Knife Gates Equipment For Water And Wastewater Available In Yemen
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Automatic Scraper Strainer has been designed to remove solids from 150mm in size down to 75-micron particles. The general literature piece describes the various connection options available as well as the advantages of a scraper strainer over a backwash strainer. These strainers are available with connections from 1″ up to 48″ in fabricated carbon steel, stainless steel, and ...
-
Manufactured by Stafsjö Valves ABbased in SWEDEN
Stafsjö’s high pressure knife gate valves HP, HPT and HX are all strenthened to withstand high bi-directional pressures. They are equipped with through-going "O" port gates and this secure a really safe and reliable shut-off of static and highly concentrated media. This shut-off performance, along with its excellent flow characteristics, makes them suitable for really demanding ...
-
Manufactured by Galliford Trybased in UNITED KINGDOM
Full bore design resilient and metal seated Knife Gate Valve providing tight shut off on sludges, slurries, powders and clean fluids. Smooth round bore and chamfered blade handle a variety of media with minimum pressure drop. The smooth machined finish is ideal for stringy materials e.g. long fibre paper stock. Full clear bore suitable for pigging. Minimal chest volume. A compact valve with ...
-
Manufactured by CYL Knife Valves S.L.based in SPAIN
SK series is a bi-directional short face-to-face knife gate slurry valve designed to handle abrasive slurries from mineral extraction processes: iron ore, copper ore, gold ore, soda ash, phosphate, coal, gypsum and cement. Equipped with two field replaceable rubber sleeves, ensures a bi-directional shutoff against heavy ...
-
Manufactured by AB Valves GmbHbased in GERMANY
Knife type gate valves are designed for top performance and a long maintenance free lifetime. They can be found in various industries. The stainless steel knife gate valve is a highly precise manufactured valve, designed for a tight closure of mainly mediums with a more heavy consistency. Its knife-like edge cuts through heavy or high viscous fluids. Knife edges are machine chamfered to reduce ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Elgin’s Hyper-G™ Shale Shaker provides power, performance and a new standard in practical design. Capable of producing up to 7 G’s of force and coupled with a variable frequency drive, the Hyper-G™ provides power when you need it. By adding a single point jacking system and an improved screen fastening system, you now have a shaker that is as easy to operate, as it is ...
-
Manufactured by FLSmidthbased in USA
Isolate your pumps simply and automatically with our Ball-Check Valves; Isolate the duty and standby pumps in your mineral processing circuit with our two-way, floating ball-check KREBS Tech-Taylor Valve (TT). Requiring no air or electricity to operate, the Tech-Taylor Ball-check valve is the most cost-effective and efficient answer for pump isolation when you have two pumps in ...
-
Manufactured by CYL Knife Valves S.L.based in SPAIN
The MU series knife gate is a uni-directional wafer valve, soft or metal-metal seated, equipped with adjustable stuffing box. Valve designed to handle pulp, arid and powder mediums, mainly used in industrial bulk and silo outlet applications. Sleeve (DN50-DN300) and packing material can be replaced without valve disassembly from the ...
-
Manufactured by Castings Services Group (CSG)based in UNITED KINGDOM
CSG supply a variety of isolation valves suited to water, waste water and gas ...
-
Manufactured by Sistag AGbased in SWITZERLAND
Handwheel actuated DN 50–600 with non-rising stem DN. 600–1600 with bevel gear and rising stem. Materials acc. to data sheet 2.0.13. Corros on protection acc. to data sheet 2.0.12. Flange drilling: PN 10/16 EN 1092 / ISO 7005. Face-to-face: EN 558 / ISO 5752 part 20. Nominal pressure PN: DN 50–300 10 bar. DN 350–400 6 bar. DN 450–1600 4 bar. Operating pressure: Refer ...
-
Manufactured by CYL Knife Valves S.L.based in SPAIN
The SL series is a bi-directional long face-to-face knife gate slurry valve designed to handle abrasive slurries from mineral extraction processes: iron ore, copper ore, gold ore, soda ash, phosphate, coal, gypsum, cement and limestone. Equipped with two heavy-duty, field replaceable rubber sleeves, ensures a bi-directional shutoff against heavy ...
-
Manufactured by Water Technology Resources (WTR)based in USA
Size Range 2" - 72" and Larger. Special Alloy Construction. Special Linings. Bi-Directional ...
-
Manufactured by Sistag AGbased in SWITZERLAND
Material acc. to data sheet 2.0.13. Body and upper construction with epoxy powder coating. Stainless steel part without coating. Flange drilling: PN 10/16 EN 1092 / ISO 7005. Face-to-face: EN 558 / ISO 5752 part 20. Nominal pressure PN: DN 50–200 4 bar. Operating pressure: DN 50–125 1 bar. DN 150–200 1 bar. For dead-end installation we recommend to use steel-enforced rubber ...
-
Manufactured by Bionomic Industries Incbased in USA
The CycloPlus collector is an advanced cyclone design that offers high retained solid particulate collection as either a primary particulate device for dust removal or recovery or to act as a precleaning stage to reduce particulate loadings ahead of a fabric filter collector to increase fabric filter life, or wet scrubber and reduce scrubbing liquid blowdown. CycloPlus features a proprietary ...
-
Manufactured by Salina Vortex Corporationbased in USA
The Vortex Quantum Orifice Gate is specifically engineered to handle dry bulk solids in gravity flow, dilute phase, or vacuum conveying systems with pressures up to 15 psig (1 barg) depending on size. Traditional slide gates and butterfly valves commonly allow packing of material, which prevents positive air and material ...
-
Manufactured by Glenfield Invicta Ltd.based in UNITED KINGDOM
AVK combination air valves are designed to combine large volume of air discharge/intake whilst filling/draining a pipeline with automatic discharge of air from the fluid. They feature an innovative design with a large air gap between liquid and sealing system. A spring between stem and float compensates for slight pressure changes and maintains the air gap ensuring reliable function even when ...
-
Manufactured by AMMtech s.r.l.based in ITALY
Circular, Square, Rectangular section. For Control or On/Off Service. DN 100 – 3000. Max Leakage Class ØLeakage Tenuta Perfetta. End Connections: Flanged. Material: Carbon Steel, Corten, AISI 304, AISI 316, AISI 310, AISI ...
-
Manufactured by Paravalvesbased in SPAIN
Extreme pressure slurry knife gate valve solutions for the mining and mineral processing industry. Slurry knife gate valves are specially made for the mining industry, for loaded fluid lines like sludge or abrasive services. The main characteristic of the slurry knife gate valve is that it provides a full continuous flow. In open position the two rubber wear-resistant sleeves are in close contact ...
-
Manufactured by Paravalvesbased in SPAIN
Slurry knife gate valve solutions for the mining and mineral processing industry, with short patter face to face design. Slurry knife gate valves are specially made for the mining industry, for loaded fluid lines like sludge or abrasive services. Slurry knife gate valves performs also well for waste water treatment, pulp and paper industry, chemical plants, silo outlet and thermal power plants. ...
-
Manufactured by Asteknik Vanabased in TURKEY
7100 Type is a bi-directional valve to be used for fibrous fluids such as water treatment. With an undercut blade, it ensures that the deposits ın the liquid can be easily cleaned. Actuation types are with gear box, handwheel, chainwheel and pneumatic or electrical. İt has rising and non-rising stem ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you