Lubrication And Wear Equipment
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Forceful spray that provides rapid penetration through rust and corrosion to loosen frozen nuts, bolts, and mechanical parts. Provides effective lubrication over a broad temperature and pressure range. Safe on aluminum, plastic, and paint. Contains moly and polytetrafluoroethylene for superior lubrication and wear reduction. Provided with ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Sprays as an instant foaming, deep penetrating liquid that flows inside intricate chains and cables where the greatest stress occurs. Provides a thick foam that clings to vertical surfaces. As foam breaks, lubricant penetrates into wire rope, rollers, pins, links and bushings of chains. Leaves a lubricating film, which reduces friction, ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
Monitoring lubricant condition in machine wear when and where it is needed significantly reduces the time required for laboratory analysis and improves machine reliability. Spectro Scientific offers a wide range of portable devices with field simplicity and lab accuracy. The product combinations are powerful for different applications as ...
-
Manufactured by Dynamic Sealing Technologies, Inc.based in USA
The EST Series thru-bore slip rings feature a 1.5 inch thru-bore for shaft mounting or fluid transfer and incorporate low-wear, fiber brush contacts. EST slip rings do not require lubrication and produce virtually no wear debris. Models are available in 6, 12, 18, and 24 circuits. Ethernet options also ...
-
Manufactured by Greene Tweedbased in USA
and spiral failure while ACT® ring options are designed with converging slides to promote lubrication for reduced friction and wear. Greene Tweed’s engineers will work with you to develop a custom designed T-seal assembly suited to your ...
-
Manufactured by Cumberland Vacuum Products Inc.based in USA
CVP-130 is a hydrocarbon fluid specially formulated to resist sludge and varnish formation in vacuum pumps operating under more demanding pumping applications. Along with excellent water separation and filterability properties, this fluid offers good lubrication and less internal pump wear increasing pump life and reducing ...
-
Manufactured by PAMAS - Partikelmess- und Analysesysteme GmbHbased in GERMANY
Particle counter for the remote on-site analysis of fluid samples – pressureless sampling and up to 420 bar system pressure testing. The PAMAS S40 is a portable particle counting system for oil-based liquids like hydraulic and lubricating oil. A wear resistant ceramic piston pump guarantees a constant flow. With a simple-to-use touch ...
-
Manufactured by Vesco Plastics Sales, Pty Ltdbased in SOUTH AFRICA
Developed to solve wear problems in unlubricated and dirty applications, Vesconite Hilube is a premium long life, low maintenance plain bearing material, which also gives outstanding performance when lubricated. Vesconite Hilube is compounded from an advanced engineering thermoplastic incorporating a PTFE internal lubricant. It has a very ...
-
Manufactured by Ducom Instruments (USA) Inc.based in USA
The four-ball test is a fast, repeatable and an accurate way to test lubricants for their wear preventive, extreme pressure and frictional properties. With high levels of automation, the FBT-3 makes this test easy to run. Its simple interface hides powerful features and technologies. A patented friction measurement system, automated ...
-
Manufactured by Main-Metall International AGbased in SWITZERLAND
Versatile self-lubricating wear plates for standard ...
-
Manufactured by Garland Manufacturing Companybased in USA
GAR-DUR plastic parts are made from ultra high molecular weight (UHMW) polymer having a molecular weight of 4.2 million and greater. Garland Manufacturing Company has been processing UHMW resin for over 45 years. This true UHMW polymer is excellent for resisting abrasion and corrosion while contributing a low coefficient of ...
-
Manufactured by Flux Pumps Intern. (UK) Ltd.based in UNITED KINGDOM
Pre-assembled pump kit to pump high flammable media out of 200 l drums or IBCs. Comprising drum pump F 424, outer tube in stainless steel, hose, hand nozzle and compression gland. As drive either the commutator motor F 460 or compressed-air motor F 416 are ...
-
Manufactured by Dayton Lamina Corporationbased in USA
Custom Lengths up to 24" for series 62 & 100 - Custom Lengths up to 36" for series 150, 200, 250, and 300. Rockers are 87° angles and are made from S-7 tool steel – fully hardened to Rc 54 minimum. Saddles are A-2 tool steel - fully hardened to Rc 48-52 with coated saddle bore for lubricity & wear resistance – ...
-
Manufactured by Christos Vakalopoulos & Co.based in GREECE
Tank truck pump 3″ type VP30; Rotary vane – ATEX – pump suitable for the transport of liquids in tank trucks. Such as liquid fuels, lubricants, oils, jet fuels, gasoline, edible oils and various solvents and diluent such as esters, ketones, naphtha, ether, amine, aromatics, alcohols, glicol, hexane and many others. The ...
-
Manufactured by Bauer Compressors, Inc.based in USA
1 and 2 stage boosters for air and nitrogen available in three different models. The new Vertical Booster series from the technology leader in high pressure offers space-saving designs suitable for the most demanding requirements. Open models offer a budget conscious practical solution while enclosed models can be installed in occupied spaces. Both styles include a full-featured control system ...
-
Manufactured by American Chemical Technologies, Inc. (ACT)based in USA
FR WG 200-D is a premium, water-glycol, fire-resistant hydraulic fluid that has superior lubricating properties and meets all requirements for a less hazardous fire resistant hydraulic fluid. In addition to its excellent fire-resistant properties, FR WG 200-D contains a proper additive balance to impart the necessary lubricity, ...
-
Manufactured by Plasmait GmbHbased in AUSTRIA
PlasmaANNEALER is a heat treatment machine for stainless steel and nickel alloy wire, rod, tube, rope, and strip. Plasma heat treatment can be used for annealing, stress relieving or hardening ...
-
Manufactured by KSB Groupbased in GERMANY
KSB’s RESIDUR ceramic bearings – robust plain bearings for all tubular casing pumps. KSB’s maintenance-free, wear-resistant RESIDUR ceramic bearings are able to cope with continuously high loads and demonstrably reduce the life cycle costs of your ...
-
Distributed by Fedoz Nigeria Limitedbased in NIGERIA
methods of lubrication available. Replaceable wear rings for casing and impeller. Fan cooling ...
-
Manufactured by Selden Research Limitedbased in UNITED KINGDOM
Does not contain chlorofluorocarbons. Excellent stability, builds to a workable grease. Lubricates mechanical hinges and contact parts. Penetrates inaccessible areas and thickens to a high quality lubricant. Eliminates squeaks, reduces wear and prevents ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you