Penstocks Equipment For Water And Wastewater Available In Alaska
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement ...
-
by Synterprisebased in USA
The Traxtor series of robotic crawler platforms are designed specifically for the rigorous environment of uncleaned plant equipment – spray dryers, boilers, tanks, stacks, etc. The twin drive track units equipped with powerful permanent magnet pads and unique suspension system enable the robot to traverse a wide variety of ferrous ...
-
Manufactured by Potential Engineeringbased in INDIA
Weir gate is used to control and regulate of fluids associated with water, waste water, sewage treatment plants, power generation, irrigation schemes and process plants. Sizes range from 150mm to 2000mm. It can be made in Circular, Rectangular or Square section. Selection of the correct Weir gate to suit the duty is important to satisfy the design criteria and provide the most cost effective ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
Adjustable weirs are mostly utilised for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open ...
-
Manufactured by BIOGEST AGbased in GERMANY
Storm detention systems are required in order to prevent the hydraulic overloading of sewerage networks and the waste water treatment plants at the end of the line. The task of these systems is to provide a buffer for the considerable amount of rainwater produced in wet weather conditions and to regulate its onward flow in a controlled manner. Low control systems are required to protect items of ...
-
Manufactured by BĂśSCH Technology GmbHbased in GERMANY
Lowering type penstocks get open by moving the plate downwards. The water will flow over the plate when the penstock is open. Lowering type penstocks get used in application, where it is important to hold the water-level ...
-
Manufactured by Bisan Inc.based in CANADA
BISAN represents two of the leading manufacturers of fluid control products with a long and successful installation lists in both Canada and the Middle ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Manufactured by Ekotek Construction Trade and Industry Ltdbased in TURKEY
The main application of penstocks is the control of flow and isolation of fluids in water and wastewater treatment plant, imgatlon works, power plants, etc. According to place of aplication they are classffied In two broad ...
-
Manufactured by Glenfield Invicta Ltd.based in UNITED KINGDOM
The ORBINOX model AG Stop Gate is designed for open channel installation in waste water treatment plants, irrigation, hydraulic works and hydro-electric power ...
-
Manufactured by penstocks.de GmbHbased in GERMANY
Usable for installation in channels and ...
-
Manufactured by Tehnika Plast-Wastewater Solutionsbased in SERBIA
Tehnika plast J.B. d.o.o produce Penstocks according to the client's request. We are producing equipment for wastewater treatment over 10 years. More information and photos on our web page: http://tehnikaplast.com/tablasti-zatvaraci-2/ or web page in English: ...
-
Manufactured by Hydro Power Plant SAS (HPP)based in FRANCE
Gates, trashracks, trashracks cleaners and cranes are part of HPP ...
-
Manufactured by Sistag AGbased in SWITZERLAND
Design: 3- or 4-sides tight, Drain seal, Steel fabricated construction with fully guided gate. Width: 700 - 4000 mm. Material: 1.4404 (316L)/ PE-UHMW. Actuation all type.Main applications:Water & Waste Water ...
-
Manufactured by PMC Engineering Turkeybased in TURKEY
Size: 200 x 200 mm up to 4000 x 4000 mm. Pressure: up to 1.0 bar for rectangular openings, Mounting with chemical anchor ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our P seals or “music note seals” as they are also known, are available in two different formats. Depending on the load deflection criteria we may suggest either a solid or hollow bulb. The hollow bulb format is more suitable for use in low hydrostatic pressures. While the solid bulb format is less prone to compression. When under pressure, either the bulb or stem can create a seal. ...
-
Manufactured by Galliford Trybased in UNITED KINGDOM
Cast Iron penstocks are circular or rectangular metal faced penstock suitable for wall and flange mounting application, suitable for on-seating pressure as standard but, dependent on size, will take a degree of off-seating ...
-
Manufactured by Althon Limitedbased in UNITED KINGDOM
Althon 200mm inline penstocks are used in Althon Inline Penstocks can be used in surface, sewer and water process applications. Inline penstocks are a simple and highly effective way to prevent water backflow into a system. Our inline penstocks can be flanged mounted or coupled onto existing pipework. Our 200mm inline penstocks can be operated manually with a T – key or handwheel or with an ...
-
Manufactured by BIOGEST AGbased in GERMANY
To avoid hydraulic overloads of sewerage and waste water treatment facilities; CSO systems, and storm water detention tanks must be created. These systems will store excess flow during storm events and regulate the onward flow to treatment. The pass forward flow rate needs to be carefully controlled to avoid hydraulic overload of the downstream system. It is important that the flow form these ...
-
Manufactured by Válvulas Zubi S.L.based in SPAIN
Unidirectional or bidirectional valves whose dimensions and design depend on the customer’s specific needs (square or rectangular section). These valves ensure watertightness on all four sides, made even more effective by a wedged system which exerts pressure on the closing joint when the penstock is located in its closed position. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you