Penstocks Equipment For Water And Wastewater Available In Benin
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement ...
-
Manufactured by penstocks.de GmbHbased in GERMANY
Usable for installation in channels and ...
-
Manufactured by Waprobased in DENMARK
Tight from mounting side Wall mounting. Frame: EN 1.4301 Plate: PEHD 500. On and off-seating pressure, max. 3 bar DIN 19569 table 4 ...
-
Manufactured by Superlit Boru San. A.Sbased in TURKEY
Although standard lengths are 6 m and 12 m, SUPERLIT GRP pipes can be manufactured with the lengths required, only limited by transportation capabilities. Comprising of thermosetting resin and silica sand reinforced with glass fiber, a GRP pipe is a composite material that has flexible ...
-
Manufactured by ATEC GmbHbased in GERMANY
Dimensions: 150 x 150 up to 1200 x ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT penstocks are available in various designs and are used in surface, sewage and process water systems. This sluice gate is a tried and tested penstock model, as it has been a core product for many years. The KSA-MD sluice gate is a spindle operated and reinforced sliding plate that shuts off a round or square opening; it moves within a stainless steel 316L frame with HDPE guides. The tight ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
The KSA-MD is a unique, tried and tested fabricated penstock model that has been stainless steel frame with HDPE guides. In seating conditions, water tightness is rated at medium range, up to 5 MwC, and is achieved by using an EPDM lip seal positioned in the sliding ...
-
Manufactured by Waprobased in DENMARK
Tight from mounting side.Appllication as way and motorway sluice.Materials:Frame: EN 1.4404 - PEHD 500.Plate: EN 1.4404. Pressure: On-seating pressure, max. 4 mWs.DIN 19569 table 4 ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IB/AS Combination operators are Multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
The HOS/MPR gear operators are manufactured from high quality materials and life tested ensuring that maximum performance, quality and reliability are consistently maintained. Operating temperature normally ranges from -40 ºC to 120 ºC, although other temperature ranges are available on ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT Stop Logs (KSL) are similar to the KWT Stop Board in functionality. The logs can be rackstored, and come in many variations (sizes, thickness, material). They are used in surface-, sewer- and process water systems. A full stop log is composed from individually removable aluminum ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT weirs are very varied and are used in surface, sewage and process water systems. The KOS system is a vertical gate that allows a constant adjustment of the upstream water level and can be used to keep the upstream water level at a desired level. The water flows over the gate thus creating an overshot, and allows for very accurate adjustment of the water flow. These KWT weir penstocks can be ...
-
Manufactured by Jash Engineering Limitedbased in INDIA
Short length / open top frame provided with short Length extension guides sufficient to engage at least half the overall vertical height of slide / door when the gate is full open. Slide sufficiently ribbed to suit the applicable water head and designed to suit rising stem requirement. Slide provided with integral pocket to house threaded stem connecting block connecting the slide with the ...
-
Manufactured by ENTA Treatment Systems Engineering Contracting Corporationbased in TURKEY
Wall type penstocks are used to control the flows in the tanks at the water and wastewater treatment plant and to provide the isolation. At all designs of ENTA especially the impermeability is provided by the use of the P,V and double-lipped seals besides the four side of the penstocks and for 1 m seal length (at the pressure of 5 m on seat or 4 m off-seat), there is reached to the very low ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
We can manufacture our hump gate seals in two standard formats. Either with a single or double hump depending on the application. Hump seals are generally used for sealing the top edge of submerged vertucal-lift gates. Our hump seal are typically bolted either side of the hump or the flat stem section of the profile. The hump section is then pressed against the sealing surface. The flexibility of ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT has operation- and mounting accessoires availeble for all there products, we help you to create a perfect fit for all ...
-
Manufactured by penstocks.de GmbHbased in GERMANY
Usable for installation at inlets and outlets of chambers and basins. Suitable for throttling and regulating purposes. Sealing on 4 faces. For on- and off-seating pressure. Low operation forces.Dimensions: available up to the largest ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our omega gate seals are often used to create an internal seal between two surfaces on underwater tunnels. These seals generally perform as a membrane as they are exposed to three dimensional movements between the tunnel sections. Omega seals can also be reinforced with fabric in order to enhance the seal with additional mechanical properties. We can increase or decrease the number of fabric ...
-
Manufactured by Fernco Ltdbased in UNITED KINGDOM
HDPE Penstocks from Fernco, previously know as Flexseal, provide a high strength, easy to install solution to control the flow of water and ...
-
Manufactured by BIOGEST AGbased in GERMANY
High grade, robust, flat penstock made of 304 stainless steel, for Installation in front of the inlet or outlet of a shaft construction, according to German Institute for Standardization (DIN) 18202. The penstock of BIOGEST is sealed to all 4 sides, according to DIN 19569, part 4, constructed for closing / opening a wall inlet or outlet opening and is bolted directly to the wall. Penstock and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you