oil coalescer Articles

  • Series TJ Coalescence-separation Oil Purifier

    Series TJ Coalescence-separation oil purifier adopts advanced polymer fiber as the filter medium combined with the special oil-water separating device to make TJ is good at breaking emulsion and filtering. It can effectively separate water from oil. Series TJ can work online with turbine system for breaking emulsion and filtering, also it can separate particles and mass water from light oil. ...


    By rier oilpurifier company

  • Coalescence and Size Distribution Characteristics of Oil Droplets Attached on Flocs After Coagulation

    Abstract  The coalescence characteristics of oil droplets which are attached on flocs after coagulation is different from coalescence of droplets which are suspended in emulsions. The droplets attached on flocs are stationary and do not collide as those in emulsions. Objectives of this study were to investigate the change in size distribution of oil droplets that were attached on flocs ...


  • Research on the treatment of oily wastewater by coalescence technology

    Recently, oily wastewater treatment has become a hot research topic across the world. Among the common methods for oily wastewater treatment, coalescence is one of the most promising technologies because of its high efficiency, easy operation, smaller land coverage, and lower investment and operational costs. In this research, a new type of ceramic filter material was chosen to investigate the ...


    By IWA Publishing

  • Oil-Water Separator with New Coalescing Media Handles High Load Stormwater at HydroElectric Powerplant to Yield Zero Oil Discharge

    Background Removal of oil from water before the water is discharged into a river or other body of water is an important environmental goal. In order to accomplish this, a major hydropower producer in the southern United States contracted with HydroQuip, Inc.* for the supply of a state of the art oil/water separator. The power plant had several goals, but the most important was that in ...


    By Lantec Products, Inc.

  • Oil droplets and solid particles removal using circular separator with inclined coalescence mediums: comparison between co-current and counter-current flow

    This research investigated the effects of co- and counter-current flow patterns on oil-water-solid separation efficiencies of a circular separator with inclined coalescence mediums. Oil-water-solid separations were tested at different influent concentrations and flowrates. Removal efficiencies increased as influent flowrate decreased, and their correlationship can be represented by power ...


    By IWA Publishing

  • Kimre Inc. LIQUI-NOMIX oil-water separators

    Liquid - liquid mixtures of contaminant oils (or organic solvents) in water (or aqueous solvents) can be separated economically and efficiently with gravity settlers or decanters. To achieve high efficiency separations, the settling unit must include a coalescing stage for removal of small droplets of oil. Kimre Inc.'s LIQUI-NOMIX coalescers provide high efficiency polishing of liquid streams and ...


    By Kimre, Inc.

  • Starndard Batch Treatment of Free and Soluble Oil Wastewater

    Small and Medium metal-based manufacturing plants produce between 1,000 and 30,000 gallons per week of oil-laden wastewater. Typically, the oil load is less then 2,000mg/l as soluble oil. Free (globular) oil is typically removed by DAF, oil-water separator, or coalescer with the remaining soluble oil needing to be reduced to less then 100mg/l in order to discharge directly to the local sewerage ...


  • How Do I Get That Oil Out of There?

    It is a common question asked every day by people in all fields of industry. Machine shops, steel mills, industrial manufacturers, and many others are faced with the problem of removing oils from coolants and wastewater on an everyday basis. They are faced with high disposal and maintenance costs. Some manufacturers are charged extreme amounts to have their contaminated water treated properly by ...


    By Abanaki Corporation

  • The Challenge of Removing Surface (free-floating) Oil

    Imagine tackling your greatest production challenge quickly, easily and inexpensively. Now imagine tackling your greatest production challenge quickly, easily and inexpensively – and even generating a profit while doing so. For businesses and industries that deal with oil separation and removal, the solution does not need to be expensive or inefficient. In fact, the answer may be simpler ...


    By Oil Skimmers, Inc.

  • How do I get that oil out of there?

