Lining Systems Services For Water And Wastewater Near Lithuania
-
based in GERMANY
Frisch & Faust uses various rehabilitation processes for repair and renovation of rainwater, soiled water and mixed water pipeline systems, as well as for manholes. The work is accomplished by especially trained employees of our rehabilitation department, and is an extremely economic and rapid solution in comparison to conventional open cut tunneling. Particularly in the inner-city area, the ...
-
Manufactured by Sensor, spol. s r.o.based in SLOVAKIA
SENSOR DDS MIT – Arc Tester ASTM Aproved. SENSOR DDS MIT technology was developed specifically for the quality control of exposed geomembrane liners such as synthetic membranes / liners, or ...
-
Manufactured by Subtech GmbHbased in GERMANY
The Janssen Point Repair is the only no-dig process to completely rebuild damaged pipe while remedying the source of pipe damage: faulty bedding and missing structural support. A remotely positioned packer pressure-injects a two-component polyurethane resin that penetrates pipe cracks, replaces missing wall pieces, and fills voids in the pipe bedding. The existing pipe is rebuilt without any ...
-
based in AUSTRIA
The punctual rehabilitation is a special kind of cured in place pipes (CIPP). The liner seals different damaged spots like rifts, untight sockets and holes and also stops each intrusion of infiltrating water reliably. Additionally, the procedure of punctual rehabilitation is the optimal solution to balance shifted pipes, or to close blind inflows.The glassfibre fleece saturated with resin is ...
-
Manufactured by HIGHBERG SOLUTIONbased in ROMANIA
The maintenance/ service and the cleaning of the tank provide a long sustainability of the tank and the liner regardless of its purpose. When it comes to cylindrical water galvanized storage tanks these services of maintenance and cleaning are ...
-
based in GERMANY
Sleeve lining is the most economical and technically durable answer to the problems in the main sewer, house connection and ground pipe.Our sleeve lining is based on a liner made of polyester needled felt / glass fibre impregnated with synthetic resin and is used in the nominal diameter range from DN 100 to DN 1200.Epoxy resins, UP resins and vinyl ester resins are used depending on the ...
-
Manufactured by CeTeau B.V.based in NETHERLANDS
CeTeau provides tailor made solutions for erosion protection, water ponds, landfills and biogas. Our geomembranes and geosynthetic clay liners (GCL) are widely used for solid, liquid and gas ...
-
Manufactured by FUCHS Fertigteilwerke Süd GmbHbased in GERMANY
FUCHS Fertigteilwerke is one of the largest maintenance providers for wastewater treatment plants and separators in Germany. Amongst others, we build and service plants for Aral, BP, Daimler and BMW. In addition to manufacturing separators, wastewater treatment and pumping chamber systems, we offer complete maintenance and service. We service all types of wastewater, separator and used water ...
-
Manufactured by Inpipe Sweden ABbased in SWEDEN
Would you like to work efficiently and safely? Efficiency and safety were two important criteria when we developed the technique for inverting our fibreglass-reinforced liners. The inversion method requires minimal personal resources compared with other installation techniques and improves personal safety and work environment by minimising the need to work down narrow ...
-
Manufactured by Inpipe Sweden ABbased in SWEDEN
We have a unique winch-in-place technique.Would you like to work efficiently and safely? Winch-in-place is a tried and tested liner insertion technique. Inpipe’s installation equipment – which is essentially the same as for inversion – reduces the need to work down in the wastewater drain. It increases safety and the work environment for the installers compared with many other ...
-
Manufactured by SC GenMod Serv Srlbased in ROMANIA
Technological progress today offers leak proofing solutions applicable to any type of water storage tanks using EPDM or Butyl geo-membrane. Both synthetic materials have very good and similar specifications in terms of flexibility, being the ideal product for such applications. Butyl rubber and EPDM provide a perfect seal. Their thight molecular structure offers a high resistance even to vapor ...
-
Manufactured by Pontarolo Engineering S.p.A.based in ITALY
CUPOLEX provides cost-effective water tanks and Stormwater Management solutions to engineers, developers and municipalities that are customized for their site-specific needs. Applications include slowing or reducing volume from your project site, protecting waterways and maintaining stormwater quality, or storing water in tanks for harvesting or reuse. CUPOLEX® stormwater management systems ...
-
based in NETHERLANDS
A landfill site that is full, or that is no longer in use, can be capped so that the waste is stored safely. The best choice for capping the site varies for each site. It depends on the risks, the applicable regulations in the country concerned and the available budget. Afvalzorg has years of experience assessing risks, selecting appropriate capping methods and installing bottom liners on ...
-
based in UNITED KINGDOM
There are a multitude of applications for GT's lining systems within the Civil Engineering and Construction Industries. From the sealing and capping of contaminated ground to the waterproofing of attenuation tanks, GT's range of geomembranes and geotextiles provide a cost-effective and assured method of creating impermeable barriers. This section details the substantial experience of GT and the ...
-
based in UNITED KINGDOM
Water is a most precious resource. Increasingly, to meet irrigation requirements, storage reservoirs are recognised as the key to water self-sufficiency. The management of waste liquids and effluents is subject to stringent legal requirements meaning that lagoons and ponds are required to avoid discharge into rivers and other watercourses prior to ...
-
based in UNITED KINGDOM
From small ponds to substantial lakes, synthetic sheet liners provide a cost effective and assured method of lining manmade water areas. GT is a specialist contractor in the design, supply and installation of liners. The company's experience and knowledge has been built over many years earning us the reputation of market leader. For certain straightforward projects, from 20 square metres to 1,000 ...
-
Manufactured by Butek Landlinebased in UNITED KINGDOM
Butyl Rubber is the original geomembrane liner suitable for water, water soluble chemicals and some acids. High elongation at yield makes it suitable for applications where movement or settlement is possible, and its flexibility makes it ideal for confined space applications. This material is also suitable for use in low temperature applications to ...
-
by Ecologiabased in UNITED KINGDOM
Rotary Drilling is the backbone technique of intrusive SI work, the extractive minerals industry and civil ...
-
based in USA
Artificial Ponds are often lined with a clay or poly liner. This liner may be damaged due to tree roots, machinery, accidents, or improper installation, resulting in infiltration of the ponds contents into the ground around and beneath the pond. A cofferdam is needed, to isolate a work area around the damaged liner. The cofferdam must not result in a lot of dirt left in the pond at the end of the ...
-
based in UNITED KINGDOM
From time to time we have had calls from clients that have had drains relined which have been installed badly and have deformed causing blockages or have cured before the liner was inflated fully. We have the ability to re open liners and install a new structural liner inside the original or in some cases by removing the old liner ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you