Only show results in Virginia? Ok

Oil-In-Water (Oil-in-Water Monitoring) services

  • Hydrocarbon and Oil Containing Water and Wastewater

    AWAS has focused on this topic for over 40 years and during this time has evolved, mostly for industry, a wealth of technical separation systems. AWAS asserts to have addressed many of such challenges in the world, successfully resolved them and has set new environmental milestones for the protection of water and environme

    By AWAS International GmbH based in Wilnsdorf, GERMANY. from Solutions Service line

  • Oil Water Separators Services

    Let us spec out your oil water separator needs. Free!. Traditional above and below grade systems rated for either traffic or non-traffic activity. Ask about our patented liquid/liquid extraction separators. Not only does it separate free oil from water but it strips soluble material as well. Removing or reducing contaminants to desired ...

    By Environmental Process Systems Inc. (EPSI) based in Willow Spring, NORTH CAROLINA (USA).

  • Oil/water Separators

    Water contaminated by oil, grease and fat is a growing problem as this combination can clog drains, pumps, wastewater treatment systems, etc. WRG assists with the specification selection, supply and installation of effective low cost separation units for such problems. With increasing environmental authority regulations and the need to upgrade ...

    By Water Recycle Group Australia (WRG) based in Canberra, AUSTRALIA.

  • Oil-Water Separation

    Oil is used in many fields of industry. The use of micro/nano bubbles is a very effective way for facilitating separation by floatation. In general, it is very difficult to perfectly separate oil from water because part of the mixture is often emulsified. The use of micro/nano bubbles can accelerate the breaking of emulsion, inducing not only ...

    By BL Dynamics Inc (BLD) based in Yokohama, JAPAN.

  • Oil Water Separator Services

    Find oil water separator services including a broad array of consulting, engineering, design, and deployment. Industrial and large commercial systems encompasss municipalities, industrial, or government facilities. 

    By Mohr Separations Research, Inc. (MSR) based in Lewisville, TEXAS (USA).

  • Oil/Water Analysis Services

    Not only can we test and report oil/water properties, we can help you understand the results in context of your process impact, system design, and operation economics.

    By EcoNova, Inc. based in Clearfield, UTAH (USA).

  • Gas, Oil, Water Installation Services

    ISI has completed installation of stationary pumping structures, floating barge pumping systems, pumping and transfer stations, large city municipal water storage tanks and process tanks and systems for other utilities and industries.

    By Industrial Systems, Inc. based in Delta, COLORADO (USA).

  • Oil / Water R&D Facilities

    Alongside our Research & Development engineers, we have a dedicated in-house team who specialise in the commercialisation of our ideas, ensuring the final product is smaller, lighter or simply better than anything else on the market. We're continually working on new ideas; passing on our developments to our clients and partners. Similarly, we ...

    By DPS Global based in Portishead, UNITED KINGDOM. from Water Treatment Service line

  • Oil/Water Separation and Sediment Control Services

    The separation of liquid-liquid and solid-liquid dispersions is a problem encountered in many industrial and commercial situations. Watercom Engineering has been involved in the selection and design of separators in applications ranging from commercial and industrial parking lots to power station drainage systems and other facilities.

    By Watercom Engineering based in Toronto, ONTARIO (CANADA). from Water Resources Engineering Services Service line

  • Oil/Water Separator Clean-Out Services

    CSI can provide cleanout of your existing OWS in the field to maximize effluent discharge levels and maintain performance of the OWS. Our technicians are OSHA 40-hour trained including confined space entry training and have experience in chemical tanks service.

    By Containment Solutions, Inc., (CSI) based in Conroe, TEXAS (USA). from Field Services Service line

  • water - Analysis

    test drinking and irrigation water and give recommedation

    By Crop Nutrition Laboratories ltd based in KENYA.

