Trough Liner (Lining Systems) Equipment
-
Manufactured by SPIRAC Pty. Ltd.based in AUSTRALIA
trough ...
-
Manufactured by Claro Incbased in CANADA
Claro shaftless spiral screws and trough liners are backed by over 25 years of research and applications experience. Whether for a new system or for a spare parts retrofit, Claro provides spiral configurations that maximize conveyor system performance and spiral life. Let us improve the performance of your current shaftless or shafted ...
-
Manufactured by Custom Conveyor Corporation (CCC)based in USA
Shaftless spiral conveyors eliminate the central shaft and allow a much higher fill rate resulting in lower rpm’s, more efficient conveying and consequently less wear. Without a shaft, no intermediate or end bearings are required. The trough liner is the spiral’s replaceable bearing surface. The only machined bearings in a ...
-
Manufactured by SPIRAC Pty. Ltd.based in AUSTRALIA
SPIRAC is the global leader in vertical sludge conveying with hundreds of SPIROLIFT installations worldwide. This proven technology offers significant cost and operational advantage over alternate methods of sludge elevation and transport. SPIROLIFT vertical conveyors feature an octagonal trough and liner. The breaks in the liner ...
-
Manufactured by Spaans Babcockbased in NETHERLANDS
of Archimedean Screw Pumps with a track-record of more than 30,000 screw pumps installed. Screw Pumps can be used for capacities from 15 litres/sec up to max 11 m3/sec and come in 3 basic forms: built in the traditional concrete trough, with steel trough liner and the prefabricated, ‘ready to install’ compact units. To learn more ...
-
Manufactured by Claro Incbased in CANADA
Claro aerated grit extraction spiral systems fully-automate the extraction of grit slurry from municipal aerated grit settling tanks. Consisting of a special alloy shaftless spiral, a trough, special low-friction liners, a proprietary liquid seal, a gear drive, and submersible electronic motion sensors, our grit extraction system is a ...
-
Manufactured by General Kinematicsbased in USA
The General Kinematics TRENCHVEYOR vibratory trench mounted conveyor is designed to reduce pit size and maintenance hassles. All machinery is located above the vibratory pan, with drive components mounted above the floor for easy ...
-
Distributed by TWD TradeWinds Incbased in USA
Comes with disposable polypropylene liners for multi-channel pipettors up to a 12-channel width. ChillTrough is designed to keep reagents cold at 32 - 40°F for up to 4 hours during sample ...
-
Manufactured by PRAB, Incbased in USA
Whether your needs are in-floor or above grade, press-mounted, or machine tool the PRAB Quick Return Conveyor (QR) will effectively move scrap away from your process, keeping your production ...
-
Manufactured by Claro Incbased in CANADA
Claro aerated grit extraction spiral systems fully-automate the extraction of grit slurry from municipal aerated grit settling tanks. Consisting of a special alloy shaftless spiral, a trough, special low-friction liners, a proprietary liquid seal, a gear drive, and submersible electronic motion sensors, our grit extraction system is a ...
-
Manufactured by Dutch Spiral B.V.based in NETHERLANDS
Spiral conveyors are developed and designed for efficient and effective transportation of a variety of materials such as wet, stringy or sticky materials. The main advantage of installing spiral conveyors is having maximum reliability and minimal ...
-
Manufactured by WAMGROUP S.p.A.based in ITALY
-resistant liner inside the conveyor trough housing. The U-troughs are manufactured in carbon steel or in 304 L / 316 L stainless steel, including an appropriate surface treatment. The lower part of the trough has an appropriate liner installed. At one trough end there is a standard bottom ...
-
Manufactured by Simeco Engineering srlbased in ITALY
The SP Shaftless screw compactor allows to combine three operations: draining, conveyng, compacting. The machine consists of three sections: the draining section, usually placed before the hopper where the majority of the water is discharged; the conveying section, that moves the material to the compacting/dewatering section, where both the volume and the weight reduction take place (up to 50%). ...
-
Manufactured by Simeco Engineering srlbased in ITALY
Shaftless screw conveyors consists of an Archimedean screw, without internal shaft, driven by a power transmission, rotating inside a trough carrying material loaded through one or more hoppers, to one or more exhaust ports, possibly equipped with shut-off sliding ...
-
Manufactured by Dutch Spiral B.V.based in NETHERLANDS
Spiral conveyors are developed and designed for efficient and effective transportation of a variety of materials such as wet, stringy or sticky materials. The main advantage of installing spiral conveyors is having maximum reliability and minimal maintenance. Spirals have no shaft and this prevents material built up. Our fully sealed lids minimize odour nuisance. Rotations of the spiral are kept ...
-
Manufactured by Simeco Engineering srlbased in ITALY
extracts the grits from the hopper's bottom, while the cleaned water outflow trough the outlet ...
-
Manufactured by Garland Manufacturing Companybased in USA
Gar-Dur UHMW applications for Wastewater Treatment Plant equipment. Primary and Secondary Sedimentation tanks, chain and flight ...
-
Manufactured by Diversified Plastics, Inc.based in USA
Drag Conveyors encompass a wide range of industries and applications from grain production to mining to food processing. Regardless, drag conveyor components must stand up to continuous movement, variable speeds and extreme wear. At Diversified Plastics, Inc. our manufacturing capabilities support a broad range of standard and custom plastic components for drag conveyors. Most important, the ...
-
Manufactured by VoR Environmentalbased in AUSTRALIA
MEVA shaftless screw conveyors are used for dust and odor free transport of numerous materials such as dewatered sludge, pulp, wood chips, sawdust, chemicals, slaughter-house refuse, garbage, scrap metal, pellet fuel etc. Because the spirals are shaftless, the conveyors are particularly suited for transporting materials which tend to jam, material containing particles of varied sizes which often ...
-
Manufactured by Action Vibratory Equipmentbased in USA
The ACTION team of skilled fabricators and professional staff is dedicated to the manufacture of meticulously crafted vibratory equipment of unsurpassed quality to help you become more productive and competitive. Common sense engineering solutions and unwavering equipment reliability ultimately lead to one thing: your complete confidence and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you