microfiltration Equipment available in Oregon

Available in Oregon| Near Oregon
94 Results found

We couldn't find any microfiltration equipment in Oregon

Here is a list of results available in Oregon

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Membrane Filtration ×

  • Keyword: microfiltration ×

  • Available in: USA ×

  • Available in: Oregon ×

contec - Filterelements for Microfiltration

by contec GmbH Industrieausrüstungen     based in Bad Honnef, GERMANY

Application: contec Membrane filter elements for microfiltration, water reprocessing, pharmaceutical products, vaccines etc.

contec - Filter Housings Made of Stainless for Microfiltration

by contec GmbH Industrieausrüstungen     based in Bad Honnef, GERMANY

Application: contec Membrane filter housings made of stainless for microfiltration, beverage industry, pharmaceutical products, ultrapure water, foods, oil, solvents etc.


by Hydro Air Research Italia (HARI)     based in Merlino (LO), ITALY

Microfiltration is the most open cross-flow filtration device. Typical application of this low pressure process is the removal of high molecular weight compounds such as bacteria, fats, yeasts and fungi: clarification of chemical, biological, pharmaceutical or food solutions, product purification, waste water treatment.

Model 2 Inch - Sanitary Microfiltration Elements

by Synder Filtration     based in Vacaville, CALIFORNIA (USA)

Synder Filtration's 2' sanitary microfiltration elements are ideal where 800KD to .2µ membrane pore sizes are required for pilot studies and other low volume operations. With large inventories of these elements stored strategically around the globe, common models are available with same-day shipping.

TriSep - Model UE50 - Polyethersulfone Ultrafiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

UE50 membrane is a polyethersulfone ultrafiltration membrane with a molecular weight cut-off of 100,000 Daltons. UE50 rejects 90% of 100,000 molecular weight dextran. UE50 membrane is used for applications to remove macromolecules or to concentrate large organic solutes.

TriSep - Model UA60 - Piperazine-Based Thin-Film Composite Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

TriSep UA60 Membrane is a piperazine-based thin-film composite membrane that is considered both a “tight” UF membrane as well as an “open” or “loose” NF membrane. UA60 has limited monovalent salt pore size and MgSO4 pore size between 70-90%. UA60 has a molecular weight cut-off between 1,000-3,500 Daltons. Due to ...

TriSep - Model UE10 - Polyethersulfone Ultrafiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

UE10 membrane is a polyethersulfone ultrafiltration membrane with a molecular weight cut-off of 10,000 Daltons. This membrane rejects 95% of cytochrome c, an amino acid with a 12,000 molecular weight. UE10 is used in water purification applications such as dialysate water purification and beverage water make-up, as well as process applications ...

TriSep - Model TM10 - Polyvinylidene Fluoride (PVDF) Microfiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

TM10 membrane is a polyvinylidene fluoride (PVDF) microfiltration membrane with a pore size of 0.2 micron. TM10 is a high flux membrane used to remove macromolecules and is typically used to concentrate large organic solutes.

TriSep - Model UF10 - Polyethersulfone Ultrafiltration Membrane

by TriSep Corporation     based in Goleta, CALIFORNIA (USA)

UF10 is a new 10K molecular weight cut off (MWCO) polyethersulfone ultrafiltration membrane developed for use in food, dairy, and process applications. Combined with TriSep's sanitary TurboClean outer shell these membranes are ideal for milk and whey protein concentration.

Microfiltration Membranes

by Esmil Process Systems Ltd     based in High Wycombe, UNITED KINGDOM

Microfiltration (MF) is a process which removes contaminants from a liquid by passage through a microporous membrane, physically excluding particulate matter. A typical MF membrane pore size range is 0.1 to 10 µm.

WWE - Microfiltration Systems

by Water & Wastewater Equipment Company     based in Cleveland, OHIO (USA)

Our tubular crossflow microfiltration membrane systems are designed to remove selected inorganic, organic, or heavy metal contaminants to meet the regulatory compliance and/or water recycle objectives. They provide nominal 0.2 micron filtration, require no polymer addition, and typically require less operator attention than clarification systems. ...

Microfiltration System

by Lama Sistemas de Filtrado S.L     based in Gelves - Sevilla, SPAIN

Microfiltration is a very efficient technology for solids separation and recovery of products in all kinds of liquids. Microfiltration has a retention grade smaller than a conventional filter, the cartridges used for microfiltration have pore size of 0.1-20 microns. By having a porosity so small, these filters have the additional advantage of ...

HYDRAcap - Model MAX - Superior Microfiltration

by Hydranautics A Nitto Denko Company     based in Oceanside, CALIFORNIA (USA)

HYDRAcap MAX is used to treat a wide range of highly variable waters as either primary treatment or as pretreatment to reverse osmosis (RO) and nanofiltration (NF). Compared to conventional pretreatment, the HYDRAcap MAX offers the combined benefits of high recovery and low footprint requirement due to its optimized membrane area and novel ...

Microfiltration Media

by W. L. Gore & Associates     based in Newark, MARYLAND (USA)

GORE Filtration Media has been the first choice for reliable and consistent filtration performance for over 30 years. The unique microstructure of expanded polytetraflouroethylene (ePTFE), with its billions of interconnected continuous fibrils, make it ideal for semiconductor manufacturing, pharmaceutical processing and other critical ...

Polymem - UltraFiltration and Microfiltration

by Polymem     based in Castanet-Tolosan, FRANCE

The range for UltraFiltration and microfiltration custom made modules : To create products that meet your needs, Polymem offers specific membranes for insertion into housings you can choose: standards, manufactured on demand or from your supply.

Steuler - Steuler Acid Microfiltration (SAM)

by Steuler Anlagenbau GmbH & Co. KG     based in Hoehr-Grenzhausen, GERMANY

The solids homogenized due to a continuous mixing of the pickling baths are supplied with pickling solution in a partial stream of the microfiltration system. The principal part of this separating stage are one or more Cross-Flow-Microfiltration modules to press the pickling solution through the membrane at high speed. The solids are completely ...

Model 50 GPM - Tubular Microfiltration System

by LT Technologies, Inc.     based in East Bridgewater, MASSACHUSETTS (USA)

A great fit for many different objectives and environments, microfiltration is evolving in its design to include metals precipitation, protein separation for healthcare and food based high purity streams, as well a concentration and suspended solids removal for juice pulp extraction. LT Technologies has extensive experience in every use area of ...

Microfiltration / Ultrafiltration System

by Aquarion AG     based in Baar, SWITZERLAND

The principle of microfiltration and ultrafiltration is physical separation. The extent to which undissolved solids, turbidity and microrganisms are removed is determined by the size of the pores in the membranes. Substances that are larger than the pores in the membranes are fully removed. Substances that are smaller than the pores of the ...

Microfiltration (MF) for Membrane System

by PAPSCO, Inc.     based in Cleveland, OHIO (USA)

Removal of sub micron particulate using crossflow technology. Microfiltration (MF) has significant applications in simple dead-end filtration for water, sterile fruit juices and wine, and aseptic pharmaceuticals. However, not all applications that benefit from MF operate successfully in the dead-end mode, and a large portion of the MF market has ...

Microfiltration and Ultrafiltration System

by Water Treatment Engineering Company (WTE)     based in Praha 10, CZECH REPUBLIC

Standard technology of water cleaning from organic and microbial contaminations requires implementation of additional stages (ozonization, sorption by activated carbon, etc.) that leads to increase of operation costs and prime cost of cleaned water. Due to this fact membrane methods of water cleaning are coming into widespread acceptance. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you