Samyang Corporationbased in SOUTH KOREA
TRILITE mixed bed resin is a product that is made by mixing and post-treating SAC exchange resin in the H+ type and SBA exchange resin in the OH- type in various volume or exchange capacity ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Removes clear water iron and softens your water. Simple program set up, then relax. Just add water softening ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The AmiPur PLUS amine purification system features Recoflo® ion exchange to continuously remove heat stable salts (HSS) from the amine circuit. A lean amine solution passes through the ion exchange resin bed where the HSS are selectively removed and the purified amine is recycled back into the circuit, allowing for consistent performance and reduced amine purchasing ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep Carb 2 - 100/4.0 IC column is particularly suitable for the determination of carbohydrates using alkaline eluents and pulsed amperometric detection. The high-capacity anion exchanger column is based on a styrene-divinylbenzene copolymer. It is stable in the range of pH = 0 - 14 and provides separation of glucose, fructose, and sucrose. It is also suitable for the analysis of some ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep Carb 2 - 250/4.0 IC column is particularly suitable for the determination of carbohydrates using alkaline eluents and pulsed amperometric detection. The high-capacity anion exchanger column is based on a styrene-divinylbenzene copolymer. It is stable in the range of pH = 0 - 14 and separates monosaccharides and disaccharides. It is also suitable for the analysis of sugar alcohols, ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Hamilton RCX-30 - 150/4.6 is a column for separating monosaccharides, disaccharides, oligosaccharides and sugar alcohols. It is an anion exchange column based on polystyrene-divinylbenzene resin. The RCX-30 - 150/4.6 can be used for universal applications. The Hamilton RCX-30 - 150/4.6 separation column exhibits an outstanding separation of fructose and lactose. The column also offers the ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Ion exchange resins need to be regenerated after application, after that, they can be reused. But every time the ion exchangers are used serious fouling takes place. The contaminants that enter the resins will not be removed through regeneration; therefore resins need cleaning with certain chemicals. Chemicals that are used are for instance sodium chloride, potassium chloride, citric acid and ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Metrosep A Supp 16 is ideal for high-capacity separation problems and distinguishes itself with its outstanding resolution, even with complex separation problems. The Metrosep A Supp 16 separation column is based on a surface-functionalized polystyrene-divinylbenzene copolymer. The functional groups are bonded covalently. This and the surface structure of the anion exchanger results in unique ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Tankhouse electrolyte flows through the Bismuth Antimony Removal System (BARS) for removal of bismuth and antimony. The system uses Recoflo technology and selective ion exchange resin for the removal. The resin is regenerated with a small amount of hydrochloric acid (HCl) and a catalyzed reducing agent. Recognizing that chloride can be a contaminant for the copper electrolyte, the system is ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The use of amine is a leading technology for CO2 removal in petrochemical and fertilizer plants and capture of CO2 from flue gas generated in coal-fired power stations as part of the Carbon Capture and Storage (CCS) approach to the mitigation of global warming. Amine solvent technology has been widely used for many years to capture CO2 and H2S in oil refineries and gas processing plants in order ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Ion-exchange resins are used to replace the magnesium and calcium ions found in hard water with sodium ions. When the resin is in its regenerated form, it contains sodium ions at its active sites. When in contact with a solution containing magnesium and calcium ions (but a low concentration of sodium ions), the magnesium and calcium ions preferentially migrate out of solution to the active sites ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Refineries and gas processing plants commonly use amine chemistry to remove hydrogen sulfide from process gases to meet product specifications, emissions standards, or other process requirements. During normal operation, contaminants can enter and amine circuit with the process gas and can result from amine ...
-
PremiumManufactured by C&G Depurazione Industriale S.r.l.based in ITALY
High quality condensate: Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The tankhouse electrolyte flows through the Arsenic Removal System (ARS) for the removal of arsenic. The system uses Recoflo technology and selective ion exchange resin for the removal of arsenic. The purified electrolyte stream is recycled back to the tankhouse while the resin is periodically regenerated to produce a concentrated, dissolved arsenic salt ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekrarr Model 1308 Recirculating Water Purification System is an inexpensive, convenient source of deionized, mercury-free water for the Series 3300Xi Mercury CEM. The system has two stages of pre-filtration to eliminate all particulate and organic contamination in the water. A reverse osmosis (R/O) unit then removes the bulk of ionic material. Two stages of finishing ion exchange (IX) resin ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The AmiPur PLUS amine purification system features Recoflo ion exchange to continuously remove heat stable salts (HSS) from the amine circuit. A lean amine solution passes through the ion exchange resin bed where the HSS are selectively removed and the purified amine is recycled back into the circuit, allowing for consistent performance and reduced amine purchasing ...
-
PremiumManufactured by C&G Depurazione Industriale S.r.l.based in ITALY
Elimination of the Liquid: The ES series allows you to obtain a concentrate in the form of dry mud/crystals in the boiling chamber, and a condensate that can be recycled into the industrial process. Volumes processed 100 – 1,000 ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
The TL-simplex softeners from Lenntech use ion exchange to soften the water. A single Fleck controller controls a resin column and a brine tank. The Fleck 2750 can handle flow up to 5 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you