Membrane Housings Equipment For Water And Wastewater Available In Monaco
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Lenntech can help you with replacement adapters for membranes and and caps. Standard adapter from all brands are available and even non standard adaptors can be made from a solid pieces of PVC or other type of plastic. We are also able to quote new or replacement seals for membranes, pressure vessel housing and end ...
-
Manufactured by Knappe Composites S.A.Sbased in FRANCE
Knappe presents It's MODULAR high pressure membrane housing. Xt8ZxM-Q3xW; usefull for smaller units, permeate can be taken on feed or brine ...
-
Manufactured by Oztter Corporationbased in TAIWAN
R series Ro membrane is available in SUS304、SUS306 stainless steel which has high-temperature capability. Nylon and stainless Ro head are provided to choose according to the budget. Nylon Ro head is a highly cost-effective choice. It is made of high-quality material and has good effective time in proper use. Stainless steel Ro head resistant to UV rays and sunlight, and has high-pressure ...
-
Manufactured by Hebei Chengda Water Technology Co.,Ltd.based in CHINA
Winder® 4" FRP RO membrane housing is the preferred choice for water treatment in the membrane process. 150 PSI to 1200 PSI, side port or end ...
-
Manufactured by HID Membrane Co., Ltd.based in CHINA
Using food-grade plastic, safe, and non-toxic. The characteristics are high strength, acid and alkali resistance, bacterial corrosion resistance, and good temperature ...
-
based in CANADA
Technical Parameters: Structure: Standard accessories, Easy to install. Cover Type: TC-Clamp Membrane Housing, Inside Cap Membrane Housing, Frange Membrane Housing. Working Pressure: 2.0-2.5MPa. Inlet Type: End-in Type, Side-in Type. Finish: Mirror ...
-
Manufactured by Pentair Water, Codeline Divisionbased in INDIA
Codeline OCTA 80U is membrane housing series of 8” diameter with side entry design with OCTA Technology. This is used for ultra-high feed flow commercial, municipal and industrial RO applications. Vessel models are available in operating pressure of 300 PSI, 450 PSI, 600 PSI with multiport connectivity. These are made up of epoxy/ glass composite to meet the demands of long term and ...
-
Manufactured by Applied Membranes, Inc.based in USA
CodeLine 40E Series Membrane Housing is designed for continuous, long-term use for Reverse Osmosis and Ultra-Filtration applications in typical industrial and commercial water treatment systems at pressures of 300, 600, and 1,000 PSI. CodeLine™ membrane housings are built to maximize the performance of your water purification systems. For over 3 decades, CodeLine pressure vessels have been ...
-
Manufactured by Pentair Water, Codeline Divisionbased in INDIA
Codeline OCTA 80H is membrane housing series of 8” diameter with side entry design equipped with OCTA Technology. This is used for high feed flow commercial, municipal and industrial RO applications. Vessel models are available in operating pressure of 150 PSI, 300 PSI, 450 PSI, 600 PSI, 1000 PSI and 1200 PSI with multiport connectivity. These are made up of epoxy/ glass composite to meet ...
-
Manufactured by Pentair Water, Codeline Divisionbased in INDIA
Codeline OCTA 80S is membrane housing series of 8” diameter with side entry design equipped with OCTA Technology. This is used for commercial, municipal and industrial RO applications. Vessel models are available in operating pressure of 150 PSI, 300 PSI, 450 PSI, 600 PSI,1000 PSI and 1200 PSI with multiport connectivity. These are made up of epoxy/ glass composite to meet the demands of ...
-
Manufactured by Pureteck Co., Inc.based in USA
The premium PureT five-stage RO system with a 50GPD membrane features NSF-certified double-seal filter housings and quick-connect fittings. The newly upgraded standard RO system now offers a more advanced system completely concealed within the unit for a sleek outer ...
-
Manufactured by Membracon Process Separations b.v.based in NETHERLANDS
The membrane assembly consists of a pressure vessel with a membrane that allows feedwater to be pressed against it. The membrane must be strong enough to withstand whatever pressure is applied against it. Reverse-osmosis membranes are made in a variety of configurations, with the two most common configurations being spiral-wound and ...
-
Manufactured by Rotatek Arıtma ve Çevre Teknolojileri San. ve Tic. Ltd. Şti.based in TURKEY
Ultrafiltration systems are advanced cross flow filtration technology that provides 0.02 micron filtration. Unlike reverse osmosis and nano-osmosis systems, ultrafiltration units can not provide ion removal. Ultrafiltration systems are being used for sediment filtration and bacterial, microorganisms removal. UF Systems are widely used as pre-treatment units before reverse osmosis and sea water ...
-
Manufactured by PACTbased in CHINA
Reverse Osmosis (RO) is a process that uses pressure applied through a membrane barrier to remove dissolved solids from a liquid. The RO process uses cross-flow filtration as compared to depth filtration. The former has three streams while the latter two. In RO the feed flows tangentially over a membrane surface and separates into permeate and concentrate. The concentrate is normally wasted ...
-
Manufactured by Hydra-Clear Process Water Ltdbased in UNITED KINGDOM
Experience optimal performance and superior durability with our Hydra-Clear 8" FRP (Fiberglass Reinforced Plastic) RO (Reverse Osmosis) membrane housings. With a working pressure ranging from 150 PSI to 1200 PSI, these housings are designed to offer flexibility and reliability, whether you require side port or end port ...
-
Manufactured by Chester Paul Companybased in USA
Reverse Osmosis Membrane Housing - 90* Outlet 1/8" NPT. NSF listed component. Manufactured from an FDA-approved polypropylene. Accommodates most 12" membrane elements. 90 angle outlet. ...
-
Manufactured by Pentair Water, Codeline Divisionbased in INDIA
Codeline 40S is membrane housing series of 4” diameter with side entry design. This is used for commercial, municipal and industrial RO applications. Vessel models are available in operating pressure of 300 PSI, 450 PSI and 600 PSI with multiport connectivity. These are made up of epoxy/ glass composite to meet the demands of long term and continuous use in RO processes. Codeline 40S ...
-
Manufactured by Pureteck Co., Inc.based in USA
The premium PureT five-stage RO system with a 50GPD membrane and a booster pump features NSF-certified, double-seal filter housings and quick-connect fittings. The newly upgraded standard RO system now offers a more advanced system completely concealed within the unit for a sleek outer ...
-
Manufactured by Applied Membranes, Inc.based in USA
Attractive & Reliable 2.5” PVC pressure vessel membrane housings are available for 2.5x14, 2.5x21 & 2.5x40 size membranes. This U-Pin style pressure vessel membrane housing is designed for direct connection to industry standard AMI/Applied Membranes style elements. The AMI 2.5” Dia. PVC membrane housings are designed for continuous use in a membrane water treatment ...
-
Manufactured by MIS Industrybased in TURKEY
Cold Water Line Valve: Valve that fits onto the cold water supply line. The valve has a tube that attaches to the inlet side of the RO pre filter. This is the water source for the RO system. Pre-Filter(s): Water from the cold water supply line enters the Reverse Osmosis Pre Filter first. There may be more than one pre-filter used in a Reverse Osmosis system, the most common being sediment and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you