Membrane Filter Monitoring Equipment For Water And Wastewater Available In Nova Scotia
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
Analog pH electrodes for food measurement. Special electrodes SenTix Sp and SenTix Sp-DIN with spear-type membrane, hole junction and polymer ...
-
Manufactured by TE Connectivitybased in USA
Mass Air Flow Sensor Components are using sensitive fast thin film Nickel heaters on thin film silicon nitride membranes. This ensure high sensitivity and fast response. This technology is automotive proven. For the compensation of the ambient temperature the reference sensors are placed on the same chip made from the same thin film Nickel as the heaters. This mass air flow sensor on a hybrid ...
-
Manufactured by GEAbased in USA
The GEA Filtration Model M pilot plant is a laboratory-scale test plant designed for feasibility testing of cross-flow membrane filtration applications in the Micro Filtration (MF), Ultra Filtration (UF), Nano Filtration (NF) ranges. The unit can be set up for evaluation of a variety of membrane formats including spiral-wound, ceramic, stainless steel and hollow fiber. The modular design allows ...
-
Manufactured by EK Engineeringbased in INDIA
Fischer NB10 is well probe from liquid level monitoring of water or liquid containers and bodies including dams, tanks etc. It has long term measuring stability with high accuracy and corrosion-resistance. NB10 uses principle of hydrostatic pressure measurement principle, and thus can monitoring two 250 meter ...
-
Manufactured by PS Prozesstechnik GmbHbased in SWITZERLAND
PiloMem units are designed for piloting of pressure driven membrane processes with typical batch sizes of 20-500 litres. All sorts of membrane modules in industrial scale can be used. The units are built in a stainless steel rack. Various membrane modules can be used on an industrial scale. The systems are installed in a stainless steel frame on rollers with a maximum base area of 80x120 cm and a ...
-
Manufactured by Lacroix Sofrelbased in FRANCE
CNPR: piezoresistive pressure sensor for a 1/4" DIN 3852 gas coupling with a high-quality stainless steel membrane. It measures the pressure on hydraulic or pneumatic pipes. It connects to a standard thread and delivers a signal proportional to the pressure in the ...
-
Manufactured by GEAbased in USA
The Model C membrane filtration pilot plant is a flexible unit for testing ceramic membranes on low pressure Membrane Filtration and Ultra Filtration applications. Model C pilot plants can be configured to run higher pressure Ultra Filtration/Nano Filtration applications as well as other tubular membranes (inorganic or ...
-
Manufactured by I.W. Tremont Co., Inc.based in USA
I.W. Tremont offers a diverse range of specialty products to help you meet your specific testing and application ...
-
Manufactured by GEAbased in USA
The Model L membrane filtration pilot plant is designed for performing preliminary membrane screening tests for all membrane filtration technologies (Membrane Filtration, Ultra Filtration, Nano Filtration and Reverse Osmosis) quickly and economically on small volumes of feed ...
-
Manufactured by GEAbased in USA
The GEA Filtration Model G membrane filtration pilot plant is a pilot-scale plant designed specifically for application development utilizing specialized tubular microfiltration membranes cast on a microporous, sintered stainless steel support ...
-
Manufactured by Sentronicbased in GERMANY
Optical DO sensors for water quality management and aquaculture ...
-
Manufactured by Oxipack B.V.based in NETHERLANDS
Why food is still regularly packed in cans is because it ensures a longer shelf life. Canning food products is preventing the food from spoiling or becoming contaminated. Once the canning process is complete, the sealed container creates an airtight environment that keeps the food fresh for an extended period. But to ensure the longer shelf life, the can must be leak-tight. Additionally, canning ...
-
Manufactured by Gefran S.p.A.based in ITALY
The 'IMPACT' series of Gefran are pressure transmitters, without transmission fluid, for using in high temperature environment (350°C). Medium pressure is transferred directly to the sensitive silicon element via a thick diaphragm. Strain is transduced by a micro-machined silicon structure (MEMS). The operating principle is piezoresistive. The micro structure includes the measurement ...
-
Manufactured by Dragon Water Technologies Ltd (DWT)based in UNITED KINGDOM
The Neptune RO systems have been designed to meet the requirements of commercial and industrial operators. 5 systems are included in the range to meet RO water production levels of 150 to 1250 litres per ...
-
Manufactured by Hydrotech ZS Consultingbased in USA
Ultra rugged HydroTech 8 AA battery housing with screw-free locking mechanism. Battery housing machined from one solid piece, no gluing; no rubber bands to hold the batteries. Extend your deployment time and minimize the risk of leaks and damage to your unit. Battery housing is fully sealed from the main housing. Any leakage to the battery compartment will not go through to the main housing. ...
-
Manufactured by LiqTech International A/Sbased in DENMARK
The LabBrain pilot unit is designed forthe CoMem membrane elements which includes OD25x305/1016/1178mm, Hexa 28/31xl020mm* and Hexa ...
-
Manufactured by PS Prozesstechnik GmbHbased in SWITZERLAND
A flexible unit for all pressure driven membrane processes: reverse osmosis, nanofiltration, ultrafiltration and microfiltration. Easy change of membrane module: flat-channel or tubular ceramic for screening of membranes and spiral wound modules for larger membrane area and scale-up. Feed vessel with 2.5 or 5 l volume or any external feed vessel, big enough for all lab ...
-
Manufactured by ORI Abwassertechnik GmbH & Co. KGbased in GERMANY
The PSK 307 is designed to continuously measure the depth in water or waste water applications. Suitable for all fluids that are compatible with media wetted materials. The PSK 307 sensor is an ultralow power device and suitable for battery powered applications. The sensor has its own diagnostic functions and it can also detect hardware errors and wrong resistance on the ceramic ...
-
Manufactured by Porometer a Division of Aptco Technologies Nvbased in BELGIUM
The new High Throughput Gas Separation (HTGS) system is a device designed to run up to 16 different membrane-based separations of variable single and mixed gas feeds simultaneously. Up to 5 gases (O2, CO2, CH4, N2 and H2) can be mixed at a set flow. The on-line analysis option permits screening mixed gas selectivities, in comparison to single gas permeation ...
-
Manufactured by Impetux Optics S.L.based in SPAIN
Impetux’s exclusive, patented force spectroscopy technology leads you where other force methods cannot; Our products represent a breakthrough in how optical tweezers force measurements are performed, enabling and making simple unprecedented experiments where traditional trap stiffness calibration ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you