  • L8 Risk Assessment Services

    L8 Compliance All premises must have a current legionella Risk Assessment and this should technically be undertaken before the maintenance regime is put in place. Often this is not the case, but a Risk Assessment must still be undertaken so that the maintenance regime is checked and reviewed. The purpose of the Risk Assessment is: To decide if ...

    By Phase Technology Limited based in Ropley, UNITED KINGDOM. from Water Service line

  • Thermal Imaging Petrochemical Testing

    Our thermal imaging services have been a proven method to increase asset safety and save offshore companies thousands of pounds a year in rig and installation downtime by the early detection and prevention of electrical and mechanical incidents. Thermal imaging petrochemical testing  help to  avoid costly and dangerous emissions. ...

    By Ti Thermal Imaging Ltd. based in Weybridge, UNITED KINGDOM. from Oil & Gas Service line

  • Data Analysis & Inpterpretation Services

    Once the data has been generated, the data must be analysed and interpreted. Lorax Environmental’s skilled professionals take the data generated during field assessments and integrate any data that is available through the client’s databases and historical databases to develop a complete and clear interpretation.

    By Lorax Environmental Services Ltd. based in Vancouver, BRITISH COLUMBIA (CANADA). from Oil & Gas Service line

  • Construction Oil Analysis

    The nature of the construction industry means that machinery is prone to high levels of contamination. If these contaminants are not removed, they can lead to: Abrasion, corrosion, erosion, ultimately costly component failure.

    By Monition Limited based in Worksop, UNITED KINGDOM. from Oil Analysis Services Service line

  • Engine Oil Testing - Fresh Engine Oil Analysis

    Fresh engine oil analysis reveals the quality of new lube oil product. This test is conducted as per the standards prescribed with minimum and maximum limits for a best use mostly from standardization authorities and sometimes these are region specific. Fresh engine oil testing generally required by lube oil producers, lube oil sellers and lube ...

    By Accredited Test Laboratories based in Dubai, UNITED ARAB EMIRATES. from Lube Oil Testing Service line

  • Heavy Oil Exploration

    As the heavy oil industry continues to gain momentum, Orion 3D’s high-resolution DCIP & MT (magnetotelluric) images of the subsurface maximise oil recovery and reduce steam requirements. By measuring the resistivity difference between water, bitumen and rock, Quantec can pinpoint the location of bitumen versus water. Orion 3D collects ...

    By Quantec Geoscience Ltd. based in Toronto, ONTARIO (CANADA). from Oil and Gas Exploration Service line

  • Engine Oil Testing - Used Engine Oil Analysis

    Used Engine Oil analysis is conducted to check the current quality of oil being in use with engines. It is generally required whenever there is some malfunctioning or any harm occurred in engine and the results obtained from this test can reach the bud of the problem. Sometimes this test is only conducted to check whether lube oil is still good to ...

    By Accredited Test Laboratories based in Dubai, UNITED ARAB EMIRATES. from Lube Oil Testing Service line

  • Maxxam - Bitumen and Tailings Testing Services

    Maxxam’s Petroleum Division has testing labs specialized in bitumen and oil sands lab testing methods in Edmonton, Calgary and Fort McMurray, Alberta. Lab testing services are customized to meet the unique needs of SAGD and mining extraction operations. These petroleum labs are accredited by the Standards Council of Canada for many ASTM and ...

    By Maxxam Analytics based in Mississauga, ONTARIO (CANADA). from Petroleum and Oil Sands Service line

  • Water and Steam Flood Tracer Testing Services

    Injection, sampling and analysis of vapor and liquid-phase tracers to determine reservoir flow-paths, well connectivity and breakthrough. Services from project design through data interpretation: Enhanced Oil Recovery. Waterflood Tracer Testing. Steamflood Tracer Testing. Gas Breakthrough Testing. Injection / Production Well Relationships.

    By Thermochem, Inc. based in Santa Rosa, CALIFORNIA (USA). from Oil and Gas Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you