Metering Pumps Articles

  • Controlling the Flow Capacity of a Metering Pump

    Since a metering pump is usually a positive displacement pump there are two possible ways of controlling the flow capacity. The first one is by adjusting the volume of liquid displaced per stroke of the pump and the second is by adjusting the speed of the strokes. I. Stroke Length – control the displacement volume per stroke II. Speed of Strokes per minute Stroke Length ...


    By Aquflow

  • Sizing and Selecting the Proper Metering Pump: Part 1 of 2

    A typical agriculture or process application can consume large amounts of chemicals during daily operations. While the volumes may be large, though, they must also be very precise, with exact amounts delivered according to strict injection schedules. The pressures—from very high to very low—that the chemicals are injected at must also be governed precisely. This demand for ...


    By Modern Pumping Today

  • Keeping Everything Flowing - How process technology from ProMinent secures optimal flow for industry

    Do you know about the flow? That warm and fuzzy feeling when everything is running perfectly? Transferred to the field of process technology, this ideal condition has been reached when all components within a processing plant interact perfectly with one another, when processes are executed efficiently, safely and economically and the system is capable of delivering its maximum productivity. To ...


    By ProMinent GmbH

  • Verderflex Dura Hose Pump Replaces Troubled Diaphragm Metering Pump - Case Study

    The Challenge A water treatment plant in the US state of Georgia uses several wells to provide its residents and industries with fresh water. Each well site had to be equipped with the appropriate treatment equipment to ensure that the water meets and exceeds regulatory requirements. One such well site used a diaphragm-style reciprocating metering pump to pump lime slurry directly ...

  • Magnetic driven pumps in Molten sulphur service case study

    MD51EFDKR-3U88/06C with NORD SK12XZ-140TC and Reliance 2 HP, TEFC-XE motor Pumping Molten Sulphur is most challenging. Sulphur temperatures must be controlled within a 120-155o C range. Outside this temperature sulphur solidifies. Sulphur has a distinct odour and is highly corrosive in the presence of moisture. Where leakage from common packed style pumps was unacceptable, a ROTAN ...


    By DESMI A/S

  • Qdos metering pumps selected by Russian automotive plant

    After a comprehensive evaluation and trial period, the Russian plant of steel wheel manufacturer, Mefro Wheels, has opted to use the latest Qdos 30 metering pumps from Watson-Marlow Fluid Technology Group at its facility in Togliatti. Selected ahead of diaphragm metering pumps, the Qdos 30 pumps have been fully integrated into a complex process control system at the plant’s ...

  • Is your metering diaphragm pump having self-priming problems? - Case Study

    Dosing sodium hypochlorite, fluoride, and alum There is a simple and 100% interchangeable alternative to solve your problems. Same footprint as competing diaphragm pumps. All ancillaries reused Mounting shelf Platform All suction and discharge piping Appurtenances like gauges and valves ...

  • Pump metering wastewater chemicals operationally effective and cost efficient

    Pumps are the heart of wastewater treatment systems and pump metering chemicals is critically imperative to required wastewater treatment! Different types of pumps are designed for unique wastewater treatment pump applications. Centrifugal pumps are used for general wastewater pumping. Positive Displacement pumps are used for pumping heavier solids. Chemical Metering Pumps are used for pump ...

  • Qdos metering pumps usurp diaphragm models

    The revolutionary new Qdos 30 metering pump from Watson-Marlow Fluid Technology Group is proving a resounding success in Barrie, Canada. Located in southern Ontario on the western shore of Lake Simcoe, Barrie is a modestly sized city (135,000 residents) but one with a track record for quality when it comes to its potable water supply. Here, the Water Operations Branch of the Corporation of the ...

  • Fluoridation: A Better Way? case study

    Ffficient, cost-effective addition of fluoride to drinking water is increasingly important as the U.S. EPA and Department of Health and Human Services contemplate additional nationwide standards for fluoride injection. A relatively new company, Integrity Municipal Services (IMS), has developed a new design for sodium fluoride saturator and feed systems and has successfully applied it at customer ...

  • Qdos metering pumps usurp diaphragm models in potable water application

    The revolutionary new Qdos 30 metering pump from Watson-Marlow Fluid Technology Group is proving a resounding success in Barrie, Canada. Located in southern Ontario on the western shore of Lake Simcoe, Barrie is a modestly sized city (135,000 residents) but one with a track record for quality when it comes to its potable water supply. Here, the Water Operations Branch of the Corporation of the ...

  • AquFlow (formerly Hydroflo) metering pump helps make fireproofing system a success

    Problem: Part of developing innovative technology is making its application as easy for the user as possible. So when W.R.Grace&Co.-Conn. went to market with an accelerator for its Monokote family of fireproofing products, a key priority was making the system user-friendly. The accelerator can save users money because it makes the product more efficient to apply and increases ...


    By Aquflow

  • Chemical metering pumps solve CP&L’s demineralization problem

    In order to solve a plugging problem in injection system of its coal-fired Lee plan in Goldsboro, NC, Carolina Power & Light Co. replaced the system with two chemical metering pumps. The two chemical metering pumps, made by Hydroflo Corp., have withstood continuous exposure to regenerating chemicals for almost ten years and have required minimal maintenance to the utility. Lee ...


    By Aquflow

  • Controlling the addition of Chlorine into a Process

    There are several methods for controlling the addition of chlorine into a process. These methods include flow proportional injection, ORP (oxidation reduction potential) or a residual chlorine analyzer. Each method measures a different process characteristic. Depending on the specific type of process being controlled, there generally is a best choice for controlling the injection of either ...


    By Walchem, Iwaki America Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you