industrial water industry Articles

  • Treating Industrial Water with Membrane Technology

    A variety of industries are finding that it makes sense to reevaluate the way they treat industrial process water, both to improve the quality of their products and increase the efficiency of their processes. Purification systems utilizing crossflow membrane filtration, such as reverse osmosis (RO), nanofiltration (NF) or ultrafiltration (UF) can be a good alternative to traditional filtration ...


  • Industrial Media Filtration Systems, Philippines

    INTRODUCTION In July 2013, Pure Aqua successfully manufactured industrial media filtration systems to a major company in Philippines to remove particulates, chlorine, organics, and odor from well water. The industrial media filtration systems were selected from our MF-1000 Series with 48" and 42" diameter ...


    By Pure Aqua, Inc.

  • Producing High-Purity Recycled Water for Industrial Applications with Microfiltration and Reverse Osmosis: Lessons Learned

    ABSTRACTThe East Bay Municipal Utility District (District), with the assistance of Black & Veatch, studied the feasibility of treating secondary and tertiary effluents using microfiltration (MF) followed by reverse osmosis (RO) to produce high-purity, recycled water for use as boiler make-up water at a local refinery. A pilot-scale test program was developed to demonstrate the ability of the ...

  • Paper Mill Water Closure: A Success Story

    Today the Pulp & Paper and Wood Products Industries are faced with tightening water quality and volume discharge regulations. Whether discharging to a local treatment facility or discharging to a river the economic impact is substantial. This article outlines a typical situation where the production facility utilized the latest expertise and most efficient  equipment to cost-effectively ...


    By World Water Works, Inc.

  • Using Nanofiltration in Beverage Production

    The following article is based on a paper presented in August, 1990 at the 21st Annual Meeting of the Fine Particle Society in San Diego. Soft drink manufacturers, not to mention manufacturers of other beverage products, have always had a keen interest in the water that goes into their products. After all, it is the water that typically makes up 80%-90% of the product. In the past the water has ...

  • Evaluating Spiral-wound Separator Performance

    Introduction The recent evolution of spiral-wound membrane element (sepralator) design brings an increased need to understand the intricacies of testing, operating and predicting performance of this most popular crossflow membrane design. After over a decade of stagnant development, the last five years have produced several innovations, which diversify and expand the applications as well as ...


  • Hyde ultrafiltration for tumbling/vibratory deburring applications

    Challenge Fabrication manufacturer has an issue with discharging tumbling water from two vibratory deburring systems. Customer Hartzell Manufacturing Industry Medical, Electronic and Bank Security Product Hyde Ultrafiltration System Business Benefits Realized ...


    By PRAB, Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you