Environmental Industry Equipment In Virginia
-
ShowcaseManufactured by Landustrie Sneek BVbased in NETHERLANDS
The efficiencies that can be obtained with low speed aerators depend on a number of factors. One important factor is the geometry of the basin in which the aerator will be installed. The Landy aerator can be installed in either a fixed or a floating arrangement. Regarding the geometry of the basins the options are virtually unlimited: square or rectangular tanks, round tanks, shallow or deep ...
-
ShowcaseManufactured by Sauereisen Inc.based in USA
Sauereisen SewerGard 210FS is a fast-setting epoxy material for use in municipal wastewater environments. This lining protects concrete surfaces from chemical attack and physical abuse. It is particularly useful for protection of manhole benches, inverts and other structures subject to very little maintenance ...
-
ShowcaseManufactured by Finn Corporationbased in USA
Designed with time-tested features, the T330 HydroSeeder offers value, reliability and productivity to meet the needs of large-scale applications. The T330 features the highly efficient FINN proprietary centrifugal slurry pump with a 134hp John Deere diesel engine and an independently controlled pump ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs GPS-Aided Inertial Navigation System (INS-U-OEM) is OEM version of new generation, fully-integrated, combined GPS, GLONASS, GALILEO, QZSS and BEIDOU GNSS and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, Velocity and Orientation are ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The INS was unveiled in 2001 when Inertial Labs started manufacturing its first MEMS-based, IP67 and IP68 sealed and OEM versions, MIL-STD-810G qualified multiple interfaces and COM ports Single and Dual Antenna GPS-Aided Inertial Navigation Systems (INS). Each INS contains an Inertial Labs developed Tactical or Industrial-grade Inertial Measurement Units (IMU) and reliable single or dual GNSS ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Miniature Inertial Labs Attitude and Heading Reference System, miniAHRS is a high-performance strapdown system that determines absolute orientation (heading, pitch and roll) for any device on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Single and Dual Antenna GPS-Aided Inertia I Navigation System — INS is a new generation of fully-integrated, combined GPS, GLONASS, GALILEO, QZSS, BEIDOU and L-Band navigation and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The MS-IMU3025 MEMS Inertial Measurement Unit delivers standout inertial performance in an ultra-compact package. The tactical gyro bias instability and sub seven micro-g accelerometer bias instability supply ample inertial performance to support a wide range of applications from inertial navigation and control to precision platform stabilization. User configurable options allow the IMU to be ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
INS-BU-OEM: Low Cost Ublox Based GPS-Aided Inertial Navigation System Utilizing ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Railway Motion Control Unit – RMCU is a high-performance strapdown system developed for Railway applications to determine the absolute orientation (Heading, Pitch, and Roll) and motion parameters (Angular Rates and Linear Accelerations) for any Railway Platforms on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs GPS-Aided Inertial Navigation System (INS-DM) is the latest version of Inertial Navigation System, developed by Inertial Labs. The INS-DM is the result of over 20 years of our experience in developing and supplying INS solutions to land, marine and aerial platforms around the ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs MEMS KERNEL Inertial Measurement Units & Digital Tilt Sensors are the second generation of the Inertial Labs KERNEL Miniature MEMS sensor-based family. Revolutionary due to its very compact, self-contained strapdown, industrial-grade Inertial Measurement Systems that measures linear accelerations and angular rates with three-axis MEMS accelerometers and three-axis MEMS ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs ADC is one of the most lightweight, cost-effective, and efficient solutions. Its compact form makes it easy for users to integrate into existing UAV systems with stringent size and weight requirements. The ADC calculates the air data parameters from information received from the integrated pitot and static pressure sensors and an outside air temperature ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
RESEPI™ (Remote Sensing Payload Instrument) is a sensor-fusion platform designed for accuracy-focused remote sensing applications. RESEPI utilizes a high-performance Inertial Labs INS (GPS-Aided Inertial Navigation System) with a tactical-grade IMU and a high-accuracy single or dual-antenna CNSS receiver, integrated with a Linux-based processing core and data-logging software. The platform ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertia I Labs GPS-Aided Inertia I Navigation System (INS-B-OEM) is OEM version of new generation, fully-integrated, combined GPS, GLONASS, GALILEO and BEIDOU GNSS and high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, Velocity and Orientation are ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Attitude and Heading Reference Systems, AHRS-II is the next generation of enhanced, high-performance strapdown systems that determines absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Orientation is determined with high accuracy for both motionless and dynamic ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs MEMS TAA-308, TAA-315, and TAA-340 are revolutionary, compact, self-contained, strap-down, Navigation-grade Accelerometers that measure linear accelerations with high precision due to their unique design and developed by Inertial Labs over the last twenty years of significant knowledge and techniques in calibrations of inertial sensors. Measured by TAA Accelerometers, ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The Inertial Labs Optically enhanced Weapon Orientation Module - OptoWOM -II, is Inertial Labs' second generation of its Optically Enhanced Weapon Orientation Module. OptoWOM™-II combines technologies of inertial sensors with optical image tracking resulting in a robust and reliable 3DOF orientation module capable of operation in virtually any environment. With the addition of optical image ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
Inertial Labs has developed a professional version of Motion Reference Units (MRU-PD) to meet the requirements from marine and hydrographic applications. The MRU-PD is an enhanced, high-performance strapdown Motion Sensor - affordable solution for survey, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it ...
-
PremiumManufactured by Inertial Labs, Inc.based in USA
The INS was unveiled in 2001 when Inertial Labs started manufacturing its first MEMS-based, IP67 and IP68 sealed and OEM versions, MIL-STD-810G qualified multiple interfaces and COM ports Single and Dual Antenna GPS-Aided Inertial Navigation Systems (INS). Each INS contains an Inertial Labs developed Tactical or Industrial-grade Inertial Measurement Units (IMU) and reliable single or dual GNSS ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you