oil-water separator Equipment available in Dominica

Available in Dominica| Near Dominica
239 Results found

We couldn't find any oil-water separator equipment in Dominica

Here is a list of results available in Dominica

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Water & Wastewater ×

  • Subcategory: Oil Water Separation ×

  • Keyword: oil-water separator ×

  • Available in: Latin America ×

  • Available in: Dominica ×

Oil / Water Separator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Designed according to API 421, WesTech API Oil / WaterSeparators combine state-of-the-art separation, skimming and sludge transport technologies into a highly efficient primary oil separation device.

Oil/Water Separator for Liquid Separation

by Geotech     based in Leamington Spa, UNITED KINGDOM

The high capacity cost effective low maintenance compact oil water separators utilise a highly efficient coalescing media pack. The separators are fully automatic, involve no moving parts and can be supplied for flows up to 60 lpm.

AWAS - Model HI 1999 - Freestanding Oil-Water Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Universal separator with less than 5mg/l final oil content made of stainless steel EN 1.4301/ AISI 304 for free standing installation, in a building or buried tanks. The design permits to have water inlet and outlet either in front or at the side walls. LGA Bayern tested acc. to EN 858 class I with less than 5 mg/l final oil content.

Arjay - Model 4100-OWS - Oil/Water Separator Level Monitor

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

This unique oil level system provides complete flexibility for monitoring oil water separators in one complete package. The 4100-OWS sensing probe monitors the capacitance field between the probe and the concentric shield. As the oil accumulates and displaces the water, the probe capacitance changes. This interface signal is used to provide ...

Arjay - Model 2852-OWS - Oil/Water Separator & Sump Alarm

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The sensing probe continuously monitors for the oil/water interface in a water filled sump or separator. It is typically used to control pumps, operate valves, or activate alarms. The 2852-OWS sensing probe monitors the capacitance field around the active probe tip. As the volume of separated oil increases in the separator or is drawn down toward ...

AWAS - Model Galaxie 1902 / 2002 - Oil-Water Vortex Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Oil-Water separation acc. to the vortex principle for industrial effluents with oil and grease. (successfully tested and type approved ac. To EN858 class I with less than 5 ppm residual oil) AWAS offers for the first time a flexible solution to suit individual applications - non clogging - no coalescence filter material - no corrugated plates - ...

Hopper Oil Water Separators

by Ecologix Environmental Systems, LLC     based in Alpharetta, GEORGIA (US) (USA)

Oil water separators are systems used as an efficient method to separate oils and some solids from a variety of wastewater discharges. They are typically installed in industrial and maintenance areas and receive oily wastewater. The effluent from oil/water separators is typically discharged to either a sanitary sewer system or a storm sewer. ...

Model OWS - Oil Water Separator

by Filtertech     based in Manlius, NEW YORK (USA)

In many manufacturing processes, coolants, quenchants and other aqueous solutions become contaminated with tramp, lube and hydraulic oils which detrimentally affect the process. In addition, catch basins, storm sewers and retention ponds are often mixed with motor oil, gasoline and other hydrocarbons which prevent the safe discharge to surface ...

SmartSkim - Model V1.5 - Oil Water Separators System

by Universal Separators, Inc.     based in Verona, WISCONSIN (USA)

The SmartSkim V1.5 System sets the industry standard for skimming and separating floating oil and solids from industrial fluids. The SmartSkim V1.5 Vertical System sets the industry standard for skimming and separating floating oil and solids from industrial fluids. It is designed as a simple, trouble-free solution for removing free floating and ...

SkimOil - Model ROSF Series - Oil Water Separator

by SkimOil Inc.     based in Carrboro, NORTH CAROLINA (USA)

These fiberglass units have the unique capability to be modified to fit the application, in that it has a built in oil reservoir which typically has a horizontal plate that separates it from the effluent chamber. These two chambers can be divided horizontally or vertically, or combined to fit your system needs. This unit will typically deliver an ...

SEPREMIUM - Model 5 - Oil/Water Separators

by JORC Industrial BV     based in Heerlen, NETHERLANDS

The SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems. The SEPREMIUM achieves efficient separation of oil from condensate by means of directing the condensate through various separation stages. As condensate flows in to the SEPREMIUM, the oil is filtered out through various filtration ...

SEPREMIUM - Model 2 - Oil/Water Separators

by JORC Industrial BV     based in Heerlen, NETHERLANDS

The SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems. The SEPREMIUM achieves efficient separation of oil from condensate by means of directing the condensate through various separation stages. As condensate flows in to the SEPREMIUM, the oil is filtered out through various filtration ...

API Oil Water Separator

by Hudson Industries     based in Vienna, OHIO (USA)

API Oil Water Separator with flow rates from 1 gpm to 20,000 gpm. Integrated sludge handling systems. Can operate in 20°F conditions with tank heating.

SEPREMIUM - Model 10 - Oil/Water Separators

by JORC Industrial BV     based in Heerlen, NETHERLANDS

The SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems. The SEPREMIUM achieves efficient separation of oil from condensate by means of directing the condensate through various separation stages. The SEPREMIUM achieves efficient separation of oil from condensate by means of directing the ...

Model COP - Oil Water Separator

by Environmental Compliance Equipment (ECE)     based in Stuart, FLORIDA (USA)

COP is an acronym for Coalescing Oil & Polishing. The COP-System separates and recovers emulsified and free-floating oils (non-dissolved hydrocarbons) from water solutions using a combination of filtration, coalescence, and gravity. It separates oil emulsions as fine as 0.5 micron.

OWS/ Oil Water Separators

by Hudson Industries     based in Vienna, OHIO (USA)

Specifications: Capacities from 1 gpm-8000 gpm. Gravity and Coalescing Systems. Few Moving Parts. API and AWS Design & Construction. Broad Range of Skimmers. Media Available in a Variety of Materials.

Model VTC Series - Oil Water Separators

by AFL industries     based in Riviera Beach, FLORIDA (USA)

The VTC removes hydrocarbons and settleable solids from industrial wastewater and coolant. In operation, this separator accepts industrial liquid waste in the inlet chamber. Here settleable solids fall to the bottom as sludge for periodic removal.

Model API Series - Oil Water Separator

by Pan America Environmental     based in Wauconda, ILLINOIS (USA)

API oil water separators are passive, physical separation systems designed for removal of oils, fuels, hydraulic fluids, LNAPL and DNAPL products from water. The API Series steel gravity Oil/Water Separators are designed per American Petroleum Institute (API) standards for above and below grade applications. API Oil/Water Separators are designed ...

BRUTE - Marine Oil Water Separators

by SkimOil Inc.     based in Carrboro, NORTH CAROLINA (USA)

BRUTE marine oil water separators are tough well built simple systems, designed specifically for ease of reliable operation. With simple operation, these rugged separators are shipped complete with motor, pumps, piping and controls and are ready to be easily installed and operated—without delay.

Model PetroLiminator 630M - Oil Water Separator

by EnSolve Biosystems, Inc.     based in Raleigh, NORTH CAROLINA (USA)

PetroLiminator bilge water treatment systems easily handle phase-separated and emulsified oil in bilge water. The system consistently achieves effluent concentrations of < 5 ppm oil. This automated bio-mechanical bilge water treatment system is safe, reliable, and simple to use. Unlike conventional oil water separators, the PetroLiminator ...

Need help finding the right suppliers?

Let the XPRTs do the work for you