marine wastewater (Marine Wastewater - Water and Wastewater) ...

Showcase

SpinPro - Turbidity Silt Curtains for Dredging and Wastewater Ponds

, Marine Construction, Wastewater Ponds, Lagoons, and Rivers to name a few. Material of construction ranges from PVC for oil booms to woven and non woven geotextile fabrics with varying degrees of filtration based on flow rates and turbidity ...

By Spinpro based in Bellingham, WASHINGTON (USA). from Dewatering Tubes Product line

S-KIM - Marine Wastewater Treatment Plant

The installation of waste water treatment systems on merchant ships, canal boats and naval vessels is a special challenge because strongly varying loads (e.g. due to changing numbers of passengers and crews) have to be considered. Moreover, for ecological reasons it is not allowed to use large-volume collecting tanks for the waste water ...

By enviplan Ingenieurgesellschaft mbH based in Lichtenau.Henglarn, GERMANY.

Premium

SaturnSub - Submersible Pumps for Abrasive Liquids

, wastewater treatment, seawater ...

By Argal Pumps based in Brescia, ITALY. from Centrifugal Pumps - SATURNsub Product line

Premium

Proco - Pipe Penetration Seals

The Proco Pen-Seal is designed to provide a gas and water-tight seal. All sizes have been tested to withstand a hydrostatic seal up to 20 psig or 40 feet of head pressure, in addition to withstanding temperatures up to 250 °F. The Pen-Seal’s standard elastomer material is EPDM, but a Nitrile material is available if the seal may come in contact with hydrocarbons, oil, gas, jet fuel, or ...

By Proco Products, Inc. based in Stockton, CALIFORNIA (USA). from Expansion Joints - Pen-Seal Product line

Premium

MarineFAST - Model BMS - BioSolids Management System

A certified MarineFAST unit will meet the current minimum requirements of the MEPC.159(55) type certification. It can also be equipped with long term sludge storage. The MarineFAST Biosolids Management System will provide that additional storage capability. Designed as a secondary system after a MarineFAST, it allows for longer sludge storage on board the ...

By BioMicrobics, Inc. based in Lenexa, KANSAS (USA). from Marine Solutions Product line

Premium

SATURNevo - Model ZGS - 50 Hz - Centrifugal Pump for Fluoridric Liquids

Integrally produced by Argal in its plant located in Italy, they are created by RTM injection moulding technology: parts are manufactured laying long-strand fiberglass mat in moulds before injecting the resin. The use of fiberglass mat of different weight, texture orientation and numbers, reinforces the structure of the pump in the most mechanically solicited areas and at the same time offers ...

By Argal Pumps based in Brescia, ITALY. from Centrifugal Pumps - SATURNevo (ZGS - ZMS - ZCS) Product line

Premium

SATURNsub - Submersible Pumps for ATEX Areas

, wastewater treatment, seawater ...

By Argal Pumps based in Brescia, ITALY. from Centrifugal Pumps - SATURNsub Product line

Premium

SATURNevo - Model ZGS - 50 Hz - Centrifugal Pump for Abrasive Liquids

Integrally produced by Argal in its plant located in Italy, they are created by RTM injection moulding technology: parts are manufactured laying long-strand fiberglass mat in moulds before injecting the resin. The use of fiberglass mat of different weight, texture orientation and numbers, reinforces the structure of the pump in the most mechanically solicited areas and at the same time offers ...

By Argal Pumps based in Brescia, ITALY. from Centrifugal Pumps - SATURNevo (ZGS - ZMS - ZCS) Product line

Premium

SATURNsub - Centrifugal Pump for Bleaches Applications

, wastewater treatment, seawater ...

By Argal Pumps based in Brescia, ITALY. from Centrifugal Pumps - SATURNsub Product line

Premium

SATURNsub - Centrifugal Pump for Fluoridric Liquids

, wastewater treatment, seawater ...

By Argal Pumps based in Brescia, ITALY. from Centrifugal Pumps - SATURNsub Product line

Premium

SATURNevo - Model ZGS - 50 Hz - Centrifugal Pump for ATEX Areas

Integrally produced by Argal in its plant located in Italy, they are created by RTM injection moulding technology: parts are manufactured laying long-strand fiberglass mat in moulds before injecting the resin. The use of fiberglass mat of different weight, texture orientation and numbers, reinforces the structure of the pump in the most mechanically solicited areas and at the same time offers ...

