On-site Wastewater Applications

17 Results found
Only show results available in Virginia?
OK
  • Category: Water & Wastewater ×

  • Subcategory: On-site Wastewater ×

LifeFilta R20 Container & LifeFilta TapFilta for disaster relief

by LifeFilta     based in Tongeren, BELGIUM

In any disaster relief operation, the biggest problem faced by aid agencies is the logistics and cost involved to deliver safe drinking water to the victims. We have seen plane loads of bottled water being transported to the site of the disaster, hundreds of people are hauled up to unload the cargo and finally each family gets a carton of bottled water, which may last a maximum of 3 days. Compare this with our LifeFilta straw or bottle which can last for a few years. With our LifeFilta R20 container, a family can have clean water for up to 5 - 10 years. The money and time saved by aid agencies can be diverted to other forms of aid such as food and medical supplies.

Pumping & wastewater treatment solutions for military & government sector

by Smith & Loveless Inc.     based in Lenexa, KANSAS (USA)

When Uncle Sam comes calling, Smith & Loveless has dutifully enlisted itself for service in military and civilian applications. For decades, we have served our country with honor, providing long-lasting, durable water and wastewater treatment and pumping equipment that doesn`t tax the operator with heavy-duty maintenance and operation nor require audits from procurement authorities because of its long service life rating.

Wastewater Treatment for Manufacturing

by B & V Water Treatment     based in Daventry, UNITED KINGDOM

B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

Pollutant Decontamination for the Wastewater Treatment Industry

by NANO IRON s.r.o.     based in Rajhrad, CZECH REPUBLIC

All described properties of Fe(0) nanoparticles can be even used for decomposition of pollutants contained in the waste water, mainly for treatment of industrial sewage and hutch water. The usage of nanoiron can represent a significant qualitative step in the classical technologies of water treatment including drinking water. The extremely reactive iron nanoparticles thus offer a possibility to solve long-lasting problems with a high content of uranium and arsenic in a variety of localities in the Central Europe. They can be also used for a reduction of the content of heavy metals, nitrates and phosphates in the drinking water. Just these inorganic pollutants, which are hardly or expensively removed by standard technologies, are effectively removed by Fe(0) nanoparticles. 

Odor control solutions for wastewater industry

by Ecolo Odor Control Technologies     based in Toronto, ONTARIO (CANADA)

Municipal wastewater treatment plants (wwtp) provide an essential community service that is vital for the protection of public health and the environment in which we live. Without affordable wastewater services, the quality of life within a community or municipality can be drastically diminished. Most cities, towns and communities in the US and Cananda provide wastewater treatment services, unfortunately these services and plants come with many undesirable off gasses and odors. There are a number of challenges that currently face the wastewater treatment industry including, global urban population growth, more stringent discharge regulations for industries, and demand for water conservation through wastewater reuse.

Industrial wastewater treatment plant design

by Colsen International b.v.     based in HULST, NETHERLANDS

Environmental engineering’s agency Colsen b.v. designs, specifies and executes building site direction of several kinds of wastewater treatment installations for industrial- and communal wastewater. These installations are designed to deal with the local climatological conditions and specific customer demands.

On-site refinery water treatment for oil and gas industry

by MIOX Corporation     based in Albuquerque, NEW MEXICO (USA)

MIOX offers a variety of on-site refinery water treatment solutions for cooling loops, UF & RO membranes and wastewater.

Industrial Wastewater Treatment

by ADI Systems     based in Fredericton, NEW BRUNSWICK (CANADA)

Processors are continually facing changing environmental regulations, rising costs for wastewater disposal, increasing utility costs, and a growing demand for green products manufactured using sustainable operations. These factors are driving food and beverage processors to pursue on-site wastewater treatment. ADI Systems’ wastewater treatment technology portfolio and experience can provide treatment solutions from pretreatment through to producing effluent of direct-discharge and/or water-reuse quality. Our vast experience in the food and beverage industry includes custom treatment solutions for dairy (milk, cheese, whey, yogurt, and ice cream), soft drink, fruit and vegetable processing (potatoes, corn, tomatoes), snack food, prepared meals, confectionery, and many others.

Water Treatment Solutions for Uranium Removal

by Adedge Water Technologies, LLC     based in Buford, GEORGIA (US) (USA)

AdEdge provides treatment systems for for Uranium removal using AD92 an anion exchange media that is ideal for use in potable water as well as non-potable and environmental remediation applications for removal of naturally occurring uranium. The high efficiency AD92 can selectively remove the negatively charged uranium anion (most often in the form of uranyl carbonate) to below the existing EPA MCL of 30 ug/L. The AdEdge AD92 systems can deliver the needed performance in two ways: (1) via regeneration type systems which use the media to remove the uranium with periodic regeneration using NaCl brine; or (2) as a “throw away” discardable media, which can be discarded when spent. This option maximizes the very high capacity of the AD92. Where on-site regeneration is not available, this disposal option is the preferred option. Disposal options will vary based on federal, state, and local regulations.

