Municipal Sludge Manufacturers, Suppliers & Companies (Water And Wastewater) Serving Sierra Leone
-
Manufacturerbased in Munich, GERMANY
Küttner and Martin have long-standing experience as plant manufacturers in their respective fields of activity. KÜTTNER contributes fluidized-bed technology, tried and tested for the thermal treatment of sewage sludge, as well as expertise in the ...
-
Manufacturerbased in Olsztyn, POLAND
ENOX Sp. z o.o. ?is an engineering and executive company established to develop and implement solar drying technology for sewage sludge. The proposed solution was developed by a team of specialists from the University Research Center of the Warsaw ...
-
Manufacturerbased in Guangzhou, CHINA
Guangzhou SHINCCI Energy Equipment Co., Ltd has been devoting to the research & application of drying technology in the field of environmental protection for 14 years. Nowadays SHINCCI grows into a national high-tech enterprise with 60 innovative ...
Low Temperature Sludge Drying Solutions
The Low Temperature Sludge Dryer made by SHINCCI can directly reduce sludge moisture from 83% to 30%-10% as per specific requirement, with volume reduction by 67%, weight reduction by 80% and sterilization rate by 90%. It is energy-efficient and ...
CONTACT SUPPLIER -
Manufacturerbased in Clausthal-Zellerfeld, GERMANY
The new established aquen GmbH is your partner for technologies of municipal and industrial sludge treatment and separation processes. As a young start-up company originated by the Clausthaler Umwelttechnik-Institut GmbH, we are helping our ...
Model FlocSens - Flocculated Particles Monitoring Sensor
So far, there has been no method available for the reliable assessment of flocculated particle systems. The monitoring and control of dewatering processes through assessment of the flocs was thus not feasible. On the other hand, the quality of the ...
CONTACT SUPPLIER -
Manufacturerbased in Shizhong District, CHINA
Jinan Niutech Environment Technology Corporation, awarded China highest honor of China National Science & Technology Progress Award, founded in 1980s at Jinan, Shandong, the very first company specialized in high polymer waste, such as waste tyre, ...
-
Manufacturerbased in Dollard-Des-Ormeaux (Montreal), QUEBEC (CANADA)
Don’t waste the waste, use DDI energy recovery. DDI Heat Exchangers Inc. provides an innovative approach in heating recovery using DDI patented 'rectangular, square, cube' TM heat exchangers. Among the applications of this technology are: ...
-
Manufacturerbased in North Vancouver, BRITISH COLUMBIA (CANADA)
Optifloc Systems Ltd (Canada) is the exclusive manufacturer and worldwide distributor of the Optifloc mixers. Optifloc mixers provide high-shear dynamic in-line mixing for a range of chemical processes, and are the industry standard for use in ...
-
Manufacturerbased in Otsego, MICHIGAN (USA)
The Prime Solution to your dewatering needs is the Rotary Fan Press; Made in the USA, meets all requirements of the American Recovery and Reinvestment Act (ARRA) and currently over 80 installations worldwide. Prime Solution Inc. manufacture the ...
-
Manufacturerbased in Dinuba, CALIFORNIA (USA)
Warren & Baerg Manufacturing is an international organization serving densification needs worldwide. We are proud of our quality equipment and our reputation for service. Today, service is more important than ever, and our commitment to service ...
-
Manufacturerbased in Niefern-Öschelbronn, GERMANY
Bellmer is an international high-class technology supplier with two divisions: Paper Technology focused on paper & board machines and Separation Technology for water and sludge treatment. Our family-owned company, founded 1842 in Germany, is ...
Akupress - Model BX LL - Screw Press
For municipal sludge dewatering applications, we offer the AKUPRESS BX LL-Ls type screw press. Here we build on the experiences gained from more than 700 AKUPRESS units sold and delivered. This press for municipal use is a further development of the ...
CONTACT SUPPLIER -
Manufacturerbased in Fusignano (Ravenna), ITALY
OCM has been active since 1963 on the market of pollution control equipment and processing of stainless steel in general. Our main markets (besides Italy) are Europe, Latin America, Middle East, Far East, Africa. As concerns belt presses, OCM ...
-
Manufacturerbased in Brookfield, ILLINOIS (USA)
For over 40 years, Tenco Hydro has specialized in the design and supply of wastewater treatment solutions for industry and municipalities. Tenco Hydro designs are based on physical/chemical processes including chemical conditioning, neutralization, ...
-
Manufacturerbased in Søborg, DENMARK
Krüger is specialised within the field of drinking water, process water, municipal and industrial wastewater, sludge, sewage, soil and groundwater as well as control, regulation and supervision of water treatment plants. Krüger is owned by Veolia, ...
-
Manufacturerbased in Wolfurt, AUSTRIA
Reliable solutions for commercial success. Since 1992. If you want to treat organic waste or purify highly contaminated waste-water and gain energy at the same time, you need well-engineered solutions. AAT Offers such solutions for the industry, ...
Project Management
For new construction and extensions to agricultural biogas plants (including co-substrates and energy corps), plants for organic waste disposal, municipal sludge treatment, industrial waste sludge fermentation and wastewater treatment plants AAT ...
CONTACT SUPPLIER -
Manufacturerbased in Neenah, UNITED KINGDOM
Minergy specializes in the vitrification, or melting, of waste materials. Minergy has successfully commercialized technologies for recycling high-volume wastes, including auto shredder residue, mine tailings, municipal sludge, paper mill sludge, and ...
Minergy - Model LWA - Lightweight Aggregate
Minergy’s LWA production facility was constructed as a means to beneficially reuse coal combustion fly ash from a power plant located in Oak Creek, Wis. LWA was commercially produced between 1994 and 2000, at which time the properties of the ...
CONTACT SUPPLIER -
Technologybased in Austin, TEXAS (USA)
GLOBAL WATER & ENERGY (GWE), is industrial wastewater treatment, water reuse, and green energy solutions provider to the global marketplace. To that end, GWE offers state-of-the-art technologies to assist industries and private owners in their ...
-
Manufacturerbased in Bibra Lake (Perth), AUSTRALIA
Spirac provides solids material handling solutions for municipal wastewater and industrial applications. Municipal screening, grit and sludge handling are our primary focus, but SPIRAC also offers conveying, dewatering and washing equipment for ...
-
Manufacturerbased in Akko, ISRAEL
GES is an international leader in the design and construction of innovative Sea Water Desalination and industrial and municipal Water and Wastewater Treatment plants, operating worldwide. With vast experience of over 25 years GES provides full scope ...
-
Manufacturerbased in Jiaozuo City, CHINA
China ZJN Environment Protection Science&Technology Company Co.ltd. has been focusing on drying technologies for more than 30 years, with over 100 patents, techonological knowhows, money-saving turnkey solutions and consultancy. China ZJN Rotary ...
-
Manufacturerbased in Thetford Mines, QUEBEC (CANADA)
Fournier Dewatering offers the best dewatering solutions for all types of sludges and slurries. The capability of being able to offer the Rotary Press or the Filter Press allows us to offer a solution ideal for each unique application : Mining ...
Fournier - Model OPTIMUM-CV - Single Channel Rotary Press
Fournier Industries Rotary Press technology is at the forefront of municipal and industrial sludge dewatering, the result of continuous improvement and ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you