Membrane Filtration Applications

27 Results found
Only show results in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: Membrane Filtration ×

Membrane filtration systems for biotechnology and pharmaceutical industry

by GEA Filtration     based in Hudson, WISCONSIN (USA)

GEA Filtration is experienced in processing a wide range of products on a commercial basis and by testing products at the plant site or in our pilot plant testing facility. Definition of the Industrial Biotech and Environmental Biotech Sector. This sector uses living organisms to manufacture a variety of products that result in the reduction of pollution, resource consumption and waste. Typical products include bioethanol, industrial enzymes, biological fuel cells, enzymes for bioremediation, biodegradable plastics and much more.

Process Belt Meshes for Belt Filter

by GKD - Gebr. Kufferath AG     based in Düren, GERMANY

VACUBELT filter belts for belt filters guarantee continuous filtration with high throughput, low residual moisture and optimal results for the filter effect.

Filtration systems & solutions for industrial process sector

by Porvair Filtration Group     based in Fareham, UNITED KINGDOM

The process industry demands filters that can withstand the most extreme and aggressive conditions of temperature, pressure and corrosion, whilst safeguarding operators and systems from particulates and ensuring environmental protection. Each filtration and separation requirement presents its own critical challenges and requires superior reliability, durability and a robust product construction.

Membrane filtration systems for food and beverage industry

by GEA Filtration     based in Hudson, WISCONSIN (USA)

The product knowledge we gained by this experience is indicated by the following list of products suitable for processing on a GEA Filtration membrane filtration system. These systems include microfiltration, ultrafiltration, nanofiltration, and reverse osmosis with either spiral-wound, stainless steel, ceramic, tubular, or plate-and-frame configurations.

Advanced water treatment equipments for desalination

by Advanced Equipment and Services, Inc. (AESINC)     based in Coconut Creek, FLORIDA (USA)

Areas that have no or limited surface water or groundwater may choose to desalinate seawater or brackish water to obtain drinking water. Reverse osmosis is the most common method of desalination, Sea Water Reverse Osmosis (SWRO) is a reverse osmosis desalination membrane process that has been commercially used since the early 1970s. Because no heating or phase changes are needed, energy requirements are low in comparison to other processes of desalination, though still much higher than other forms of water supply (including reverse osmosis treatment of wastewater).

Industrial and commercial water filtration for reverse osmosis plants

by Hydro-Gen Engineering Ltd     based in Widnes, UNITED KINGDOM

Reverse Osmosis or RO is a system used to produce an ultra-high quality of water with use of membrane. Reverse Osmosis plants are required in many production processes.  Damage to these high quality membranes can easily be caused if no pre-filtration is in place to protect the system from high loading, this can result in extremely high costs of repairs, ranging from tens of thousands to millions, not to mention the loss of production to a company if as a result of plant failure production has to be stopped until the system is repaired.

Membrane filtration systems for reduction of BOD/COD

by GEA Filtration     based in Hudson, WISCONSIN (USA)

Reverse Osmosis Polishers can concentrate BOD/COD from evaporator condensate and RO permeate streams to reduce waste water. Polished water can also be re-used in plant for boiler water make-up and CIP systems. In Dairy Industry applications, `polishing` of these process water streams aids in the production of Class I water for re-use from dairy products as defined and regulated under Food & Drug Administration rules. Water produced with this technique is also very soft, generally resulting in lower cleaning chemical consumption.

Particle filtration for the food industry

by atech innovations gmbh     based in Gladbeck, GERMANY

In chemical and biotechnological applications, ceramic membranes ensure protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and more. 

Specialty Cleaners and Lubricants for Filter Membrane Industry

by International Products Corporation     based in Burlington, NEW JERSEY (USA)

International Products Corporation has been selling cleaners to the filter membrane industry for over 30 years. Our proprietary formulated cleaners work effectively at restoring 100% flux at safe pH ranges.  We have a wide variety of chemistries available for all membranes and soils and an on-site R&D laboratory that offers technical support and assistance.  All of our cleaners are free of solvents, phosphates, silicates, phenols, and Substances of Very High Concern.

