Only show results in Virginia? Ok

pump station Equipment

  • Pump Stations

    STE energy has consolidated experience in building water lifting systems by designing, supplying and installing. civil engineering works, penstocks and mass oscillation and pressure surge control systems draining pumps and centrifugal pumps. automation, protection, control and remote management systems. electric power systems and power centres ...

    By Sorgent.e Srl based in Padova, ITALY. from Mechanical Product line

  • Settled Sewage Pumping Stations

    The Ocean Settled Sewage Pump Station Range are designed to be installed post an existing septic tank to either lift the liquid to a more manageable level or to pump the settled sewage to a soakaway arrangement. Each unit is installed with pumps and pipework suitable for pumping settled sewage, and come complete with float switches, valves, ...

    By EnSo International Ltd based in Selborne, UNITED KINGDOM. from Packaged Pumping Stations Product line

  • Kessel - Model Pumpfix F - Backwater Pumping Station

    Pumpfix F pumps against backwater and discharges surface water. It protects drainage fixtures such as shower, sink ,washing machine and outside steps down to the basement which are below the backwater level. The wastewater is discharged continually and without the use of energy to the sewer through gravity. In the event of backwater the pump ...

    By Kessel AG based in Lenting, GERMANY. from Hybrid Lifting Stations Product line

  • Multi-Pump Station Controller

    Motor Controls MPC series pump station controllers provide automated variable speed control of multi-pump applications. Boosters, Tank Fill and lift stations. Ideal for retrofitting existing stations with energy conserving controls.

    By Motor Controls, Inc. (MCI) based in Dallas, TEXAS (USA).

  • Lift-Rail - Wastewater Pumping Stations

    Lift-Rail wastewater pumping stations feature Norweco’s exclusive remote pump removal system and rail-sealing flange. Thirty-six models of Norweco submersible pumps are available for all types of sanitary and storm sewers. Incorporating two alternating pumps for superb reliability, Lift-Rail pumping stations pump wastewater up to a treatment ...

    By Norwalk Wastewater Equipment Company, Inc. (Norweco) based in Norwalk, OHIO (USA).

  • Peanut Flooded Suction Sewage Pumping Stations

    The Peanut Flooded Suction Sewage Pumping Stations are completely factory assembled, tested and delivered to the site location ready for installation. The standard equipment includes pumps, controls, lights, dehumidifier, heater, blower, sump pump, aluminum ladder, and ceiling mounted lifting eyes, The entrance tube cover features an automatic ...

    By USEMCO (Universal Sanitary Equipment Manufacturing Company) based in Tomah, WISCONSIN (USA). from Sewage Pump Stations Product line

  • Greyline - Model PSL 5.0 - Hybrid Pump Station Level Controller

    New Pump and Lift Station Level Controller: Ideal for sewage pump stations, lift stations, wet wells and tank level control with a non-contacting ultrasonic sensor mounted above the liquid. The new Greyline PSL 5.0 Level Controller has 6 independently programmable control relays for pump or valve control, level alarms, dialers, temperature alarm ...

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA). from Level Monitoring Instruments Product line

  • 7" 6" Below Ground Pump Stations

    Gorman-Rupp's 7' 6' (2.3 m) below ground stations, with their inconspicuous low-silhouette entrance tube, are widely used in residential areas. The fiberglass enclosure accommodates two pumps and two motors sized to meet your pumping requirements. The Gorman-Rupp self-priming pump stations require shallower burial than most other pump stations ...

    By Gorman-Rupp Co. based in Mansfield, OHIO (USA). from Packaged Pumping Systems and Lift Stations Product line

  • Vertical Pump Lift Stations (VPLS)

    Wastech's Vertical Pump Lift Stations (VPLS) are designed for transferring water, chemicals and wastewater when a gravity drain is not possible. Larger pump and tank sizes and custom configurations available.

    By Wastech Controls & Engineering, Inc. based in Chatsworth, CALIFORNIA (USA). from Pump Lift Stations Product line

  • PCS - Lift Station/Pump Station Package Systems

    Sewage lift/pump stations are used for pumping wastewater or sewage from a lower to higher elevation, particularly where the elevation of the source is not sufficient for gravity flow and/or when the use of gravity conveyance will result in excessive excavation and higher construction costs.