Wastewater Testing for the the Water Treatment Industry

by AQUAREAD Limited     based in Broadstairs, UNITED KINGDOM

There is strict regulation surrounding waste water discharge so it’s very important to conduct waste water testing in waste water environments. Aquatic ecosystems are sensitive to even small changes in the chemical make up of the water, temperature, etc. Water parameter testing before discharge allows any pollutants to be detected and prevented from entering the watercourse. Real time testing allows quick action and minimises the risk of any potential fines that might be imposed by regulatory bodies should there be any regulatory violations. The rugged AP-2000 protects the electrodes during deployment and allows all the essential parameters to be tested while it’s portable design means that the device can be easily carried between locations. You can also save money on site visits by using telemetry.

Odor control solutions for public commercial buildings

by Ecolo Odor Control Technologies     based in Toronto, ONTARIO (CANADA)

Every city and town in North America, South America, Europe, Middle East and the Pacific Rim is a target rich environment and susceptible to odor control concerns. Look no further then the nearest apartment complex, hospital, hotel, fast food outlet or retirement home. Shopping malls, grocery stores and entertainment complexes are also likely clients and application areas. Stop to consider the number of food processors, manufacturing/industrial operations, waste haulers, landfill or wastewater treatment sites in your area where persistent and nuisance odors are a constant public concern.

Measuring Fats, Oil and Grease (FOG) in Wastewater

by Spectro Scientific     based in Chelmsford, MASSACHUSETTS (USA)

It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oil and Grease (FOG). With significant growth in the commercial food sector on top of other high FOG producing industries such as metal processors, meat packers, cosmetic manufacturers and industrial laundry establishments, the need for publicly owned treatment plants (POTWs) and industries to regulate and monitor FOG is crucial to public health. Besides clogged sewer lines, high FOG levels also disrupt the effective operation of a wastewater treatment plant. An important feature of any FOG program is locating and monitoring high oil and grease producing industries and food service establishments. InfraCal TOG/TPH Analyzers provide a simplified procedure for FOG analysis based on solvent extraction and infrared absorption which can give the regulator or operator an on-site result in less than 10 minutes.

Process Design

by Yates Environmental Services     based in Spokane, WASHINGTON (USA)

Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems • Hydrogen sulfide and odor control • Decentralized treatment systems • Process optimization / operations assistance • Conceptual and strategic water planning

Sewer Meter -

by Solid Applied Technologies Ltd. (SolidAT)     based in Ashkelon, ISRAEL

Sewer Meters monitor sewage level and flow within the sewers. Benefits gained by sewer monitoring include: (1) Detection of overflow conditions before overflow occurs thereby preventing hazardous environmental events. (2) Detection of blocked sewer pipes, allowing quick and focused maintenance thereby reducing maintenance costs. (3)Detection of over-used and under-used pipes for long term municipal planning. (4) Monitoring of sewage flow in sensitive sites such as flow to the river or sea. (5) Estimation of sewage flow for costing purposes and especially for pricing the use of public infrastructure by industrial plants. The sewer meter solution consists of two main components: (1) The fielded component includes GaugerGSM, an ultrasonic non-contact level sensor integrated with GSM cellular transmitter. The fielded component also includes accessories such as external battery pack. (2) A web-based monitoring application for presenting data from all sewer sites.

Waste Treatment for Sludge

by MENART     based in Dour, BELGIUM

Town development provokes an increase in the number of used-water treatment sites. In turn, these factories generate silt which must be treated. Therefore, MENART develops and equips silt treatment purification stations with: Corridor turners for silt drying. Sludges mixers with green waste coupled to a sieve. Green waste shredders. Jigger-mixers. Once treated, these sludges can be spread to enhance farming.

Tertiary water treatment

by DEVISE ENGINEERING S.A.     based in Athens, GREECE

DEVISE ENGINEERING designs and constructs autonomous packaged systems for Tertiary Treatment aimed for water recovery and re-use. The systems comprise of pre-engineered and prefabricated units all installed inside an appropriately modified ISO container for easy deployment and quick installation and start-up.

Mining & minerals solutions for man camps industry

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

In remote locations and mine sites distant from the nearest outpost, WesTech provides package plants for water treatment and for wastewater process that allow for drinking water to be made onsite and basic levels of sanitary safety to be met, allowing for continued production and a healthier site and workforce.

Need help finding the right suppliers?

Let the XPRTs do the work for you