Leachate Treatment Equipment For Water And Wastewater Available In Iraq
-
PremiumManufactured by Reef Industries, Inc.based in USA
Handling, treating and containing liquids is a requirement for a wide and varied array of businesses and industries. From raw water to hazardous waste leachate solutions, pit and lagoon liners conserve or contain liquids as reserves or to segregate them from the environment. Chemical inertness in the presence of aggressive media and long-term service life in exposed and extreme conditions are the ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 2000 is a dry product intended to solidify drilling spoils for disposal purposes. SLURRYBOND 2000 is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a ...
-
PremiumManufactured by CETCObased in USA
Your first choice for removing organic contaminants from water or sediment, the ORGANOCLAY product range provides formulations to meet almost any adsorption application. Used and trusted worldwide, it's proven to work efficiently and ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
One of the ways to remove volatile organic compounds (VOCs) from wastewater is to use a pack tower air stripper. The pack tower is a counter-current design where the wastewater is injected at the top of the tower and the air is introduced at the bottom. In the middle of the tower, the packing material agitates the water and strips the contaminants. The contaminants are then released either to the ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 11800 skimmers are high volume, wave tolerant skimmers for use in tanks, ponds, harbors, wastewater clarifiers and with vacuum trucks. For complete clean-up and recovery systems, skim-pak skimmers can be combined with tested ...
-
PremiumManufactured by Intecna srlbased in ITALY
Innovative methods are continuously required in water purification of a wide range of wastewater pollutants especially in case of difficult approach. Electrocoagulation system optimised by INTECNA, provides a relatively compact and robust wastewater treatment plant alternative in which special alloy metal anodes initiate electrochemical reactions that provide active metal cations for coagulation ...
-
PremiumManufactured by Intecna srlbased in ITALY
Throughout the last ten years, several experimental works about the Ferrates laboratory and pilot production process and their application have been published. Ferrates showed a very high oxidant capacity, for the state of oxidation, especially for of the iron (VI) (SODIUM FERRATE), which sparked a remarkable interest in its applications both for disinfection and for especially difficult to be ...
-
PremiumManufactured by KISTERSbased in GERMANY
Long-lasting and energy-efficient UV-LED technology and a robust design are the core features of LISA UV. Like all TriOS sensors LISA uses the unique nanocoated windows combined with compressed air flushing to achieve long operating times without ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 2000 G is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 G is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test. SLURRYBOND 2000 G will solidify waste slurry on the job site and allow waste to ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Filter sand, supplied in bags and pallet packages: The filter sand, consisting of 99.5% SiO2, is extremely low in trace metals and aromatic hydrocarbons. This makes our filter sand the best sand available for monitoring well ...
-
PremiumManufactured by CETCObased in USA
The Global Standard for GCLs: Sodium bentonite-based GCLs provide an excellent hydraulic barrier in applications where leachate in direct contact with the GCL is relatively non-aggressive, or in composite lining applications where the GCL is overlain by a thermally welded geomembrane and hydrates from uptake of innocuous moisture from the subgrade. ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 200 is a proprietary solid, granular super-absorbent polymer that rapidly absorbs and retains aqueous matter. SLURRYBOND 200 is made from non-biodegradable polymer designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or slump ...
-
PremiumManufactured by C&G Depurazione Industriale S.r.l.based in ITALY
Leachate is a product derived from the anaerobic transformation of the organic substances present in the waste. It is a liquid with different levels of pollutants present, the form and quantity of which will depend on factors such as the type of landfill, and the quantity of rainwater which filters through the landfill, mixing with the humidity of the waste ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 2000 skimmers are rugged, compact and portable for operation in sumps, tanks and pits, and separators. Capable of fitting through a 24” access, the Series 2000 skimmers utilize a unique self adjusting flow control eliminating manual adjustments. All of this results in a greater recovery of oil with less water and higher overall recovery rate with associated lower ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Durable and robust water level and datalogger. Housing is corrosion proof. Conductivity range of 0 to 120 mS/cm. Long-term solution for monitoring saline environments. Available in various measuring ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Megaflux-cMBR is an immersion type membrane module and cassette frame suitable for the MBR process of small to large capacity wastewater treatment. It is applied not only to general sewage treatment but also to wastewater treatment and water reuse. In addition, when replacing an existing membrane, it can be easily replaced as it is manufactured in the same ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 18500 skimmers are high volume, wave tolerant skimmers for use in tanks, ponds, harbors, wastewater clarifiers and with vacuum trucks. For complete clean-up and recovery systems, skim-pak skimmers can be combined with tested ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND is a powdered inorganic mineral formula used for the solidification of high solids drilling slurries. SLURRYBOND is made from a non-biodegradable mineral designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test. SLURRYBOND will solidify waste slurry on the job site and allow waste to be transferred to the disposal ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Robust and durable water level logger with corrosion proof housing. Perfect long term solution for saline environments. Housing is corrosion proof, robust and durable. Available in various measuring ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you