We couldn't find any penstocks suppliers or service providers located in Maine
Here is a list of companies serving Maine
Penstocks Manufacturers, Suppliers & Companies (Water And Wastewater) Serving Maine
-
Distributorbased in Greenwich, CONNECTICUT (USA)
Flowmeter Services is a group of industry professionals with extensive experience in the hydroelectric and water resources industries. Flowmeter Services specializes in the design, sale and installation of multipath transit time ultrasonic flow ...
-
Manufacturerbased in ŠIBENIK, CROATIA
We in TEKO Ltd. company are proud of our products and services as well as our ability to deliver equipment for diverse implementations in water supply, sewage and specially water treatment. We are focused on delivering of high quality equipment for ...
-
Distributorbased in West Midlands, UNITED KINGDOM
The Flow Control Group includes businesses with industry recognised experience in supplying bespoke solutions to the Water, Industrial and Oil and Gas sectors. The Group brings together Cotswold Valves Limited, Flow Control Company Limited, ...
Installation & Turnkey Solution
The Flow Control Group specialise in supply, installation and commissioning of actuated valve & penstock packages, offering clients turnkey solutions. Be it actuating existing manual valves, replacing obsolete actuators or changing power source ...
CONTACT SUPPLIER -
Manufacturerbased in Lacq , FRANCE
Deltafluid is a French company specialized in designing and manufacturing flow & temperature measurement systems and pressure & flow control devices. Located next to the largest natural gas field discovered in France (Lacq, South-West), the company ...
-
Manufacturerbased in Nürnberg, GERMANY
BÜSCH Technology – 35 years development of penstocks and extensions. As a global company with its own production sites and more than 100 employees at three sites, we convince with telescopic extensions, penstocks, actuation systems and dismantling ...
Model XL3 - LT - Lowering Type Sluice Gate
Lowering type penstocks get open by moving the plate downwards. The water will flow over the plate when the penstock is open. Lowering type penstocks get used in application, where it is important to hold the water-level ...
CONTACT SUPPLIER -
Manufacturerbased in Thierhaupten, GERMANY
The company penstocks.de GmbH, situated in the Federal Land of Baden-Württemberg in Southern Germany, In 1997, penstocks.de was founded by engineer and entrepreneur Karl-Otto Trawniczek. During the 20 years of its existence, penstocks.de has been ...
Penstocks - Channel Penstock with Slide Rails
Usable for installation in channels and ...
CONTACT SUPPLIER -
Manufacturerbased in Biddinghuizen, NETHERLANDS
Since 2007, KWT Group B.V. is a part of the Bergschenhoek Groep B.V. Within the Bergschenhoek Groep, the in 1988 founded company is responsible for production, delivery and assembly of water management products. Since its conception, KWT has ...
Model KOAS I and KOAS II - Channel Penstock
The KWT Channel Penstocks / Sluice Gates have a wide scope of deployment and are being specified for surface water, process water and sewer applications. The KWT Channel Penstock is available in a single spindle version (KOAS I) and in a double ...
CONTACT SUPPLIER -
Publishing companybased in Tulsa, OKLAHOMA (USA)
PennWell’s Hydro Group offers advertising options for both print and digital mediums. Whatever your objectives in reaching hydro decision makers, we can work with you to reach them! PennWell’s Hydro Group offers a wide variety of marketing services. ...
Canals, Tunnels & Penstocks
Considerations in the design, construction, maintenance and repair of cannels, tunnels and penstocks associated with hydroelectric ...
CONTACT SUPPLIER -
Manufacturerbased in Norwich, UNITED KINGDOM
Althon Ltd manufacture and distribute specialist water management products to the construction industry. We design and manufacture precast concrete headwalls to meet Sewers for Adoption and Severn Trent Guidelines. Our product range includes flap ...
Althon - Model 200mm - Inline Penstock
Althon 200mm inline penstocks are used in Althon Inline Penstocks can be used in surface, sewer and water process applications. Inline penstocks are a simple and highly effective way to prevent water backflow into a system. Our inline penstocks can ...
CONTACT SUPPLIER -
Manufacturerbased in Otterup, DENMARK
PROAGRIA is the leader for advice and manufacture of industrial fittings applied for media flow control in water supply waste water systems, agriculture, fish farming, and industrial systems.Experience gained designing liquid media regulation and ...
