Membrane Aeration Equipment For Water And Wastewater Near Virginia
-
Manufactured by Entex Technologies Inc.based in USA
Lagoons are pond-like treatment systems designed to receive, hold, and treat wastewater for a pre-determined period of time. They are often lined with clay or an artificial liner to prevent leaks to the groundwater below. Many plants are built with aerated lagoons because it is a relatively low-cost option which requires minimal maintenance. Unfortunately, Lagoons have historically offered very ...
-
Manufactured by Huber SEbased in GERMANY
The HUBER VRM® process is a system of ultrafiltration membranes submerged within the aeration tank. The resultant high effluent quality meets the most stringent regulations whilst also allowing for the capacity to meet the increasing and higher disposal legislation anticipated in the future, with optimised investment and operating ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
The INVENT Coarse Bubble Aeration system (iCBA) has been developed and optimised for special applications in industrial and municipal wastewater treatment plants. It provides oxygen supply and optimal mixing during the biological phase, in particular for use in processes that use carrier media for biomass detention, whether moving-bed or fixed-bed ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
Efficient and reliable mixing and aeration for lagoon wwtps. For the important task of mixing and aeration in aerated lagoon treatment plants the engineer or operator had only two options until today: He could either use surface aerators or floating membrane aerators. While the surface aerators usually do not provide economical oxygen transfer performance and insufficient mixing, the floating ...
-
Manufactured by Smith & Loveless Inc.based in USA
Engineered and pre-assembled in S&L’s quality-controlled factory, the TITAN MBR MEM-FRAME™ is a wastewater treatment system that is designed for insertion into any concrete aeration basin. Containing robust, flat-plate TITAN MBR™ Membranes, the MEM-FRAME™ maintains high permeability and consistent flux. The frame is fixed to the tank and the membrane modules can be ...
-
Manufactured by SFA enviro - Europelec - Aquaturbobased in FRANCE
This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Lower energy costs, increase productivity, and lower your footprint with our latest Membrane Bioreactor (MBR). LEAPmbr* builds on 25 years of membrane bioreactor experience to deliver the most advanced MBR solution to date. It dramatically lowers energy costs, increases productivity, and offers a flexible design that can fit within a smaller footprint than conventional MBR technology. See how ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Lower energy costs, increase productivity, and lower your footprint with our latest Membrane Bioreactor (MBR). LEAPmbr* builds on 25 years of membrane bioreactor experience to deliver the most advanced MBR solution to date. It dramatically lowers energy costs, increases productivity, and offers a flexible design that can fit within a smaller footprint than conventional MBR technology. See how ...
-
Manufactured by Air Power Products Limited (APPL)based in CANADA
Versatile, Efficient, and Durable Regenerative Blowers for Assorted Industries. Regenerative blowers are compact and versatile machines, designed to move large volumes of air at low vacuums or pressures. Air Power Products Ltd. (APPL) provides a full range of models in various voltage options for industrial and commercial users to choose ...
-
Manufactured by Fluence Corporationbased in USA
This revolutionary aerobic wastewater treatment solution is modular and reduces energy usage by up to 90% compared to conventional treatment. Activated sludge treatment has long been used for aerobic wastewater treatment, but its aeration stage is particularly energy-intensive, which makes it less cost-efficient as a step in decentralized water reuse. At Fluence, our self-respiring membrane ...
-
Manufactured by Fluence Corporationbased in USA
Upgrade Wastewater Treatment Plants with SUBRE; With increased urbanization, wastewater resource recovery facilities face new challenges. When a conventional activated sludge wastewater treatment facility has reached its limit, Fluence's SUBRE can come to the rescue. Instead of enlarging current plants and building new basins, SUBRE modules are submerged in existing chambers, improving effluent ...
-
based in USA
Lower energy costs, increase productivity, and lower your footprint with our latest MBR. LEAPmbr* builds on 25 years of membrane bioreactor experience to deliver the most advanced MBR solution to date. It dramatically lowers energy costs, increases productivity, and offers a flexible design that can fit within a smaller footprint than conventional MBR technology. See how GE offers our wastewater ...
-
Manufactured by LeMar Industries - a division of CTB, Inc.based in USA
Our wall frames are hot dip galvanized after fabrication. The walls are partly pre-assembled in 8' sections. Each is securely anchored so no additional cabling is ...
-
Manufactured by Cambrian Innovation Inc.based in USA
The EcoVolt MBR (membrane bioreactor) is an aerobic digester that combines state-of-the-art aeration, robust membrane filtration, and a dynamically integrated controls architecture to remove >99% of contaminants from wastewater streams, enabling water ...
-
Manufactured by Aqua Bio Technologiesbased in USA
The Pro-Air odor-control system utilizes natural forces to prevent reused wash water from containing an odor. Traditional methods of odor control are chlorine bleach, air spargers, bubblers, and ozone. These methods have all proven to be ineffective for year-round control of odors caused by anaerobic bacteria. The Pro-Air odor-control system includes an aeration pump and ...
-
Manufactured by Great Lakes Bio Systems, Inc.based in USA
Built to last, simple assembly and energy-efficiency are what makes the Eclipse EC44 a solid pond aerator diffuser. Includes a perfectly weighted base, microporous aeration membrane, built-in check valve, hose barbs for 3/8" or 1/2" air line, tagline tie off spot and convenient handle all in one small footprint. No extra fittings required. The Eclipse EC44 is engineered to have a high CFM ...
-
Manufactured by In-Situ Processbased in USA
The TurbiTechw² HR Sensor has been specifically designed for use in wastewater treatment systems where high levels of suspended solids are desirable in the aeration phase. Membrane Bio Reactors (MBR) typically run with MLSS values in the region of 8,000 to 14,000 mg/l. High MLSS concentrations promote numerous process benefits, including stable operation, complete nitrification, and reduced ...
-
Manufactured by Enviro-STEP Technologies Incbased in CANADA
Enviro-STEP Technologies, Canadian distributor of unique gravity flux hollow plate membranes from Alfa Laval is proud to offer the STEP-MBR, the most simple and less mechanized MBR on the ...
-
Manufactured by Solimar Pneumaticsbased in USA
Replace inefficient fabric pads and aerator plates in Fruehauf and other bulk ...
-
Manufactured by WILO GVA GmbHbased in GERMANY
With the latest generation of aerators, the ELASTOX-P plate air diffuser, we offer a new system component for sewage technology based on our extensive know-how and many years of experience in the production and operation of waste water treatment ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you