    By Pollution Control Systems, Inc. (PCS) based in Milford, OHIO (USA). from Other Product line

  • Grinder Pump Lift Stations

    Grinder pump lift stations are typically used for applications requiring high head pressure, and low flow. Grinder lift stations fit residential, commercial, and municipal installations.Triple D can design a grinder station with wet wells as small as 24' diameter x 36' deep, and as large as 12' diameter x 30' deep. Our grinder pumps have a ...

    By Triple D Pump Company, Inc based in Waco, TEXAS (USA).

  • Self Priming Pumps/Lift Stations

    The term self-priming pump describes a centrifugal pump that uses only it’s rotating assembly to reach a fully-primed pumping condition.A centrifugal pump is any pump that uses centrifugal force to create a pressure differential in a fluid, thus resulting in pumping action. Air is the main enemy of a standard (non-self-priming) centrifugal ...

    By Haynes Equipment Co Inc based in Olathe, KANSAS (USA). from Sewage Lift Stations Product line

  • HTT - Model 3100 - Larger Pump Stations or Small Treatment Plants

    The HTT-3100 is equipped for larger pump stations or small treatment plants. It is equipped with 28 discrete inputs, 6 analog inputs, 2 analog outputs, and 8 discrete outputs. The HTT-3100 also has a built-in power fail monitor and battery backup so that operators can be notified when power is lost and still monitor various alarms. The HTT-3100 ...

    By High Tide Technologies, LLC. based in Nashville, TENNESSEE (USA).

  • High Capacity Pump Lift Stations (HCPLS)

    Wastech's High Capacity Pump Lift Stations (HCPLS) are designed for transferring high volumes of water, chemicals and wastewater when a gravity drain is not possible. All HCPLS systems use thermoplastic vertical centrifugal pumps for corrosion resistance. Custom configurations and tank geometries are available, call or e-mail Sales.

    By Wastech Controls & Engineering, Inc. based in Chatsworth, CALIFORNIA (USA). from Pump Lift Stations Product line

  • Air Operated Pump Lift Stations (AOPLS)

    Wastech's Air Operated Pump Lift Stations (AOPLS) are designed for safely and efficiently transferring many liquids from wastewater to slurries when a gravity drain is not possible.

    By Wastech Controls & Engineering, Inc. based in Chatsworth, CALIFORNIA (USA). from Pump Lift Stations Product line

  • Non-Clog Pump Lift Stations

    Non-Clog lift stations are used when the customer has a need for higher flow, and has a lower head pressure. Many cities and municipalities use our non-clog lift stations, as they are far more cost effective than gravity sewer systems.Triple D can design a non-clog system from 12' diameter up to 30' deep. We can supply simplex, duplex, triplex and ...

    By Triple D Pump Company, Inc based in Waco, TEXAS (USA).

  • Geyser Hybrid Pump (GHP) - Low Cost, Low Energy for Pump Lift Stations

    The Geyser Ejection Pump has been developed to provide clog free intermittent pumping operation efficiently using less energy with easy control of the pumping rate.

    By Geyser Pump Tech, LLC based in Columbus, OHIO (USA).

  • Pump Commander - Lift Station Digital Level Controller

    Our Pump Commander digital level controller provides a very cost effective and simple to use means of controlling your pump station and it allows connection of our remote monitoring and control option.

    By California Motor Controls, Inc. based in Benicia, CALIFORNIA (USA). from Level Controllers Product line

  • Bullet BP-12 High Head Effluent Pump

    The Bullet Highhead Effluent Pump is a dependable submersible pump ideal for high pressure applications.

    By Septic Services, Inc. based in Union, MISSOURI (USA). from Lift Station Pumps Product line

  • Jensen Precast - Hatches & Covers

    Jensen MetalTech designs, engineers, and manufactures steel and aluminum access hatches, doors, covers, and grates for utility applications including: Electric Distribution & Transmission Pullbox, Manhole, Trench, & Vault Covers. Telecom & Fiber Optic Pullbox, Manhole, & Vault Covers. Water Meter Vault Access Covers. Pressure ...

    By Jensen Precast based in Sparks, NEVADA (USA). from Package Pump & Lift Stations Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you