RIA SPP - Model DN 100-150 - Sluice Gate
Not 100% tight Wall mounting. Framme: EN 1.4301 Plate: PEHD 500. On and off-seating pressure, max. 3 bar DIN 19569 table 4 ...
CONTACT SUPPLIER -
Engineering service providerbased in King, ONTARIO (CANADA)
Advanced Construction Techniques (ACT) provide specialized contracting services for the Civil and Geotechnical Engineering industry. We provide a wide range of ground modification and seepage control services including large dam seepage cut-off ...
-
Manufacturerbased in Denver, COLORADO (USA)
Levelese, Inc. offers water level sensors used for reliable hydro water level measurement from penstocks to upstream monitoring and seamlessly interfaace with most display and recording devices. Levelese continuous liquid level system: the simple, ...
-
Manufacturerbased in Victoria, BRITISH COLUMBIA (CANADA)
ASL Environmental Sciences Inc. (ASL), of which ASL AQFlow is a wholly-owned subsidiary, has been carrying out successful flow velocity measurement programs in difficult ocean environments from the Arctic to the tropics with acoustic scintillation ...
ASL-AQFlow - Model ASFM - Acoustic Scintillation Flow Monitor
Once it has been calibrated, the ASFM Monitor provides reliable, accurate and repeatable, long-term real-time monitoring of turbine discharge. It has been developed for use in low-head, short-intake plants, but can be used in higher head plants as ...
CONTACT SUPPLIER -
Manufacturerbased in Bajo, SPAIN
Válvulas Zubi S.L. has been manufacturing valves since 1979, in the beginning we focused on the exclusive manufacture of diaphragm valves, a field in which the company has earned a prestigious reputation. Later, we expanded our production range and ...
Valvulas - Wall Penstocks Valves
Unidirectional or bidirectional valves whose dimensions and design depend on the customer’s specific needs (square or rectangular section). These valves ensure watertightness on all four sides, made even more effective by a wedged system which ...
CONTACT SUPPLIER -
Manufacturerbased in St-Laurent, QUEBEC (CANADA)
Fabgroups Technologies Inc. has a licensing agreement with Hydro Québec to develop, manufacture and market a rotary kiln equipped with an electric plasma torch. Plasma-assisted sludge oxidation (PASOFabgroups Technologies Inc.) is an emerging ...
-
Manufacturerbased in Athol, MASSACHUSETTS (USA)
Whipps, Inc. is a privately-owned company, founded in 1977 by George and Pauline Whipps. Since the company's inception, Whipps, Inc. has steadily increased market share by manufacturing water control gates of the highest quality and highest ...
-
Manufacturerbased in Maidstone, UNITED KINGDOM
We are market leaders distinguished by our industry expertise, we have been designing and manufacturing specialist engineered valves and penstocks for more than 170 years and we stand behind every product we install for life, offering some of the ...
Orbinox - Hand Stop or Stop Gate Penstock
The ORBINOX model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power ...
CONTACT SUPPLIER -
Manufacturerbased in Heidenheim, GERMANY
ATEC GmbH - founded 2001 in Heidenheim, Germany - stands for: Planning to installation from a single source, Made in Germany, Wide range of materials from steel to super duplex, Own facility for pressure testing of penstocks up to DN 2800, Precision ...
ATEC - Model ECOTEC - Penstock (Lightweight)
Dimensions: 150 x 150 up to 300 x 300 and 4 ...
CONTACT SUPPLIER -
Manufacturerbased in Glasgow, UNITED KINGDOM
Waterfront Fluid Controls Ltd is a specialist designer, manufacturer and installer of fluid control equipment and from its offices in Glasgow, has developed from supplying skilled labour to having a complete range of fluid control products. Our ...
Waterfront - Stainless Steel Wall Mounted Penstocks
The primary application of Waterfront Wall Mounted Penstocks is the flow control and isolation of fluids associated with water, sewage treatment plants, power generation irrigation schemes and process ...
CONTACT SUPPLIER -
Manufacturerbased in Ipswich, AUSTRALIA
Australian Water Engineers is a niche market supplier of flow control equipment. If it bolts to concrete and controls flow, and it is made from a non-ferrous material, then AWE are the experts to talk to. Engineering expertise is considerable and is ...
Penstocks
This is a term that probably came from Britain. It refers to a gate that controls the flow of water and is operated by a stem (or spindle). There are many variations used. In Australia penstock is pretty much the generic name. In New Zealand if the ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you