Only show results available in Virginia? Ok

Oil-in-Water Monitoring Applications

  • Remedial Construction for Former Oil Field Production Sites

    - Remediation of 600 former production or release sites transecting four counties - Treatment of over 500,000 cubic yards of petroleum impacted soils from the various site areas in an 8-acre bioremediation landfarm - Remediated soils are then re-used as backfill throughout the disturbed areas

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Oil Water Separation / Water Treatment - Chemical Reduction

    Adding Wilsa ElectroWaveTM technology to existing separation or water treatment can help reduce or eliminate chemical use. The Wilsa Effect can often take the place of surfactants, demulsifiers, sacle inhibitors and biocides to enhance separation and clarification.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Determine Saybolt Color #3067

    Accurate online saybolt measurements from zero to +36. - Quantify yellowness for manufacturing control and product uniformity. - Ensure your product meets customer expectations - Detect potential cross-over contamination in fill or supply lines in real-time - Take the guess work our of product appearance standards - Application Note #3067

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Kytola Oilan A4 for Paper Machine Circulating Lube Systems

    Searching for a solution to monitoring the water in your oil. Our on-line oil water content analyzer instantly shows changes in the lubrication oil water content. OILAN A4 detects water leaks in their early stages and helps to prevent expensive failures and down time of the lubricated machinery and Equipment. This Equipment measures the water content above the saturation point.

    By Kytola Instruments Oy based in Muurame, FINLAND.

  • Continuous Monitoring of Wastewater

    The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

    By SORBISENSE based in Tjele, DENMARK.

  • Premium

    Measurement of hydrogen in fuels for oil & gas industry

    The combustion properties of fuels are key to the efficient and safe operation of engines used in machinery and plant. One important way to measure the combustion properties of a fuel is by its hydrogen content. The measurement of hydrogen content is widely used for the characterisation of aviation fuel but with the increasing costs of all fuels and the greater incentives for fuel adulteration, this test is increasingly being adopted for non-aviation applications. Our benchtop NMR analyser MQC-23 system is widely used for the measurement of hydrogen in fuels in accordance with ASTM D7171-05.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Mercury analysis for wastewater

    By Analytik Jena AG based in Jena, GERMANY.

  • Premium

    Raw water monitoring

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    Continuous emissions monitoring for palm oil plants

    Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several locations.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Flow Measurement instrumentation for superior natural gas measurement & control

    Precise measurement of natural gas requires high accuracy, low pressure drop and direct mass flow reading—all the hallmarks of Sierra’s immersible thermal, mass vortex and thermal mass flow controllers. Our mass flow controllers are ideal for natural gas flow measurement with 100:1 turndown and no moving parts, providing a robust MFC solution. Our natural gas flow measurement instruments can also handle liquefied natural gas (LNG) via our cryogenic mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR Online Odor Monitoring

    ontext & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. Odors are very distinct air contaminants as they generate nuisances. The factors playing a role in the determination of odor annoyance are: odor concentration and intensity, frequency, appreciation, duration, synergy and location. CHROMATOTEC® proposes an automatic solution to well identify the origin and the level of odors.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • In-situ Calcite Crystallisation Monitoring

    Calcite cristallisation reactions, commonly known as "scaling" events, are monitored in-situ using a portable field spectrophotometer with fibre optical probe accessory.

    By WAT Australia Pty.Ltd. based in West Australia, AUSTRALIA.

  • Water discharge monitoring for retention tanks

    Leakwise detects oil buildup in retention tanks at the end of the treatment process and prevents the discharge of oily water into the environment.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Water measurement systems & sensors for rainfall intensity logging

    ISODAQ telemetry systems are low-cost and very ease to use and configure, enabling you to bring your field data to your desktop PC without needing to operate complex IT infrastructure.

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Oil in Water Monitoring

    Detection of hydrocarbons within both water sources and effluent intake to Waste Water Treatment Works is an increasing requirement. The UviLux Hydrocarbon fluorometer detects hydrocarbons in water at very low concentrations. This in-situ fluorometer provides a rugged sensor which can be deployed in a wide variety of configurations. The UviLux is part of the Lux range of CTG fluorometers, and can be provided with a number of options with regard to signal protocols, and has available accessories to enable in-flow monitoring as well as inclusion within portable systems for taking measurements in the field.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you