Oil Skimmers Applications available in Yemen
-
Premium
Gas analyzers for measuring acrylonitrile analysis in water
Monitoring of liquid matrices by Gas Chromatography using a simplified and enhanced headspace sampling system Chromatotec® presents a headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC analyzer. Speciation of sulfur compounds or VOCs is done with a MEDOR® ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Centrifuges for industrial waste water, minerals and oil industry
Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing oil ...
By Flottweg SE based in Vilsbiburg, GERMANY.
-
Industrial wastewater solutions for container cleaning wastewater
Flexible, turnkey solutions for container cleaning. Cleaning industrial containers such as canisters, vats or IBCs produce large volumes of effluent. The type of impurities in this effluent depends heavily on what has been transported in the containers. That’s why effluent treatment requires a flexible system able to cope with all conceivable contaminants. Reconditioners are increasingly using modern vacuum distillation systems to do this. They work fully automatically, guarantee a high level of process ...
By H2O GmbH based in Steinen, GERMANY.
-
Oil Pollution
Oil pollution is caused due to various reasons like contaminated rainwater runoffs or as a part of the production process. It can be water or land oil pollution. Oil is used in the manufacturing process of every industry as lubricants and cooling agents thus, contributing oil and grease to wastewater. Oil pollution has adverse effects on our environment hence it is important to control and recover oil through oily wastewater treatment and fats, oil & grease removal from ...
By Potential Engineering based in Navi Mumbai, INDIA.
-
Oil spill recovery
As the exploration for oil and gas enters areas of greater environmental vulnerability, the need for proven, reliable and robust equipment is doubly important. DESMI continues to answer this challenge with existing as well as specially developed oil spill recovery systems to operate in the most difficult and harsh environments known to man. This equipment is known as the ARCTIC range. This is a special tool kit of systems to enable you to successfully contain, recover and store hydrocarbons in the Arctic ...
By DESMI A/S based in Noerresundby, DENMARK.
-
Portable and fixed gas analysers for remediation and groundwater
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
By QED Environmental Systems based in Dexter, MICHIGAN (USA).
-
Industrial wastewater solutions for vehicle and transport cleaning water
Reliable and effluent-free: VACUDEST in vehicle and transport cleaning. Means of transport have to be one thing above all else: Safe. That’s why the vehicles regularly undergo strict quality checks. They are thoroughly maintained, serviced and repaired, and this of course also includes careful cleaning. Effluent is produced which, due to the high degree of contamination, cannot be discharged into the public sewer system. It contains oil, grease, detergent and other impurities. This effluent is very expensive ...
By H2O GmbH based in Steinen, GERMANY.
-
Evaporators for Mechanical Industry
Treating metalworking wastewater means the separation of oils, heavy metals and suspended solids, water reuse, disposal costs reduction and sustainability improvement. Mechanical workshops generate effluents containing lubricating oils with significant levels of COD (Chemical Oxygen Demand), hydrocarbons, metals and suspended solids. These workshop wastewaters may come from a variety of operations such as cutting and drilling, molding, cleaning of mechanical parts, paint shops, maintenance, drainages from settling ...
By EVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY.
-
Stainless Steel Skimmers for Storm Water & Non-Point Source Industry
The smart skimmer addresses the common problems of storm water and other non-point source application. Often in inaccessible locations, with unknown quantities and quality of product, the smart skimmer provides the ideal solution. The smart skimmer continually skims the surface of the sump accumulating any oil it encounters, when there is a sufficient accumulation of oil, the oil pump will turn on delivering only oil to the collection tank. No additional separator is required. Oil accumulation and removal ...
By Skim-pak based in Dublin, CALIFORNIA (USA).
