Liquid Separation Applications available in Nova Scotia
-
Premium
Machineries for beverage container recycling
Every beverage bottling facility requires a cost efficient, clean method for the disposition of out of date or out of spec products. Shred-Tech® has been providing solutions to suit this need for many years. All shapes and sizes of cans, plastic bottles and aseptic packaging have been processed using our ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Centrifuges for chemicals, biotechnology, pharmaceuticals and food industries
In the areas of chemicals, pharmaceuticals and foodstuffs, there are numerous possible applications for Flottweg Tricanter, Sedicanter and Sorticanter machines as well as decanters, belt presses and separators: Manufacturing lactose and casein in the dairy industry, separating plastics - plastics recycling, algae harvest, manufacturing soya milk and soya proteins, drying okara, manufacturing wheat starch, dewatering PVC, dewatering suspension ...
By Flottweg SE based in Vilsbiburg, GERMANY.
-
Premium
Water treatment solutions for municipal wastewater treatment industry
Liquid Solid separation-coagulants and flocculent, Dewatering, Struvite /Vivianite control and removal, Metal Removal-Copper Removal, Potable water reuse. ...
By Jenfitch INC. based in Walnut Creek, CALIFORNIA (USA).
-
Liquid/solid separation equipment for man camp
Many times mining, oil and gas exploration, construction, and other activities take place in remote areas of the world. In these cases it is necessary to provide both potable water and treatment of sanitary wastes for the facility. In addition, many of these activities take place in temporary fashion as the sites will either be developed or abandoned at a future ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
-
Liquid/solid separation equipment for paste thickening and backfill
Mine backfill is defined as the material used to fill the cavities (i.e., stopes) created by underground mining. Backfilling can be a means to dispose of sludge and/or tailings which may contain hazardous materials and to reduce surface environmental impacts by storing tailings underground. Alternately, backfilling with nonhazardous materials can allow for mining productivity improvements. To these materials are added a variety of fillers such as fly ash, course sand, or gravels along with a binder, such as ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
-
Industrial solutions for pulp and paper industry
Sedimentation, flotation, mixing, pulp separation and chemical recovery systems are among the myriad of process equipment WesTech supplies to the pulp and paper industry. Customized to the unique needs of operating plants, WesTech liquid/solids and liquid/liquid separation expertise is built upon years of working with plant operators and owners. The result is a working relationship and reliable ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
-
Separation solutions for oil & gas industry
Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering ...
By Elgin Separation Solutions based in Stafford, TEXAS (USA).
-
Fluid temperature control and separation solutions for oil and gas applications
As the oil and gas sector moves towards a more sustainable, environmentally improved operating model a key success factor rests within supply chain, who you choose to partner with will determine how successful the move ...
By Osso Ltd based in Aberdeen, UNITED KINGDOM.
-
Fluid temperature control and separation solutions for decommissioning applications
Providing support to the end. At OSSO we understand the need to be regulatory compliant and wherever possible minimise the environmental impact decommissioning can cause whilst simultaneously keeping operational costs to a minimum. ...
By Osso Ltd based in Aberdeen, UNITED KINGDOM.
-
High Performance Solid-liquid Separation System for Deepwell Industry
Deepwell facilities for the disposal of plant waste streams often employ nominally rated spray spun elements, bags, diatomaceous earth filters, and various other types of conventional filtration technology. These labor intensive systems provide protection of the well from occlusion by suspended particle matter, albeit often with high operational cost and limited assurance of reliable fluid quality. The ongoing challenge facing a deepwell system is the requirement that the formation into which the waste is being ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for purify benzene, toluene, and xylene (BTX)
Purify benzene, toluene, and xylene (BTX) from refinery or petrochemical aromatics streams such as catalytic reformate or pyrolysis gasoline. This liquid-liquid extraction processes offers lower capital and operating costs, simplicity of operation, range of feedstock, and solvent ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for caustic treating industry
The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for coating industry
Reactor products can contain gelatinous, deformable solids form in coating formulation. Batch Process: Limited reactor turn-over (constrained through-put) due to long filtration process. Reduce operating costs and batch cycle time, double capacity and increase online ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
High performance separation system for silicones industry
Silicones are inert, synthetic compounds with a variety of forms and uses. Typically heat-resistant and rubber-like, they are used in sealants, adhesives, lubricants, medical applications, cookware, and insulation. Silicones are polymers that include silicon together with carbon, hydrogen, oxygen, and sometimes other chemical elements. Some common forms include silicone oil, silicone grease, silicone rubber, and silicone ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
Liquid/solid separation solutions for the municipal landfill leachate
A customer in the municipal solid waste industry needed a solid/liquid separation process as a component of a system solution for disposal of leachate water. At Heron Innovators, we specialize in Suspended Air Flotation systems for wastewater applications, and were contracted to manufacture and install a skid-mounted system to remove flocculated solids prior to disposal in a drainfield. The process incorporated lime softening to remove calcium, a major contributor to TDS, from the leachate wastestream, reducing ...
By Heron Innovators based in Rocklin, CALIFORNIA (USA).
-
Metal recycling equipment for Aluminum processing industry
Jiangyin Hydraulic devoted to offer solution for the biggest apple aluminium products manufacturer, FOxcnn for over 8 years. And designed various systems to help collect every drop of values from Aluminium wastes. In 2016 ,Jiangyin Hydraulic built another production line with functions of waste lifting, crushing, spin-drying, briqutting,liquid collecting system and win Foxcnn’s another admiration. We design and build this system in only 55 days and make the system fully integrated into a 4mx5m area ...
By Jiangyin Metallurgy Hydraulic Machinery Factory based in Jiangyin City, CHINA.
-
Liquid/solid separation equipments for industrial applications
WesTech offers you a comprehensive line of process equipment in the industrial market. Your project will be supported by a reliable engineering team with extensive experience in all types of industrial ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
-
High performance separation system for sour water
Hydrocarbons in the sour water system are typically present on a continuous basis at up to 10,000 ppm and during upsets to levels greater than 50,000 ppm. As little as 5,000 ppm Cat Naphtha lost to the sour water system from an FCC main fractionator overhead accumulator operating at 100 gpm water represents 262,800 gallons of potential product gasoline lost per year, with a recoverable product value greater than ...
By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).
-
SSI builds shredding systems for alternative fuels processing
SSI designs and manufactures size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuels. SSI Shredding Systems, Inc. has been developing and refining a wide range of products and engineered system solutions to convert waste materials into usable fuels for industry. SSI has the experience, product range and desire to exceed your ...
By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).
-
Liquid/solid separation equipment for coal mining and preparation
Coal Preparation Circuit: Three quarters of American coal is mined east of the Mississippi River. Half of this is “prepared” coal. Coal preparation offers a number of commercial and environmental benefits. These include increased quality and commercial value of saleable coal by achieving 75-80% ash reduction and 15-80% trace element reduction. Cleaned coal reduces transportation costs as well as reduced quantities of combustion ash requiring disposal. Coal preparation can also make marginal coal ...
By WesTech Engineering, LLC based in Salt Lake City, UTAH (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you