Chemical Water Treatment for membrane treatments

by Kurita     based in Ludwigshafen, GERMANY

Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

Specialty Cleaners and Lubricants for Electronics Industry

by International Products Corporation     based in Burlington, NEW JERSEY (USA)

Our cleaners are used in the manufacture of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items.  They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals.  When rinsed properly our products leave absolutely no residue.  They are also proven in removing soils from filter membranes used in wastewater treatment systems.

Ceramic membrane filter

by Nanjing Tangent Fluid Technology Co., Ltd.     based in Nanjing, CHINA

Nanjing Tangent Fluid Technology Co., Ltd, a high-tech company for liquid separation in process industry, has cooperations with domestic institutes and European famous membrane companies for membrane technology.Tangent Fluid has a manuafaturing plant and R&D center in Nanjing, where we can design and manufacture filtration equipments of Microfiltration/Ultrafiltration/ Nanofiltration /Reverse Osmosis, and make research and development for new process and technology based on membrane process. Tangent Fluid has also invested to another modern producing plant in Shanghai for ceramic membranes production,with a whole set of equipment like Vacuum Pugmill, Extruder, Oven, Full Automatic High Temperature Furnace, and Testing Machines. All raw material is high quality from domestic and abroad porus ceramic membrane filter with first grade quality could be manufactured under our unique technic and strict quality control system.

Water Treatment Solutions for Turbidity Removal

by Adedge Water Technologies, LLC     based in Buford, GEORGIA (US) (USA)

Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a turnover of those levels, bringing sediment, plants, and algae to the top.

Industrial Water Filtration

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

QUA is a leading-edge developer and manufacturer of advanced membrane products, that are engineered with innovative technologies, and are used to treat challenging waters.

Filtration systems & solutions for pharmaceutical industry

by Porvair Filtration Group     based in Fareham, UNITED KINGDOM

Filtration and separation processes in the pharmaceutical industry are critical, not only to ensure products are adequately purified and fit for consumption, but also to optimise process economics and prevent loss of valuable product. Porvair Filtration Group has over 25 years experience in providing innovative solutions that meet the customer’s requirements as well as standards set by the regulatory authorities.

Filtration systems & solutions for food & beverage industry

by Porvair Filtration Group     based in Fareham, UNITED KINGDOM

Filtration within food and beverage processing, is a safe and economic method for removing impurities and extending the shelf life of many consumable products. High cleanliness standards and stringent contamination control is of utmost importance within the industry, ensuring the manufacture of superior quality produce, a significant reduction of waste and a minimum of product spoilage.

CeraQ - Ceramic Membrane Modules

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

QUA’s CeraQ ceramic membrane modules are designed for challenging water and wastewater applications. The CeraQ modules consist of 3.5 mm ID ceramic tubular elements potted into bundles for various surface area requirements. The module is capable of removing virus, bacteria, colloidal matter, submicron or micron sized suspended particles, oil and organics from a wide range of fluids, including drinking water and industrial wastewater to economically meet variety of treatment objectives or to recycle and reuse wastewater. One of CeraQ's applications is that drinking water filtration for removal of bacteria/virus. achieves 10-log bacteria and 4-log virus removal.

Water Treatment Solutions for Fluoride Removal

by Adedge Water Technologies, LLC     based in Buford, GEORGIA (US) (USA)

Fluoride is a naturally occurring mineral in the soil in some areas of the country. It can leach into the drinking water supply. At low levels, it is not considered to be harmful. In fact, many water treatment plants add fluoride to the water because fluoride has been shown to help decrease tooth decay. However, higher levels can be hazardous to our health.

Need help finding the right suppliers?

Let the XPRTs do the work for you