Penstocks Equipment For Water And Wastewater Available In Latin America
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
The KSA-HD penstock is verry suiteble for industrial and high demanding sewer projects. Reliability is key in this ...
-
Manufactured by BIOGEST AGbased in GERMANY
With an underwater blockage the water-level difference is recalculated and the desired flow rate controlled. To avoid hydraulic overload of sewerage systems and waste water treatment facilities, storm water retention systems must be created. They are required to store large quantities of combined sewage and rainwater during storm conditions and regulate the flow to match the capacity of the ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use: Pump-turbines are used in pumped-storage hydropower plants (PSP). Their role in the electrical grid system is to store non used energy by transforming it to the potential energy of water. Pump-turbines can work either as a pump to store water in an upper reservoir or as a turbine to use the water to generate power. An additional role of pump-turbines and PSP ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
The function of the penstock and main inlet valves is to isolate the unit and completely cut-off the water flow on the location where such valve is installed. The usual types of such valves are spherical valves and butterfly valves. They usually serve as a safety device and are capable of closing at the maximum water discharge. Main inlet valves are positioned between the penstock and the turbine ...
-
Manufactured by ATEC GmbHbased in GERMANY
Dimensions: 150 x 150 up to 1000 x ...
-
Manufactured by Waterfront Fluid Controls Ltdbased in UNITED KINGDOM
Waterfront’s range of channel mounted penstocks with associated operating equipment will cater for the most demanding specification and ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our double P gate seals provide many of the same sealing properties found in our standard P gate seals. The main difference between the two, is that our double p seals enable you to seal against two surfaces using a single profile. The bulbs can compress under pressure in order to create a watertight seal. Double P gate seals typically secured and bolted through the stem to provide bulb ...
-
Manufactured by Adams Armaturen GmbHbased in GERMANY
The combined function valve GZA is a combined shut-off and check valve featuring a closure weight and hydraulic controls. Its closure system works reliably, even in the event of a complete power ...
-
Manufactured by penstocks.de GmbHbased in GERMANY
Usable for installation at inlets and outlets of chambers and ...
-
Manufactured by PXL Industriesbased in FRANCE
PXL SEALS specializes in sealing systems for energy markets where performance, downtime, technical and economic considerations play a large ...
-
Manufactured by penstocks.de GmbHbased in GERMANY
Usable for installation at inlets and outlets of chambers and basins ...
-
Manufactured by Darling Pumpsbased in INDIA
Slurry is a mixture of solids and liquid, generally water. The particles can be both abrasive & nonabrasive, although abrasive particles are very much common. The purpose to move slurry can be transporting as much solids particles as possible, hydraulically, along with the given liquid. There are many factors to be considered while selecting a slurry pump like; Particle size- Specific gravity of ...
-
Manufactured by Potential Engineeringbased in INDIA
Weir gate is used to control and regulate of fluids associated with water, waste water, sewage treatment plants, power generation, irrigation schemes and process plants. Sizes range from 150mm to 2000mm. It can be made in Circular, Rectangular or Square section. Selection of the correct Weir gate to suit the duty is important to satisfy the design criteria and provide the most cost effective ...
-
Manufactured by BIOGEST AGbased in GERMANY
Storm detention systems are required in order to prevent the hydraulic overloading of sewerage networks and the waste water treatment plants at the end of the line. The task of these systems is to provide a buffer for the considerable amount of rainwater produced in wet weather conditions and to regulate its onward flow in a controlled manner. Low control systems are required to protect items of ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
Adjustable weirs are mostly utilised for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by PMC Engineering Turkeybased in TURKEY
Size: 200 x 200 mm up to 4000 x 4000 mm. Pressure: up to 1.0 bar for rectangular openings, Mounting with chemical anchor ...
-
Manufactured by Sistag AGbased in SWITZERLAND
Design: 3- or 4-sides tight, Drain seal, Steel fabricated construction with fully guided gate. Width: 700 - 4000 mm. Material: 1.4404 (316L)/ PE-UHMW. Actuation all type.Main applications:Water & Waste Water ...
-
Manufactured by Hydro Power Plant SAS (HPP)based in FRANCE
Gates, trashracks, trashracks cleaners and cranes are part of HPP ...
-
Manufactured by Ekotek Construction Trade and Industry Ltdbased in TURKEY
The main application of penstocks is the control of flow and isolation of fluids in water and wastewater treatment plant, imgatlon works, power plants, etc. According to place of aplication they are classffied In two broad ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you