Mechanical Water Filtration Equipment For Water And Wastewater Available In Fiji
-
Manufactured by Apex Fluid Engineering Ltd.based in UNITED KINGDOM
Large end suction range with flange sizes from 200mm(8″) to 450mm(18″) and flows up to 3000 m3/hr and head up to 180m. Efficient design with various seal arrangements available. Suited for applications where a split case HS pump is not required. Smaller sizes available in a close coupled ...
-
Manufactured by Chromatic Industries, Inc.based in USA
The HCV is Chromatic flagship valve and has been servicing applications across market sectors since it’s introduction into the North American energy industry. As the OEM designer and manufacturer of the HCV, Chromatic is committed to the design, manufacture and distribution of valves that simplify your operations and reduce ...
-
Manufactured by Finder Pompe S.r.l.based in ITALY
Radially split centrifugal pumps with close impeller complying with ISO 2858/DIN 24256/ISO 5199 Norms. A sturdy and deep stuffing box allows to fit single or double, either conventional or cartridge design mechanical seals. Upon request, they can be equipped with heating/cooling chambers on the pump casing and/or stuffing box. HC Pumps can be manufactured in any material combination depending on ...
-
Manufactured by Apex Fluid Engineering Ltd.based in UNITED KINGDOM
Single Stage Axially Split Case Pumps with double entry impeller, 150mm(2||) to 400mm(16||) discharge. Designed and developed specifically for the varying applications and continuous operation demands of industry. Also available in high pressure and compact variants ...
-
Manufactured by Gorman-Rupp Co.based in USA
Designed for economical, trouble-free operation, the superior solids-handling capabilities of Super T Series® pumps make them ideally suited for a variety of applications including solids-laden liquids and slurries. The large volute design allows automatic repriming in a completely open system without the need for suction or discharge check ...
-
Manufactured by GKD - Gebr. Kufferath AGbased in GERMANY
Filtration meshes with 5-heddle atlas weave combine high flow rates with mechanical stability. With their smooth top surface, these further improved wire meshes/metal fabrics ensure a particularly even layer formation of the filter cake. The filter cake is also easy to remove. The surface of the mesh body is rough on the back. Thanks to the special weave, filter media can be very effectively ...
-
Manufactured by Finder Pompe S.r.l.based in ITALY
The HPP pumps are designed and manufactured according to API 610, 11th edition and are suitable for heavy duty applications in the oil and gas, refining and petrochemical industry. Designed to run at 50 or 60 Hz., with temperatures ranging from -100°C to +400°C, these pumps provide very high reliability, high interchangeability, easy accessibility to the inner parts and minimum ...
-
Manufactured by Auro Pumps Pvt Ltdbased in INDIA
Manufacturing experience of more than 30 yrs and have manufactured and installed more than 1 lakh pump sets PAN India and abroad. ...
-
Manufactured by Yalan Seal Ltdbased in CHINA
Industrial Standards: Specifically Customized Scopes of Application: widely used in Roots blowers and other types of blowers. Operation Parameters: Pressure: 0.1 MPa to 0.8 MPa Temperature: - 20 ºC to 180 ºC Linear Speed: 15 m/s or less Materials: Rotary Ring Face: Carbon/SiC/TC Stationary Ring Face: Carbon/SiC/TC Elastomers: NBR/FKM/PTFE/FFKM Springs: SS304/SS316L/HC-276 Metal Parts: ...
-
Manufactured by AKAL Engineering & Machinery Incbased in TURKEY
High flow rates, such as those occurring in large sewers and at the inlets of sewage treatment plants, can only be controlled with suitably large but efficient grinders. The double spindle grinding machine XRipper XRG has been specially developed for these applications. High Capacity Units have screens positioned laterally within the enclosure, trapping and holding back contaminants and waste ...
-
Manufactured by Yalan Seal Ltdbased in CHINA
Industrial Standards: ISO3069, DZN24960, GB6556 Scopes of Application: widely used in power plant flue gas desulfurization, salt chemical engineering, paper making, and water treatment. It is specifically designed for desulphurization pumps, salt slurry pumps, and paper pulp pumps. Operation Parameters: Pressure: 0 ~ 1.5 MPa or less Temperature: - 20 ~ 130 ºC Linear Speed: 10 m/s or less Solid ...
-
Manufactured by AKAL Engineering & Machinery Incbased in TURKEY
The RCX series cutters represent a logical further development of the wet cutter RotaCut. For flow rates of up to 1200 m³/h, they epitomize cost-effective cutting for demanding applications in tight spaces. RCX types feature extremely robust motors as well as a robust and robust design that allows use on the discharge side up to 6 bar. A completely new concept has been developed for good ...
-
Manufactured by Depacbased in LIECHTENSTEIN
DEPAC has four optimised mechanical seals for the challenging boundary conditions of an agitator. The advantage: the flange and face parts as well as certain seal housing parts are exchangeable. The operator's stock can thus be kept to a low level and a wide range of replacement parts is ...
-
Manufactured by Yalan Seal Ltdbased in CHINA
Industrial Standards: API610 Scopes of Application: widely used in water treatment, power plants, metal processing, pharmacy, chemical fertilizer industry, and food production. Designed for water pumps, sewage pumps, chemical pumps, double suction pumps, paper pulp pumps and other rotary devices. This seal component is suitable for replacing gland packing. Operation Parameters: Pressure: 2 - ...
-
Manufactured by Johnson Pump - an SPX Brandbased in SWEDEN
TopGear G-series is available in cast iron with inline port connections. Baseplate-mounted. Heating and cooling jackets are available for pump cover and around shaft seal. Built-on single or double safety relief valves are ...
-
Manufactured by Hunan Credo Pump Co.,Ltdbased in CHINA
VCP series pumps are vertical trubine pumps, single-stage or multi-stage, adaptable for wide range of water supplies and various water levels. Installed above or below ground discharge, with motor drive, diesel engine, or steam ...
-
Manufactured by Chromatic Industries, Inc.based in USA
The Chromatic DOV valve (Double Offset Valve) extends the technology of the HCV and delivers a rotary valve with dual mechanical wedge seals. The DOV maintains the unique top entry cartridge style for easier maintenance and fewer leak paths and the quarter-turn operation that allows for more cost effective actuation and lower fugitive ...
-
Manufactured by Apex Fluid Engineering Ltd.based in UNITED KINGDOM
Apex API range of heavy duty pumps, conforming to API 610 12th edition standard. Designed for the most onerous duties handling hydro carbons and chemicals at high temperatures and pressures. Pumps are of modular construction and are available in a wide variety of materials including steel, stainless steel, duplex stainless steel and ...
-
Manufactured by Aessealbased in UNITED KINGDOM
The AGCS™ and AGCD™ seals are designed to fit the full six bearing frame range of the AhlstarUP pump models. AESSEAL® is believed to be the only seal manufacturer to offer a fully integrated and glandless cartridge mechanical seal range for these pumps, which were launched by Sulzer in 2006 with a view to superseding the APP and APT ranges. ...
-
Manufactured by MZT Pumpibased in MACEDONIA
Screw – spindle pumps belong into the group of volumetric pumps. The main working elements of the pump are three screw (helical) spindles (with special profile) and sleeve (casing). Screw spindle pumps can be compared with gear that have big screw length of his teeth or with piston pump which indefinite number of pistons. Pumps are made in horizontal and vertical accomplishment with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you