Only show results available in Virginia? Ok

Liquid Level Monitoring Applications

  • Premium

    Water treatment solutions for paper and pulp industry

    Partner to the paper industry. ProMinent provides reliable metering components and systems for the production of paper, rounded off by the application knowledge of ProMinent engineers.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Online monitoring solutions for the drinking water industries

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards. On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Water Treatment Solutions for Turbidity Removal

    Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a turnover of those levels, bringing sediment, plants, and algae to the top.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Liquid Level Contents Gauges -

    Gauges for the Ship Building & Offshore Industries We have the following Liquid Level Contents Gauges For Ship Building & Offshore use, the G35 and G31 models meet the requirements for SOLAS for use with flammable liquids, they are type approved by Lloyds, DNV and Rina amongst others. G35 Seemag- Magnetic Gauge: Approved for use on flamable Liquids G31 Seeflex - Reflex Gauge : Approved for use on flamable Liquids G21 Marine - Tubular gauge G20 Admiralty - Tubular gauge G22 Quickmount -Tubular gauge G34 Quickflex - Reflex Gauge - We have a new brochure detailing our range of products for the marine & shipbuilding industry. View/Download this brochure: http://www.seetru.com/datasheets/gauges/Seetru_Marine_Gauge_Brochure.pdf

    By Seetru Limited based in Bristol, UNITED KINGDOM.

  • Measurement and control systems for the Indicating the level - mechanically

    Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring station because of their special design and the intense LED illumination. With indirect level gauges, the water level is transmitted by a magnetic system to a display panel on the outside of a pipe.

    By IGEMA GmbH based in Münster, GERMANY.

  • Liquid Chromatography for soil consultancy

    Everyone has a responsibility to care for the environment to reduce the levels of pollution, including businesses that daily release emissions into the air and the ground. This is why we provide a full-service environmental testing service to help businesses identify problems and resolve them so they operate in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all sizes.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Pulsair`s industrial mixers for blending & mixing additives

    Industrial additive mixing and blending equipment from Pulsair Systems. Pulsair industrial additives mixing systems are designed to efficiently mix and blend additives with base liquid products yielding faster blending times and a more homogenous solution at a much lower cost than traditional mixing systems. Pulsair mixing systems support many industries that require mixing additives such as lubricants, food processing, chemicals, paints and more. Our non-shear industrial additive mixing systems are highly energy efficient, easy to use and maintain, cost-effective and well suited for any base product and oil, food and chemical additive mixture. The Pulsair mixing process can efficiently mix in any size and number of tanks.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Measurement solution for CO2 capture by anime absorption

    The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Combined photo-radiometric probe for Museum & Metal Industry

    The combined photo-radiometric probe LP471P-A measures the two parameters of principal interest in the field of lighting, namely the ILLUMINATION (lux) and UVA IRRADIANCE (W/m2). The probe is composed by a luxmeter and an UVA radiometer. The signals of the two sensors are read and processed at the same time to visualize the relation between the two quantities expressed in µW/lumen. The two sensors are equipped with a diffuser for the correct measure according to the cosine law. The probe LP471P-A is particularly useful when the simultaneous measurement of illuminance and UVA irradiance is required. For example, in museum environment when it is necessary to evaluate the UVA radiation level in the lamps in order to avoid damage to paintings or wood or any other historical art objects(CIE 157) and another area of interest is the Non Destructive Testing (NDT) that employ penetrating liquids, used primarily in the fields of mechanics and aerospace(ISO 3059:2001)

    By Delta OHM S.r.L. based in Caselle di Selvazzano, ITALY.

  • Environmental monitoring solutions for the industrial sites industry

    Industrial facilities, Superfund sites and other remediation sites. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection systems. Customer service and support includes the industry`s largest in-house engineering staff and a worldwide network of trained, equipped local representatives.

    By QED Environmental Systems, Inc. - A Graco Company based in Dexter, MICHIGAN (USA).

  • Wet gas monitoring for refineries

    Thermal mass flow meters provide excellent measurement capabilities in dry gas flows. They have proven durability, accuracy, and repeatability. However, thermal flow meters are sensitive to liquid droplets in a wet gas stream. For a thermal flow meter to work accurately in a condensing gas environment, the probe must be placed far enough downstream so that the entrained water has condensed onto the pipe wall. In a very wet environment, any condensing liquid (commonly referred to as mist or fog) contacting the sensor probes causes a high reading due to the liquid vaporizing on the heated portion of the sensor. As a result of this deficiency, measurements with conventional thermal meters are largely ignored when moisture levels rise because there is no confidence that the measurements are true.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Measurement solution for CO2 capture by amine absorption

    The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the CO2 emitted from the power station and so has a real benefit for the environment. Having said this, care needs to be taken to ensure that amine emissions themselves are monitored, managed and prove no extra damage to the environment. Research is on-going to develop new amines or mixtures of amines to reduce emissions. The most common absorber in use in today’s first generation of industrial pilot plants is Monoethanolamine (MEA).

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Gas detection for the winery and brewery Industry

    Once an archetypal example of manual production, the winery and brewery industries now incorporate sophisticated processes to ensure high quality levels and efficient output. In some cases traditional approaches have simply been scaled up or put under more stringent monitoring, whilst in others innovations such as nitrogen-pressurised canning have been introduced. However, whichever approach has been followed there is also a growing realisation of the gas hazards that are associated with both new and old processes, and the need to protect workers from toxic gas exposure and asphyxiation risks.

    By Crowcon Detection Instruments Ltd - a Halma company based in Milton Park, UNITED KINGDOM.

  • Chlorine Level Measure Meter

    External Liquid Level Gauge for Chlorine tank measure / no need drilling the tank. Non intrusive Measure range: 20M Power supply: DC 24V Accuracy: 0.1% Power: 10W Signal output: 4-20mA Communication Protocols: RS-485 HART MODBUS Environment temperature: -20-70 degree Liquid temperature: -50-100 degree Explosion proof class: ExdIICT6 Protection class: IP67 www.sx-sk.com Jilina Lee Skype: jilina1986 jilina@sx-sk.com Cell: 0086 15809274235 Sonar Technology, External liquid indicator uses the principle of sonar ranging collecting the sonar signal by the special probe fixed outer wall of the tank. Pioneering the Two-Wire System, Overcoming various technical dilemmas, two-wire system External liquid level indicator has been successfully developed. Easily Installation Trial run and Maintenance, No effect on production, No need clean the tank when installing, trial running and Maintaining. Auto-diagnosed and collation, Accuracy is 0.1%

  • Oil Mist Seperator for Building Construction

    Contec oil mist separators ensures the façade design of ETFE cushions for efficient and environmentally friendly glare-, heat- and UV-protection. Contec GmbH, Bad Honnef is a leading manufacturer of filtration systems, oil mist separators and liquid level measuring technology. The use of the Contec oil mist separator (COMS) in the field of building construction is definitely very innovative and our system has proven again its advantages in environmental aspects.

    By contec GmbH Industrieausrüstungen based in Bad Honnef, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you