Only show results in Texas? Ok

Oil Spill Monitoring Applications

  • Premium

    Portable and fixed gas analysers for remediation and groundwater

    Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation process.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    UV fluorescence technology for monitoring once through cooling water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Marine monitoring solutions for the SO2/CO2/NOx monitoring

    Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Sub-ppm Oil in Water Testing

    InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings,...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Environmental sensors solutions for oil water cut sector

    Oil producers are facing the problem of rapidly increasing water content in oil from most of the producing wells. A reliable and rugged sensor which can provide an accurate indication of the percentage of water in the fluid pumped is the first step in reducing to a minimum the water content of the oil produced. Flo·Point™ provides real time measurement on the volume of fluid flowing through the pipe over the whole range of 0-100% water with +/-1% accuracy. The sensor can be installed in line from...

    By E.S.I. Environmental Sensors Inc. based in Sidney, BRITISH COLUMBIA (CANADA).

  • Water intake protection monitoring for wastewater treatment industry

    Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring industry.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Kytola Oilan A4 for Paper Machine Circulating Lube Systems

    Searching for a solution to monitoring the water in your oil. Our on-line oil water content analyzer instantly shows changes in the lubrication oil water content. OILAN A4 detects water leaks in their early stages and helps to prevent expensive failures and down time of the lubricated machinery and Equipment. This Equipment measures the water content above the saturation point.

    By Kytola Instruments Oy based in Muurame, FINLAND.

  • Monitoring Oil and Grease in Wastewater

    Real time information speeds processing and saves time in the treatment of water and wastewater. Get a measurement in a few minutes extracting oil from water using S-316 extraction solvent and measuring the oil content using a Model OCMA-550 NDIR analyze

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Laser detection solutions for environmental monitoring

    LDI laser remote sensing technology provides users with the tools to conduct broad and accurate environmental surveys of both water and ground in stressed environmental zones, which makes our products especially suitable for oil spill response operations. The technology is based on the Laser Induced Fluorescence (LIF) and realized by the Fluorescent Lidar Systems – FLS (LiDAR – Light Detection And Ranging).

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Environmental Monitoring Sensors and Systems for Ports & Coastal

    From Spain’s national tide monitoring network to storm surge detection in Korea, sea state monitoring and erosion protection in Japan to oil spill detection in India, Miros sensors and solutions help protect coastlines, ports and critical infrastructure all around the world.

    By Miros AS based in Asker, NORWAY.

  • Water quality monitoring for environmental industry

    Maintaining the quality of natural waters provides numerous economic benefits by preventing severe deterioration of water resources that would require expensive treatment operations to protect public health and the environment. For instance, monitoring nitrates in surface waters can possibly prevent algal blooms from happening by facilitating the necessary steps to stop pollution sources from discharging nitrogen nutrients into the water system.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • FT-NIR spectroscopy for the biofuels industry

    FT-NIR spectroscopy is a widely used technique that can do rapid and non-destructive measurements in seconds. This technique can achieve multiple analysis results per measurement and determine real–time chemical information at-line and in-line.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Determination of aromatic hydrocarbons in electrical insulating oils

    Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a transformer.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Chemical analysis and measurement solution for food and beverage process industry

    Control. Predict. Optimize. Real-Time process analysis for your food and beverage manufacturing.

    By Tornado Spectral Systems based in Toronto, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you