scaling Articles
-
How to Select an Effluent Treatment?
The first step is accurately gauging the total effluent volume and flow rate with a survey to size the treatment capacity properly. In parallel, estimate if your production processes or volumes could expand, meaning greater effluent generation. The treatment selected must have adequate capacity. Quantifying both the current flow requirements and potential increases lets us identify and design ...
-
How Does Commercial Ultrafiltration Work?
Commercial ultrafiltration uses standard low pressure to push water through a membrane to filter out contaminants, bacteria, viruses and parasites whilst retaining minerals in the water. Ultrafiltration is implemented commercially in a variety of ways, small kits can be installed under your sink at home to improve the quality of drinking water from your tap. It’s also used in a much ...
-
The innovators trying to bring down the sky-high cost of direct air capture
Although the fundamentals of direct air capture are fairly standard – huge facilities with massive fans drawing air in to remove the CO2, normally in a remote landscape – there are a number of technologies to do it. But all of them are trying to bring down the high energy needs, and hence cost, of DAC. The key divide is between high-temperature and low-temperature DAC. Two ...
-
What is Industrial Wastewater Treatment - and who needs it?
Every business that makes something on an industrial scale produces wastewater, sometimes at millions of litres daily. All that wastewater must go somewhere, but contamination can make reuse and discharge impossible. The simple solution is industrial wastewater treatment, either on-site or off-site, to transform it into a cleaner product suitable for discharge or reuse. But who needs these ...
-
Difference between hollow fiber and flat sheet membrane
Hollow fiber and flat sheet membranes are two commonly used configurations in membrane filtration processes. They differ in their physical structure, mode of operation, and application. Here are the key differences between hollow fiber and flat sheet membranes: 1. Physical Structure: Hollow Fiber Membranes: As the name suggests, hollow fiber membranes consist of small, cylindrical fibers with ...
-
Principles of Solid-Liquid Separation for the Pharmaceutical Industry
Solid-liquid separation is necessary in many industries for compliance, quality control, and efficient production processes. In the pharmaceutical industry, solid-liquid separation is conducted in applications such as biocatalysis, active pharmaceutical ingredient (API) purification, and chromatography, to name a few. The separation process can be carried out through a range of instruments, but ...
-
Select the most suitable nitrogen separation method for your industrial nitrogen project
The selection of nitrogen separation method is the key of the whole nitrogen production project. It is not only related to the construction cost of the nitrogen production project, but also related to the long-term operation cost of the whole nitrogen production project. Therefore, it is particularly important to select the appropriate nitrogen separation method. Cryogenic Nitrogen Separation ...
-
Partnership - PHILOS & Aquammodate partners to revolutionize the desalination industry with biomimetic membranes.
PHILOS Co. Ltd., a leading manufacturer of membranes for wastewater treatment, announces a collaboration with Aquammodate, a Gothenburg, Sweden-based green technology firm. The two firms intend to collaborate on the development and commercialization of pilot-scale membrane production. PHILOS has over two decades of experience creating and commercializing membranes and is devoted to continuing to ...
-
Specialized Electrocoagulation for Water Hardness Removal, An Innovation in Water Remediation
Hardness in water can be characterized into its primary constituent mineral components, typically calcium and magnesium. Excess water hardness in a water supply creates many issues for industry, utilities and life in general.Calcium and magnesium which are the principal sources of this issue are found in many sedimentary rocks, the common being chalk and limestone which are abundant in many areas ...
-
Plate And Frame Filter Press | YASA ET
YASA ET industrial plate and frame filter press is a tool used in separation processes, specifically to separate solids and liquids. The machine stacks many filter elements and allows the filter to be easily opened to remove the filtered solids, and allows easy cleaning or replacement of the filter media. Filter presses cannot be operated in a continuous process but can offer very high ...
By YASA ET
-
HOW TO ASSESS THE EFFICACY OF UV DISINFECTION USING ATP TESTING?
UV disinfectionHow does it work? Nowadays, UV disinfection is commonly used for drinking water treatment. UV radiations alter nucleic acids (DNA and RNA) of most cells such as bacteria, viruses or protozoans. They damage the genetic material of microorganisms preventing them from replicating or ensuring part of their metabolic functions. UV radiations inactivate microorganisms. ...
-
The function of sludge drying
Drying the sludge has the following advantages: (1) Reduction: Due to the high water content of the sludge, the volume is large and fluid. After the above process, the volume of sludge is reduced to one tenth of the original, and it is converted from liquid to solid, which is convenient for transportation and consumption. (2) Stabilization: The sludge has a high content of organic matter, which ...
-
The History of Water Distribution and Treatment
Introduction Ancient water distribution and treatment methods originated millennia before principles of modern hydraulic design, such as conservation of mass, energy, and momentum, were even put to thought [1]. Spending most of human history as hunters and gatherers, only in the last 10,000 years did civilizations develop more sophisticated means of agriculture-use and, in turn, water ...
-
Abu Dhabi Pivots from Thermal to Reverse Osmosis Desalination
Technological advances are making membrane processes more efficient than ever Currently, reverse osmosis (RO) desalination accounts for 60% of Oman’s capacity, and the majority of Saudi Arabia’s planned capacity will rely on reverse osmosis. While reverse osmosis has become the preferred desalination process worldwide, the Middle East has remained a stronghold of large-scale thermal ...
-
TSLP transfer station leachate treatment equipment
Waste transfer station leachate problem The waste transfer station in each city is an important hub for waste collection and transfer treatment, and the leachate from the transfer station has the characteristics of high COD, high ammonia nitrogen, high suspended solids and high oil content, which is difficult to treat due to the limited scale and space of the site. Traditional external ...
-
Back to the Basics: Membrane Process and Development (MP&D)
Sterlitech is an innovator in the development of bench-scale cross flow test cells for membrane development, studies, and small scale processing applications. But what does that actually mean? Bench-scale: The term “bench” is shorthand for lab or work bench, and describes the coveted and often constrained space upon which most researchers or technicians use their equipment. Our ...
-
Overview of High-salt Wastewater Treatment Technology
The treatment of high-salt wastewater is a major environmental issue facing industrial development at this stage. Comprehensive utilization is an important way to solve the bottleneck of high-salt wastewater. The application of high-salt wastewater reuse technology is an important guarantee for achieving significant economic, environmental and social benefits. This article is based on the status ...
-
"Are you looking to manufacture hollow fiber membranes?" Here are three arguments to go for PHILOS
If you are a researcher or a practitioner working in the field of membrane development and are looking for a company that can serve you with the best membrane research and development equipment then PHILOS is the right place to contact. Recognizing the user’s mind of research for convenience, reproducibility, reliability, and accuracy, PHILOS offers the most precise, user-friendly, and ...
-
What Membrane Filters are Right for Me?
Question: How do I know if a membrane process is suitable for my unique application? Usually, researchers start with bench-scale feasibility testing. That means using a membrane sample from a large-scale membrane module offered by commercial manufacturers and testing that in a bench-scale filtration setup. Using only a small feed volume, researchers can mimic the hydrodynamic conditions of ...
-
How does a business utilise funding to scale up its technology?
Maven caught up with graphene technology water treatment business, G2O Water Technologies, who secured funding via NPIF Maven Equity Finance last year, to enable the company to forge more collaborative partnerships with industrial partners from its Manchester headquarters. With an increasing need for high quality drinking water using affordable solutions in both industrialised nations and the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you