Oil Water Separation Applications in France
-
Premium
Chemical Water Treatment for waste water
Kurita develops products and solutions for the waste water treatment to improve the water quality and respect the legislation and the environment. Due to increased environmental sensitivity and today’s legislative restrictions, most industrial plants which use water already have wastewater treatment plants. The different Kurita Technologies carefully adapts to the needs of each plant through the optimization and improving the water quality and reducing your operating costs. Improve the water reuse in your ...
By Kurita Water Industries Ltd Office in Limonest, FRANCE.
-
Premium
Emission control solutions for oil & gas industry
In Fluid Catalytic Cracking (FCC) processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the ...
By Advanced Cyclone Systems, S. A. (ACS) Distributor in Riorges, FRANCE.
-
Premium
Gas analyzers for measuring acrylonitrile analysis in water
Monitoring of liquid matrices by Gas Chromatography using a simplified and enhanced headspace sampling system Chromatotec® presents a headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC analyzer. Speciation of sulfur compounds or VOCs is done with a MEDOR® ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Microbial testing in cooling water system industry
Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire's disease to reduced operating efficiency and eventually to equipment failure via microbiologically ...
By LuminUltra Technologies Ltd. Distributor in FRANCE.
-
Ultraviolet disinfection systems for the well injection water & SRB reduction
Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes, ...
By atg UV Systems - a brand by EVOQUA Water Technologies LLC Distributor in Treillieres, FRANCE.
-
Process equipment and technology solutions for plasticindustry - polymers industry
GIG Karasek stands for technology and plant engineering for the production, processing and recycling of polymers. We are able to offer tailor-made solutions for you. Do you have new applications, then contact us. We can also test your product in our technical ...
By GIG Karasek GmbH Distributor in Fontaines Saint Martin, FRANCE.
-
Portable and fixed gas analysers for remediation and groundwater
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
By QED Environmental Systems Distributor in Garches, FRANCE.
-
Solutions for the hydrocarbon separation
Salher® brand hydrocarbon separators are installed worldwide. Treatment flows from 0,5 to 1.000 l/s. ...
By Salher Office in Toulouse, FRANCE.
-
Aerosol and particle technology for filter testing industry
Nearly 100 test rigs for the quality assurance and the development of filters are being used worldwide with great ...
By Palas GmbH Distributor in FRANCE.
-
Comparison of BTEXS in Olive Oils by Static and Dynamic HT3 Headspace
The health benefits of consumption of olive oils as part of a healthy diet reaches back to the mid 1950’s. In the late 1990’s, interest in characterizing other components of olive oils included determining the concentration of benzene, toluene, ...
By Scion Instruments - Techcomp Group Office in FRANCE.
-
Waste water treatment solutions for automotive / aerospace
Industry challenge: Be it die casting or electroplating - the automotive and aerospace industries generate large amounts of wastewater in various production processes that can contain a wide range of ...
By KMU LOFT Cleanwater GmbH Office in Brunstatt-Didenheim, FRANCE.
-
Waste water treatment solutions for food/luxury food/animal feed/beverages
Industry Challenge: The wide range of production processes which have to comply to rigid hygienic guidelines characterizes these industries. Water consumption is high and the wastewaters can be very complex. They often contain all kinds of proteins, carbohydrates, fats and oils. These organic substances have a high chemical oxygen demand (COD). Evaporator technology produces a purified wastewater which can be re-introduced into the production cycle for efficient re-use and a sustainable resource management. As ...
By KMU LOFT Cleanwater GmbH Office in Brunstatt-Didenheim, FRANCE.
-
Waste water treatment solutions for waste disposal/recycling/remediation
Industry Challenge: The waste disposal, recycling and remediation industries produce a great variety of wastewaters. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. Typical types of metal industry wastewaters are process waters from metal recovery, metal recycling, and waste minimisation! Our evaporator technology effectively cleans process wastewaters and produces up to 98% re-usable high-quality distillate. You ...
By KMU LOFT Cleanwater GmbH Office in Brunstatt-Didenheim, FRANCE.
-
Waste water treatment solutions for metalworking/metal production
Industry challenge: In metal manufacturing and metal processing a wide variety of processes, e.g. metal cutting, surface processing and forming, are required to achieve a high-quality product. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. Typical types of metal industry wastewaters are emulsions (coolants and lubricants), separating agents (from aluminum die casting, autoclaving), cleaning waters, rinsing and ...
By KMU LOFT Cleanwater GmbH Office in Brunstatt-Didenheim, FRANCE.
-
Waste water treatment solutions for energy production & supply
Industry challenge: Energy generation, energy storage, energy use and energy transport are the main technology issues in the energy industry. This is also true for nuclear power plants. Producers want to achieve high yields of usable energy in the most efficient, economical and environmentally friendly ways. In many applications, in the production of individual components as well as in energy generation itself, water is an instrumental ingredient. In silicon processing, wastewater can contain a wide variety of ...
By KMU LOFT Cleanwater GmbH Office in Brunstatt-Didenheim, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you