-
Validation of Salt Water Disposal Well Treatment Plants with Handheld Oil in Water Sample Analyzer
Ideally, a continuous online monitor would be used for collecting data to determine upset frequencies, duration and normal conditions. Many of the SWD facilities and demonstration plants do not have a budget that allows for continuous monitoring. However, high frequency sample analysis can be performed on site, using a portable analyzer. Easy to use, low cost field analyzers, such as the TD-500D, are essential for optimizing the effectiveness of treatment systems during pilot studies and meeting a budget that ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Water Measurement Monitors for Monitoring Hydroelectric Dam Sumps
The Problem: To protect the river environment, the sumps at some advanced locations have oil in water separation systems and oil in water monitors. The installation of a TD-4100 series monitor in these applications is very simple. All that is needed is a properly plumbed sample stream and a way to drain the water back to the sump. A dry air supply is also needed to prevent fogging within the non-contact falling stream flow ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Decanter Centrifuges for Oil & Gas
Noxon's centrifuges have a proven track record in the oil & gas industry, for upstream and downstream applications, for drill mud as well as slop ...
By Noxon AB based in Fjärås, SWEDEN.
-
Wedge Wire Baskets for Centrifuges
We manufacture baskets on the basis of the Pro-SLOT® wedge wire screens for mechanical separation, dewatering, and enrichment processes for, among others, fine coal, salt, mineral materials, wastewater, oil, as well as sugar and starch. We offer a wide variety of baskets for most brands and models of ...
By Progress Eco S. A. based in Tuczepy, POLAND.
-
Chemical Detection Solutions for Oil and Gas Applications
A variety of amines can be found in oil and gas, both as constituents and as by-products of processes to remove H2S and/or CO2. Lonestar can detect the presence of amines in both crude oil and water backgrounds, allowing real-time monitoring of concentrations throughout the treatment ...
By Owlstone Inc. based in Westport, CONNECTICUT (USA).
-
Sewage Treatment/ Wastewater Treatment/ Effluent Treatment
An increase in population, industrialization, and rapid urbanization are some of the factors that have led to a shortage of freshwater across the globe. At the same time, these factors are responsible for discharging tonnes of volumes of sewage/wastewater each day. The sewage/wastewater contains pollutants that are harmful to the environment and thus, cannot be discharged without appropriate treatment. The entire process of sewage/wastewater treatment involves collection, pre-treatment, process treatment, and ...
By Potential Engineering based in Navi Mumbai, INDIA.
-
Oil skimmer solutions for steel plant sector
Scale Pit/Secondary Settling Tank/Waste Water Tank Tube Oilskimmer is used in most steel plants to remove waste floating oil We manufacture Tube Oil skimmers with swivel arm mast for oil Skimmer rotation 360 degrees. We have supplied and installed Tube Oil skimmer in all the reputed Still manufacturing units of India like JSW, JSW Oman, Bhilai Steel Plant, IISCO Steel Plant, Durgapur Steel Plant, etc. We have given our Oil skimmer performance customer review in the customer review column with person name, contact ...
By Premier Oilskim Systems Pvt. Ltd. based in Pune, INDIA.
-
Oil separation and removal systems for Military industry
In the military, there are various instances in which oil recovery and removal is necessary. From properly disposing of cooking oil from mess halls to effectively removing spilled or leaked oil from military airplane, ship, or tank fleets as well as other heavy equipment. As in many industries, oil from military applications is often mixed with water as a result of cleaning and washing ...
By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).
-
Oil separation and removal systems for Parts washing industry
In the parts washing industry, metal parts need to be thoroughly washed prior to being painted or coated to eliminate any oil that may be present on the metal and ensure the metal touts a clean surface. During the washing process, residual oil and grease is washed off the parts; however, in the process, it mixes with wash water, which is then collected in a containment ...
By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).
-
Industrial and municipal wastewater treatment solutions for transportation industry
Maintenance, fueling and staging areas generate wastewater whether the vehicles travel on roads, on rails or in the air. Transportation equipment needs maintenance. Facilities that do the maintenance create wastewater with high oil and grease content and solids that need to be removed or reduced before discharge to a POTW. Tenco has successfully treated wastewater from transportation facilities with API type and Clari-Pac C coalescing oil-water separators, Clarif-Float DAF, Skim-Kleen belt oil skimmers and ...
By Tenco Hydro, Inc. based in Brookfield, ILLINOIS (USA).
-
Innovative Pump Technology for Water and Wastewater Treatment
EDUR pumps have been used preferentially in municipal and industrial water supply and water treatment for decades. Traditionally the reasons are the sturdiness and the long service life of our pumps and the special capability of some models for transporting liquid-gas ...
By EDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG based in Kiel, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you