Leachate Treatment Equipment For Water And Wastewater Available In Maine
-
PremiumManufactured by CETCObased in USA
Your first choice for removing organic contaminants from water or sediment, the ORGANOCLAY product range provides formulations to meet almost any adsorption application. Used and trusted worldwide, it's proven to work efficiently and ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 2000 is a dry product intended to solidify drilling spoils for disposal purposes. SLURRYBOND 2000 is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Filter sand, supplied in bags and pallet packages: The filter sand, consisting of 99.5% SiO2, is extremely low in trace metals and aromatic hydrocarbons. This makes our filter sand the best sand available for monitoring well ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Megaflux-eMBR is a submergible membrane module optimized for wastewater treatment MBR process. PHILOS has developed the highest performance composite membrane and anti-pollution technology. Megaflux-eMBR shows stable filtration performance for a long period of time even in the MBR wastewater treatment process under unfavorable ...
-
PremiumManufactured by Intecna srlbased in ITALY
Throughout the last ten years, several experimental works about the Ferrates laboratory and pilot production process and their application have been published. Ferrates showed a very high oxidant capacity, for the state of oxidation, especially for of the iron (VI) (SODIUM FERRATE), which sparked a remarkable interest in its applications both for disinfection and for especially difficult to be ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 18500 skimmers are high volume, wave tolerant skimmers for use in tanks, ponds, harbors, wastewater clarifiers and with vacuum trucks. For complete clean-up and recovery systems, skim-pak skimmers can be combined with tested ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Eolo represents the efficient, fast and economic remedy for the realisation of a perforated floor in reinforced concrete with high load-bearing capacity, which can be also accessed by heavy vehicles. Thanks to the vertical asymmetric nozzles, axially perforated, it can be conveniently used for the distribution of air in composting, waste stabilisation systems, deodorising systems and for ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Fit for all types of water samplings. Very cheap, allows renewal prior to each sampling event. Environmentally friendly plastic (PE). PE: No phthalates, metals, colorants. Extremely low leaching characteristics are ETU tested 2x/yr. Every roll comes with a certificate showing all leaching data above detection limits. Produced and packed by West-European producer, ISO certified.. Stored in well ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
Our LANDY submersible DCP pump with open channel impeller is ideally suited for slightly contaminated wastewater. This high efficient pump is featured by a compact design, high pressure and non-clogging performance. ...
-
PremiumManufactured by C&G Depurazione Industriale S.r.l.based in ITALY
Leachate is a product derived from the anaerobic transformation of the organic substances present in the waste. It is a liquid with different levels of pollutants present, the form and quantity of which will depend on factors such as the type of landfill, and the quantity of rainwater which filters through the landfill, mixing with the humidity of the waste ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Megaflux-cMBR is an immersion type membrane module and cassette frame suitable for the MBR process of small to large capacity wastewater treatment. It is applied not only to general sewage treatment but also to wastewater treatment and water reuse. In addition, when replacing an existing membrane, it can be easily replaced as it is manufactured in the same ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Using the Akkerman core sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level, casing tubes with minimal diameter 100 mm) up to a maximum depth of 50 m. The Akkerman core sampler is used in combination with a tripod and hand winch. The sampling tube is beaten into the soil using a falling hammer. After sampling ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Robust and durable water level logger with corrosion proof housing. Perfect long term solution for saline environments. Housing is corrosion proof, robust and durable. Available in various measuring ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Durable and robust water level and datalogger. Housing is corrosion proof. Conductivity range of 0 to 120 mS/cm. Long-term solution for monitoring saline environments. Available in various measuring ...
-
PremiumManufactured by Devise Engineering S.A.based in GREECE
The "ex-MBR" type Package Plant is used for extensive solids separation of biologically treated wastewater. The DEVISE ex-MBR plants incorporates an energy efficient “cross-flow” type Ultra Filtration (UF) membrane module and associated equipment and instrumentation to achieve a reliable and effective filtration process. The ex-MBR plant is a compact separation unit, with all the ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 2000 skimmers are rugged, compact and portable for operation in sumps, tanks and pits, and separators. Capable of fitting through a 24” access, the Series 2000 skimmers utilize a unique self adjusting flow control eliminating manual adjustments. All of this results in a greater recovery of oil with less water and higher overall recovery rate with associated lower ...
-
PremiumManufactured by Intecna srlbased in ITALY
Innovative methods are continuously required in water purification of a wide range of wastewater pollutants especially in case of difficult approach. Electrocoagulation system optimised by INTECNA, provides a relatively compact and robust wastewater treatment plant alternative in which special alloy metal anodes initiate electrochemical reactions that provide active metal cations for coagulation ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 200 is a proprietary solid, granular super-absorbent polymer that rapidly absorbs and retains aqueous matter. SLURRYBOND 200 is made from non-biodegradable polymer designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or slump ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
RetroFAST Septic System Enhancement is an advanced treatment unit that upgrades an under-performing septic system. The RetroFAST unit is made up of a white liner, several blue media blocks, an airlift device, and a remote blower (connected to the airlift via pipe). The blower is the only moving part for the system. The RetroFAST is a compactable unit inserted directly into the existing septic ...
-
PremiumManufactured by VEGA Americas, Inc.based in USA
For aggressive media or extremely high hygienic requirements. Application area: PFA coated or polished sensor. Even in applications with steam, buildup, foam or condensation, the sensor delivers precise and reliable readings. The VEGAFLEX 83 level sensor measures maintenance-free agressive liquids or liquid media with highest hygienic requirements. Even in applications with vapour, buildup, foam ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you