    It is a common question asked every day by people in all fields of industry. Machine shops, steel mills, industrial manufacturers, and many others are faced with the problem of removing oils from coolants and wastewater on an everyday basis. They are faced with high disposal and maintenance costs. Some manufacturers are charged extreme amounts to have their contaminated water treated properly by ...


    By Abanaki Corporation

  • Monroe`s Multi Stage Oil Mist Collector solves synthetic fiber plant`s oil mist problems

    Challenge A synthetic fiber plant's manufacturing operations produced a large amount of oil mist. The oil mist consisted of heavy oil droplets, smoke, and sub-micron vapors. The manufacturer required the air to be cleaned of the oil mist and other pollutants before discharge into the atmosphere. Solution The plant examined various types of oil mist ...

  • Improving energy efficiency: About oil fouling in refrigeration systems

    Introduction Most air conditioning and refrigeration systems have a mechanical compressor which relies upon lubricating oil to function. During the normal course of the refrigeration process, ½% to 8% of the compressor’s lubricating oil is circulated throughout the system along with the refrigerant. Since the early days of refrigeration and air conditioning technology, the ...


    By Power Knot LLC

  • Highland Tank 50,000 Gallon Oil/Water Separator installed at Con Ed Mott Haven Power Distribution Center

    Before the Brooklyn Bridge spanned the East River, before the Statue of Liberty first graced New York Harbor, and before skyscrapers rose above New York City's streets, the utility companies that would eventually become Con Edison were already building the energy infrastructure needed to fuel and sustain the city's growth. Today, Con Edison operates one of the largest and most complex — yet ...

  • The Mercer Advantage revealed: it`s what`s inside that matters

    The coalescing oil water separator market is littered with cheap underperforming options that cause nightmares for EHS and maintenance departments.  This video reviews the different styles of coalescers available today, and walks through what the insides will look like once your OWS is in operation. Technologies Reviewed: API Separators Plate Packs in API ...


    By Mercer International Inc.

  • Coca-Cola Refreshments Bottling Company Needham Heights, MA case study

    The Problem: The Coca-Cola Bottling Company was operating an MBR system that was not performing to maintain the flow rate required for effluent discharge. The Membrane System had rapid flux decline and the tubular membranes were being replaced every 6 months. The Solution: BioprocessH2O supplied a bioFLOW MBR System sized and designed to reduce BOD using a bioFLOW ...


    By BioprocessH2O

  • HS-200 Used in natural gas production

    A unique and proven wastewater treatment system is being used at several natural gas compressor stations. Oil leakage and spills when servicing compressors together with maintenance wash-down water, are being satisfactorily treated with oil removal systems. The systems usually consist of a wastewater holding tank with an oil drain off valve, a coalescing oil/water separator ...


    By Hydrosil International

  • Improved Effluent Treatment Systems: Australian National Railways

      An environmental audit of Australian National Railways' facilities in various States identified a serious problem with the performance of wastewater and effluent treatment systems at several sites. Implementation of cleaner production measures has resulted in improved environmental performance and cleaning efficiencies at reduced operational cost. Background In late 1995, ...


  • Comparative Testing of Corexit EC9500A, Finasol OSR52, Accell Clean DWD, and ZI 400 at Ohmsett in a Simulated Arctic Environment

    The Bureau of Safety and Environmental Enforcement (BSEE) recently conducted independent dispersant effectiveness testing. Several products were tested under simulated arctic conditions at Ohmsett. The test program was conducted to better understand the effectiveness of various dispersants under the test conditions and compare the products. The results will assist BSEE and its federal partners in ...


    By OHMSETT

  • Uses and applications of microemulsions

    Since the discovery of microemulsions, they have attained increasing significance both in basic research and in industry. Due to their unique properties, namely, ultralow interfacial tension, large interfacial area, thermodynamic stability and the ability to solubilize otherwise immiscible liquids, uses and applications of microemulsions have been numerous. The objective of this review is to ...


    By RNAS Remediation Products

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you