By Argal Pumps based in Brescia, ITALY. from Centrifugal Pumps - SATURNevo (ZGS - ZMS - ZCS) Product line

Premium

PHILOS - Model Megaflux-CUF - Compact & Integrated UF Module Skid

PHILOS Megaflux-CUF stands for compact UF Filters. It is a new concept of DIY assembly method, whose easy to build feature helps assemble the UF-Skids directly on site with simple tools. The Megaflux-CUF module has a pipework, which connects the module to form a single UF Block, making it easy to build UF Skid Block without a series of manufacturing processes such as steel structure foundation ...

By PHILOS Co. Ltd. based in Gwangmyeong-si, SOUTH KOREA. from Membrane & Filter - Water Product line

Premium

SATURNevo - Model ZGS - 50 Hz - Centrifugal Pump for Chlorine

Integrally produced by Argal in its plant located in Italy, they are created by RTM injection moulding technology: parts are manufactured laying long-strand fiberglass mat in moulds before injecting the resin. The use of fiberglass mat of different weight, texture orientation and numbers, reinforces the structure of the pump in the most mechanically solicited areas and at the same time offers ...

By Argal Pumps based in Brescia, ITALY. from Centrifugal Pumps - SATURNevo (ZGS - ZMS - ZCS) Product line

RT-Solutions - Model RT Pure-M - Marine Sewage Treatment Plant

RT PURE-M, a multi-functional, bio-friendly marine wastewater treatment system generates sodium hypochlorite with mixed radicals - a safe, reliable and secure solution for NEUTRALIZATION OF VARIOUS CONTAMINATING SPECIES in marine waste ...

By RT Solutions Pte Ltd based in Singapore, SINGAPORE. from Sewage Treatment Product line

Stocked & Fabricated Grating

Environmental Composites, Inc. inventories a variety of fiberglass, steel and aluminum grating products for stormwater, wastewater, and marine applications. ECI has the capabilities for fabricating these products to your particular engineered ...

By Environmental Composites Inc. based in Tavares, FLORIDA (USA).

SkimOil - Model MarineVAP™ - Marine Water Evaporator

79 feet long are mandated to have NPDES permits for managing all waste waters generated on board. With more “no discharge zones” being designated throughout the inland and coastal waters, the pressure is on boat operators to better manage marine ...

By SkimOil LLC based in Hudson, OHIO (USA). from Marine Equipments Product line

Thern Captain 4000 - Model 5FT40 - Stationary Davit Crane

Designed for permanent installation and smooth rotation, the Captain 4000 stationary davit crane can handle heavy loads up to 5,500 pounds (2,500 kg) and features an extended reach of 10 feet, as well as a maximum hook height of 12 feet. This crane is perfect for wind energy, marine, construction, ...

By Thern Inc based in Winona, MINNESOTA (USA).

NARO Water Solutions - Model Industrial Wastewater Treatment - Industrial Wastewater Treatment

, or to a marine environment. Wastewaters generated from different industries have distinctive characteristics, that set it apart from common municipal wastewater. The complete process solution is being designed, engineered and assembled, based on feed effluent characteristics, required outlet qualities and capacity. ...

By NARO Water Solutions based in Dubai, UNITED ARAB EMIRATES.

WRI - Model AquaTex™ SBR - Sequence Batch Reactor

Aqua Tex™ SBR (Sequence Batch Reactor) has been successfully used to treat municipal, marine and industrial wastewaters. The Sequencing Batch Reactor (SBR) is an activated sludge process designed to operate under non-steady state conditions. It is uniquely suited for treatment applications characterized by ...

By Wastewater Resources Inc. (WRI) based in Scottsdale,, ARIZONA (USA). from Industrial Product Product line

SaniLIFT - Small Diameter Lift Stations

“SaniLIFT are small diameter lift stations in stock and engineered to match your system. Custom built systems available, with many options, such as grinder pumps.” SaniLIFT lift stations are designed to move wastewater in marine applications from lower to higher elevation, particularly where the ...

By Scienco/FAST - a subsidiary of BioMicrobics, Inc. based in Sunset Hills (St. Louis), MISSOURI (USA).