Penstocks Equipment For Water And Wastewater Available In Wisconsin
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement ...
-
Manufactured by Remote Inspection Technologies (RIT)based in USA
RIT's Long Range Crawler is the solution to long pipe inspections with limited entry points. Able to inspect more than a mile of pipe in a single run, the long rang crawler includes 3 onboard video cameras, multiple sensor options, and is operable in pipe as small as 12in / 300mm internal diameter. These units are configurable for round pipe or flat surface operation, and adjustable for a range ...
-
Manufactured by penstocks.de GmbHbased in GERMANY
Usable for installation in channels and ...
-
Manufactured by Waprobased in DENMARK
Tight from mounting side Wall mounting. Frame: EN 1.4301 Plate: PEHD 500. On and off-seating pressure, max. 3 bar DIN 19569 table 4 ...
-
Manufactured by Superlit Boru San. A.Sbased in TURKEY
Although standard lengths are 6 m and 12 m, SUPERLIT GRP pipes can be manufactured with the lengths required, only limited by transportation capabilities. Comprising of thermosetting resin and silica sand reinforced with glass fiber, a GRP pipe is a composite material that has flexible ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT has operation- and mounting accessoires availeble for all there products, we help you to create a perfect fit for all ...
-
Manufactured by penstocks.de GmbHbased in GERMANY
Usable for installation at inlets and outlets of chambers and basins. Suitable for throttling and regulating purposes. Sealing on 4 faces. For on- and off-seating pressure. Low operation forces.Dimensions: available up to the largest ...
-
Manufactured by American Tank Companybased in USA
American Tank Company is an approved applicator for Polibrid Coatings – a field proven coating product for more than 20 years. Polibrid is a solventless, 100% solids by volume elastomeric polyurethane that is applied by plural-component spray equipment at virtually any film thickness at temperatures as low as 25° F. It can be placed in immersion service immediately, providing rapid ...
-
Manufactured by The Rubber Companybased in UNITED KINGDOM
Our omega gate seals are often used to create an internal seal between two surfaces on underwater tunnels. These seals generally perform as a membrane as they are exposed to three dimensional movements between the tunnel sections. Omega seals can also be reinforced with fabric in order to enhance the seal with additional mechanical properties. We can increase or decrease the number of fabric ...
-
Manufactured by Fernco Ltdbased in UNITED KINGDOM
HDPE Penstocks from Fernco, previously know as Flexseal, provide a high strength, easy to install solution to control the flow of water and ...
-
Manufactured by BIOGEST AGbased in GERMANY
High grade, robust, flat penstock made of 304 stainless steel, for Installation in front of the inlet or outlet of a shaft construction, according to German Institute for Standardization (DIN) 18202. The penstock of BIOGEST is sealed to all 4 sides, according to DIN 19569, part 4, constructed for closing / opening a wall inlet or outlet opening and is bolted directly to the wall. Penstock and ...
-
Manufactured by BIOGEST AGbased in GERMANY
The SA can be used when it is desirable to completely close a chamber inlet/outlet at a pre-determined water level within the chamber. The SA can be used to limit the top water level as well as a non-return valve. The SA is a reliable non-powered alternative to an electrically actuated ...
-
Manufactured by Althon Limitedbased in UNITED KINGDOM
Althon 150mm inline penstocks are used in Althon Inline Penstocks can be used in surface, sewer and water process applications. Inline penstocks are a simple and highly effective way to prevent water backflow into a system. Our inline penstocks can be flanged mounted or coupled onto existing pipework. Our 150mm inline penstocks can be operated manually with a T – key or handwheel or with an ...
-
Manufactured by Castings Services Group (CSG)based in UNITED KINGDOM
CSG supply a variety of isolation valves suited to water, waste water and gas ...
-
Manufactured by Herrenknecht AG.based in GERMANY
The Raise Boring Rig (RBR) developed by Herrenknecht is designed for the construction of shafts in rock down to 2,000 meters in depth. Thanks to its compact design, it offers high flexibility even under space constraints and is therefore suitable for various applications in the mining industry. It has proven its worth with its modular design and its efficient center-free drive. Connection shafts ...
-
Manufactured by E. Beaudrey & CIE.based in FRANCE
The water enters the BOXWIP concrete pit through the upstream aperture, flows through the bar rack which is periodically cleaned by a wall-plate mounted “CV” type rake. The wall-plate is slid into the wall ...
-
Manufactured by Sorgent.e Srlbased in ITALY
STE energy has consolidated experience in building water lifting systems by designing, supplying and installing. civil engineering works, penstocks and mass oscillation and pressure surge control systems draining pumps and centrifugal pumps. automation, protection, control and remote management systems. electric power systems and power centres (star-delta start-up systems, soft starters, ...
-
Manufactured by BIOGEST AGbased in GERMANY
Traditional methods of flow control were crude devices that required manual input with a change of head to readjust the flow. This is now both impractical and inefficient. Modern drainage systems demand intelligent and accurate methods of flow control that automatically re-adjust with changes in the water level. Although it is possible to carry out this function simply with a power supply. Most ...
-
Manufactured by ASTIM A.S.based in TURKEY
The primary application of penstocks is the flow control and isolation of fluids associated with water, waste water, sewage treatment plant, power generation, irrigation schemes and process plant. Section of the correct penstock to suit the duty is important to satisfy the design criteria and provide the most cost effective solution. Operation of the penstock is governed generally by factors ...
-
Manufactured by Perrier Sorembased in FRANCE
Square orifice of 200 x 200 to 600 x 600 mm. Max head of water at the threshold: 5 mCE Watertightness: 2 directions, 4 sides. Manoeuvring components: T-wrench, handwheel, jack, pneumatic or hydraulic cylinders and electric ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you