Lagoon Aeration Equipment For Water And Wastewater Available In British Columbia
-
PremiumManufactured by Reliant Water Technologiesbased in USA
The Reliant Lagoon Commander Pond/Lagoon Mixer continuously, and slowly, moves water along the bottom of a lagoon/pond, continually mixing the entire water column using a minimum of energy. When compared to standard surface aerators or directional mixers, the Lagoon Commander is more efficient, less costly to operate, and requires minimal ...
-
based in USA
MicroClear 102 is a high potency, bacteria-laden, powdered formulation for use in controlling algae through the competition of available nutrients in the water. MicroClear 102 contains a specially formulated, proprietary blend of microorganisms and surface tension suppressants/penetrants. Because of the diversity of the microorganisms' enzymes, this product is excellent for increasing water ...
-
Manufactured by Roebic Laboratories, Inc.based in USA
ROETECH 103 is a highly concentrated spore mixture of three patented Bacillus bacteria. The blend exclusively contains bacteria which can grow over a wide temperature range of 5°C to 55°C. Applications for ROETECH 103 include wastewaters which have either unusually low temperatures or unusually high temperatures or wide fluctuations in temperature. Examples include aeration basins, lagoons with ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Material Features: Simplex or duplex configuration. Designed for high airflow capacity. Available in 24-inch length (610 mm). Clog resistant self-purge design. Full 48-inch air release perimeter (1220 mm). Standard units in stock for immediate shipment. Standard open bottom with optional closed bottom units available. PVC or optional CPVC construction for maximum chemical and temperature ...
-
Manufactured by Newterra, Ltd.based in CANADA
Pulp and paper mill wastewater treatment produces a large amount of residual solids, presenting a number of issues in relation to wastewater treatment, discharge, and sludge ...
-
Manufactured by Jet Inc.based in USA
Bio Jet 7 ;Dry Packs improve the efficiency of all wastewater processes, including septic systems, aeration systems, wastewater lagoons or ponds, wastewater retention tanks and drain lines. Homeowners can flush the dry packs for easy, convenient preventative maintenance. Made in the USA. ...
-
Manufactured by Netsol Water Solutions Pvt. Ltdbased in INDIA
Netsol Water Solutions is a leading Water Treatment Plant Manufacturer in India. A Water Treatment Plant/WTP is used to make water more acceptable for a desired end-use. These can include use as drinking water, industrial processes, medical and many other uses. The goal of our effective water treatment plant is to remove existing contaminants in the water and reduce the concentration of such ...
-
Distributed by BowRio Water Technologies Inc.based in CANADA
The Aqua-Jet surface mechanical aerator may possibly be the most imitated waste water aerator in the world. But, as with other manufactured products, copies never equal the original in terms of reliability and ...
-
Manufactured by Inovairbased in USA
The Inovair IC Series is the industry’s first high efficiency integrally geared modern design delivers reduced energy consumption, reduced noise/pulsations, less frequent maintenance and improved durability. The innovative IC system design minimizes footprint and allows the use of off-the-shelf economical TEFC or ODP motors and VFDs, along with a simple and affordable control system. Thanks ...
-
Manufactured by Lemna Environmental Technologies, Inc. (LET)based in USA
The LemTec Biological Treatment Process™ (LBTP) is an advanced, aerated lagoon treatment process capable of meeting some of the most stringent treatment parameters. This state of the art treatment process focuses on eliminating many of the short comings of traditional aerated lagoon processes and enhancing many of their ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Material Features: Clog resistant, large diameter diffuser elements with above water air distribution piping. 1” & 2” nominal pipe sizes available. Turbulent mixing with multiple shear planes and edge contours to fragment bubbles for maximum efficiency. High bubble shear for maximum mixing. Low maintenance. ABS—non-corrosive ...
-
Manufactured by Aqua-Aerobic Systems, Inc. - a subsidiary of the METAWATER Groupbased in USA
10 inch (25 cm) diameter, different slit patterns available to suit specific applications. Airflow Range: from 0.5 to 10 SCFM (0.8 to 17 m3/hr) per diffuser. Performance: Standard oxygen transfer efficiency from 1.5% to over 2.0% per foot of submergence. Diffuser performance is calculated for each specific application based on flux, density, depth and several other parameters. Please contact an ...
-
Manufactured by Nexombased in CANADA
Reduce TAN to <1mg/L: You need to achieve effluent Total Ammonia-Nitrogen levels down toSave space, time, and money: You'd like to do it on a compact footprint, and as usual, the simpler to operate and more inexpensive the solution, the ...
-
Manufactured by Jäger Umwelt-Technik GmbHbased in GERMANY
Lagoon or pond aeration needs special attention due to its size and characteristics. Jetflex Clearpond offers optimum solution for pond ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
Efficient and reliable mixing and aeration for lagoon wwtps. For the important task of mixing and aeration in aerated lagoon treatment plants the engineer or operator had only two options until today: He could either use surface aerators or floating membrane aerators. While the surface aerators usually do not provide economical oxygen transfer performance and insufficient mixing, the floating ...
-
Manufactured by Process Engineering Srlbased in ITALY
Process Engineering - PE has developed a specific Technology and Know-How for the “Aerated Lagoon” through the proper use of the HelixoR and Jet-Helix systems in this particular ...
-
Manufactured by Jaeger Aerationbased in USA
Lagoon Aeration: Oxidation for BOD removal, NH3 – Nitrification, Mixing. Deployment Method: Floating Pontoons for variable water levels, Self-weighted drop in & retrievable rack system. Mixing & Aeration: Area of influence up to 50’ [15m], Depth installed 5’ to 30’ [1.6m to 9m]. Mechanical plants: Replacement of aeration equipment, Supplemental aeration ...
-
Manufactured by Environmental Dynamics International (EDI)based in USA
Coarse bubble diffuser systems offer moderate oxygen transfer efficiency and low maintenance with aggressive mixing, providing circulation and turbulence that ensures the entire water column is mixed adequately and sludge accumulation is limited. They are a very robust solution, with no moving parts in the water and orifices that are less prone to clogging than other forms of ...
-
by Amitec Srlbased in ITALY
Fuchs Enprotec GmbH is a German globally recognized manufacturer of aerators and mixers for waste water and sewage sludge treatment. Amitec, as the exclusive representative of Fuchs products in Italy, can offer the profound expertise due to over 40 years of research and development in the sector of aeration systems and mixers gained by Fuchs with references in about 60 countries around the world, ...
-
Manufactured by Biofuture Ltdbased in IRELAND
Biological degradation of fats and greases, proteins, lactose and other organic materials in dairy effluents. The main problem with the effluent from dairies is the large amounts of animal fats present. These cause major problems by coating drains, pumps, pumping stations, inlet screens and primary clarifiers. In many activated sludge plants excessive quantities of fat can give rise to Nocardia ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you