Bilge Water Equipment
-
Manufactured by Compass Water Solutions (CWS)based in USA
Three-stage coalescer-type system. Removes non-soluble oil, solids, and entrained air from an oily water solution. 20 gallons per minute (0.5 m3/h). Continuous and intermittent operation. Automatic control capability for discharging accumulated ...
-
Manufactured by Compass Water Solutions (CWS)based in USA
ULTRA-SEP G Series Bilge Water Separators meet your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight. G Series provide the same. Positive Physical Barrier and continuous less than 5ppm discharge as Compass Water Solutions larger. ULTRA-SEP systems but in a more compact ...
-
Manufactured by Compass Water Solutions (CWS)based in USA
ULTRA-SEP is a two-stage system. The fi rst stage effi ciently removes free oil using our HELI-SEP coalescing matrix separator, which is familiar to ship operators worldwide, with more than 20,000 in service around the world. The second stage SPIR-O-LATOR technology provides a positive physical barrier to break emulsions and provide continuous less than 5ppm discharge. In fact, oil cannot ...
-
by Jowa ABbased in SWEDEN
Jowa Oily Water Separator is available in five different capacities; 0.5 m3/h, 1.0 m3/h, 2.5 m3/h, 5.0 m3/h and 10.0 m3/h. The skid is optimised so that the footprint of the 3SEP OWS is as small as possible. The 1m3/h model pictured has a footprint of only 950 x ...
-
Manufactured by Compass Water Solutions (CWS)based in USA
ULTRA-SEP C Series Bilge Water Separators meet your need for a small unit with a lower capital cost. Ideal for engine rooms where your installation space and budget are tight. C Series provide the same Positive Physical Barrier and continuous less than 5ppm discharge as Compass Water Solutions larger . ULTRA-SEP systems but in a more compact ...
-
Manufactured by RWO GmbH Marine Water Technologybased in GERMANY
The Clean Bilge Monitoring system CBM+ is designed to monitor and control liquid discharges overboard your vessel in respect of its oil content. The system prevents the discharge of non-compliant oily water mixtures by automatically recirculating the liquid to the bilge water tank if the oil content is above a predetermined ...
-
Manufactured by SkimOil, LLCbased in USA
This bilge water extraction system is a filtration vessel containing a patented high-absorption capacity media for oil and grease removal — effectively removing oil from bilge water to as low as 5 ppm — well below environmental and USCG required ...
-
Manufactured by SkimOil, LLCbased in USA
Skimoil’s BilgeVAP is a partial answer to the marine waste water management requirements presented by the new EPA enforcement of the Clean Water Act. The BilgeVAP by Skimoil evaporates away the water portion of oily bilge water, gray water and even treated black water ...
-
Manufactured by B&P Water Technologies s.r.l.based in ITALY
sewers take advantage of available natural slope in the terrain and are most economical in flat sandy soils with high ground water. B&PWater Technologies developed its own technology for the suction and transfer of ...
-
Manufactured by Environmental Protection Engineering S.A. - EPE S.A.based in GREECE
POSEIDON FIT Bilge Oil Water Separator consists of two stages; the coalescer and the emulsion breaking unit. The coalescer works on a continuous mode, by passing the second stage, and only when the oil detection monitor detects at the effluent of the coalescer oil content higher than 4ppm, then the emulsion breaking unit begins its operation. ...
-
Manufactured by Environmental Protection Engineering S.A. - EPE S.A.based in GREECE
POSEIDON EC Bilge Oil Water Separator consists of two stages; the coalescer and the electrolytic emulsion breaking unit. The coalescer works on a continuous mode, by-passing the second stage. If the detection monitor senses content higher than 4ppm at the effluent of the coalescer oil, then the emulsion breaking unit begins its ...
-
Manufactured by Pan America Environmental, Inc.based in USA
The BOWTS Series Bilge and Oily Wastewater Treatment Systems are designed to implement a wide variety of flexible chemical/physical treatment scenarios to fit shipping and naval treatment requirements for shore-side treatment installations. In the reduction of emulsions, solids, metals, oils and fuels chemistry is important and ...
-
Manufactured by Environmental Protection Engineering S.A. - EPE S.A.based in GREECE
POSEIDON EVO unit contains two stages, the coalescer and the emulsion breaking unit. The coalescer works on a continuous mode and only when the oil detection monitor detects at the effluent of the coalescer oil content higher than 14ppm, the emulsion breaking unit begins its operation. The unit contains an effective hydrocarbon absorption material which ensures an excellent effluent quality with ...
-
Manufactured by UC Marine (China) Co., Ltdbased in CHINA
15 ppm Bilge Alarm Monitor serves to continuously measure the concentration of oil in the bilge and other waste water produced on a ship, and produces an alarm signal when the oil concentration exceeds 15 ...
-
Manufactured by RWO GmbH Marine Water Technologybased in GERMANY
guidelines for »Integrated bilge water treatment systems« (IMO MEPC.1/Circ.642), RWO has developed the Bilge-Economiser. The Bilge-Economiser allows ship operators to discharge so called »clean drains« overboard without any further treatment. As a consequence the bilge ...
-
Manufactured by RWO GmbH Marine Water Technologybased in GERMANY
The most commonly used oily water treatment systems use gravity to separate water from oil and solids. They are based on the principle of coalescence. Coalescers bind smaller and minuscule droplets of oil into oil droplets, which then rise faster in accordance with Stokes‘ law. Coalescing elements, on the surface of which the finest ...
-
Manufactured by HSN-Kikai Kogyo Co., Ltd.based in JAPAN
The smallest installation space of bilge separator in the worldThe front face is open to facilitate easy servicing and inspection. Piping including the bilge inlet and treated water outlet face the same direction for easy installation. The biggest advantage is its compact design, which allows existing bilge separators to be ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Fuel bladder tanks are ideal for temporary storage of gasoline, diesel, jet fuel, oils and other hydrocarbon based petroleum products. These collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Material: Polypropylene caps and outer shell filled with oil-block absorption media. Removal of: free, dispersed and emulsified ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Fuel bladder tanks are ideal for temporary storage of gasoline, diesel, jet fuel, oils and other hydrocarbon based petroleum products. These collapsible tanks are compact, lightweight, durable and easy to deploy. They can be used for a variety of commercial and industrial refueling or storage applications. Manufactured using heavy-duty nylon coated geomembrane materials, our rugged and dependable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you